Brocade Fabric OS Message Reference (Supporting Fabric OS Manual de usuario descargar pdf (Pagina 30)

8 Fabric OS Message Reference

53-1003140-01

Configuring the syslog message destinations

1

Trap recipient Severity level: 2

SNMPv1:Enabled

Configuring the SNMPv3 trap recipient

To configure the SNMPv3 host to receive the trap, perform the following steps.

1. Log in to the switch as admin.

2. Execute the snmpConfig

--set snmpv3 command to configure the SNMP trap recipient. Ignore

the step to enable the SNMP informs “SNMP Informs Enabled”.

switch:admin> snmpconfig --set snmpv3

SNMP Informs Enabled (true, t, false, f): [false]

SNMPv3 user configuration(snmp user not configured in FOS user database will

have physical AD and admin role as the default):

User (rw): [snmpadmin1]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

User (rw): [snmpadmin2]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

User (rw): [snmpadmin3]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

User (ro): [snmpuser1]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

User (ro): [snmpuser2]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

User (ro): [snmpuser3]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]

Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):

(2..2) [2]

SNMPv3 trap recipient configuration:

Trap Recipient's IP address : [192.0.2.2]

UserIndex: (1..6) [1]

Trap recipient Severity level : (0..5) [1]

Trap recipient Port : (0..65535) [35432]

Trap Recipient's IP address : [192.0.10.10]

UserIndex: (1..6) [2]

Trap recipient Severity level : (0..5) [5]

Trap recipient Port : (0..65535) [162]

Trap Recipient's IP address : [192.0.20.20]

[...]

NOTE

To receive the SNMP traps, the username, the authentication protocol, the UDP port number,

and the privacy protocol must match between the switch and the management station.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Comentarios a estos manuales

Sin comentarios