Brocade Network OS Command Reference v4.1.0 Manual de usuario Pagina 114

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 113
76 Network OS Command Reference
53-1003115-01
chassis virtual-ip virtual-ipv6
2
chassis virtual-ip virtual-ipv6
Sets the IPv4 or IPv6 address of a switch chassis.
Synopsis chassis {virtual-ip | virtual-ipv6}
no chassis {virtual-ip | virtual-ipv6}
Operands virtual-ip Sets an IPv4 address in dotted-decimal notation with a CIDR prefix (mask).
virtual-ipv6 Sets an IPv6 address in colon-separated hexadecimal notation with a CIDR
prefix.
Defaults None
Command Modes RBridge ID configuration mode
Description Use this command to change the IPv4 or IPv6 address of a chassis from the default. The default is
the initial address of the switch chassis.
Usage Guidelines This is the address that is used to access devices through their RBridge ID. Use this command to
change the IP address to facilitate management, for example, if a switch is moved to a different
subnet. The IP address of the management platform should be in the same subnet as the devices
it manages.
This command applies only to chassis switches, for example, the Brocade VDX 8770.
Use the no form of this command to revert to the default address.
Examples IPv4:
switch(config)# rbridge-id 4
switch(config-rbridge-id-4)# chassis virtual-ip 10.11.12.13/20
IPv6:
switch(config)# rbridge-id 4
switch(config-rbridge-id-4)# chassis virtual-ipv6 2001:db8:8086:6502/64
See Also show rbridge-id, show running-config
Vista de pagina 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 140 141

Comentarios a estos manuales

Sin comentarios