Brocade DCX 8510-8 Backbone Hardware Reference Manual Manual de usuario descargar pdf (Pagina 102)

Blade Transceiver Auto-negotiate/Fixed Speeds supported(xGbps)

FC8-64 mSFP Auto negotiate 2, 4, and 8.

FC16-32 and FC16-48 SFP+ Auto negotiate 2, 4, 8, and 16

FC16-32 and FC16-48 10-Gbps SFP+ Fixed 10

FC16-64 QSFP Auto negotiate 4, 8, and 16. However, all the four

ports within a quad-SFP should be

of the same speed.

CR16-4/8 QSFP Fixed 16

Time Required

The replacement procedure for a transceiver takes less than five minutes.

Items Required

• Replacement mSFP, SFP, SFP+, or XFP

• Optical transceiver extraction tool (for SFP, SFP+, and XFP transceivers)

Most Brocade switches and backbones come with a transceiver extraction tool and holster. The

extraction tool is designed to remove transceivers from switches and blades where the space is

limited.

FIGURE 29 Optical transceiver (SFP+) extraction tool

Removing an SFP+ transceiver

Complete the following steps to remove an SFP+ transceiver.

1. Remove any cables that are inserted into the transceiver. Use the extraction tool to open the cable

latching mechanism.

2. Using the hooked end of the tool, pull the bail (wire handle) away from its pivot point and out, sliding

the transceiver out of the switch or blade.

The 16 Gbps SFP+ transceivers have an attached pull tab like the mSFPs. Instead of using the tool,

simply grasp the pull tab and pull straight out to remove the 16 Gbps SFP+ from the switch or

Time Required

102 Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-07

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 177 178

Sin comentarios

Brocade DCX 8510-8 Backbone Hardware Reference Manual Manual de usuario Pagina 102