Brocade FastIron Ethernet Switch IP Multicast Configuratio Manual de usuario descargar pdf (Pagina 112)

Output from the show ip pim bsr command (Continued)TABLE 6

This field... Displays...

RP Indicates the IP address of the Rendezvous Point (RP).

NOTE

This field appears only if this device is a candidate BSR.

group prefixes Indicates the multicast groups for which the RP listed by the previous field is a

candidate RP.

NOTE

This field appears only if this device is a candidate BSR.

Candidate-RP-

advertisement period

Indicates how frequently the BSR sends candidate RP advertisement messages.

NOTE

This field appears only if this device is a candidate BSR.

Displaying candidate RP information

To display candidate RP information, enter the following command at any CLI level.

device# show ip pim rp-candidate

Next Candidate-RP-advertisement in 00:00:10

RP: 207.95.7.1

group prefixes:

224.0.0.0 / 4

Candidate-RP-advertisement period: 60

This example show information displayed on a device that is a candidate RP. The next example shows

the message displayed on a device that is not a candidate RP.

device# show ip pim rp-candidate

This system is not a Candidate-RP.

Syntax: show ip pim [vrf vrf-name ] rp-candidate

This command displays candidate RP information for the VRF instance identified by the vrf-name

variable.

The following table describes the output from this command.

Displaying candidate RP information

110 FastIron Ethernet Switch IP Multicast Configuration Guide

53-1003085-02

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 229 230

Sin comentarios

Brocade FastIron Ethernet Switch IP Multicast Configuratio Manual de usuario Pagina 112