Brocade DCX 8510-4 Backbone Hardware Reference Manual Manual de usuario descargar pdf (Pagina 104)

4. Replace the control processor blades (CP8) (Control processor blade (CP8) removal and

replacement on page 69).

5. Replace the core switch blades (CR16-4) (Core switch blade (CR16-4) removal and replacement on

page 78).

6. If ICL cables are not used, insert EMI plugs in the ICL sockets in the core switch blades (CR16-4).

7. Replace the port blades or filler panels (Port, application, and encryption blade removal and

replacement on page 64 and Blade filler panel removal and replacement on page 68).

8. Replace the cable management finger assemblies (Vertical cable management fingers removal and

replacement on page 63).

9. Connect the power cords to the power supplies and the power outlets.

10.Replace the chassis door (Chassis door removal and replacement on page 62).

11.Power on the Brocade DCX 8510-4 (Installing components into the new chassis).

The Brocade DCX 8510-4 performs a power-on self-test (POST). The POST takes a minimum of

three minutes and is complete when LED activity returns to the standard state.

12.Verify that the Brocade DCX 8510-4 is powered on and POST is complete (all power LED indicators

on the blades should be a steady green).

13.Verify that all components are functioning correctly by checking their LEDs. If the LEDs do not

indicate correct operation, try reinstalling the corresponding component.

Downloading the configuration

Once the chassis and its various components have been reassembled and powered back on, use the

configDownload command to restore the original configuration. The configDownload command can

be entered through a Telnet or serial session, but the Brocade DCX 8510-4 must have an Ethernet

connection to the server name or IP address of the host for the download process to complete. For

more information, refer to the help configdownload command or the Fabric OS Command

Reference.

Complete the following steps to download the configuration.

1. Log in to the Brocade DCX 8510-4 as admin.

switch:admin> login

password: xxxxxxxx

switch:admin>

NOTE

If you are using the Virtual Fabric feature, you must run configdownload -vf before running the

configdownload command to restore the logical switch configuration.

2. Enter the chassisDisable command.

3. Enter the configDownload command.

switch:admin> configdownload -all

Server Name or IP Address [host]: 123.123.123.123

User Name [None]: Admin24

File Name [config.txt]: config-switch.txt

Password: xxxxxxxx

download complete

switch:admin>

4. Reboot the Brocade DCX 8510-4.

Downloading the configuration

104 Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-07

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 155 156

Comentarios a estos manuales

Sin comentarios

Brocade DCX 8510-4 Backbone Hardware Reference Manual Manual de usuario Pagina 104

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade DCX 8510-4 Backbone Hardware Reference Manual