Brocade Mobility RFS Controller CLI Reference Guide (Suppo Manual de usuario Pagina 69
- Pagina / 135
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Mobility RFS Controller CLI Reference Guide 51
53-1003098-01
2
join-cluster <IP> user <USERNAME> password <WORD> {level [1|2]|mode
[active|standby]}
Usage Guidelines:
To add a device to an existing cluster:
• Configure a static IP address on the device (access point, wireless controller, or service
platform).
• Provide username and password for superuser, network admin, system admin, or operator
accounts.
After adding the device to a cluster, execute the “write memory” command to ensure the
configuration persists across reboots.
Example
rfs7000-37FABE#join-cluster 172.16.10.10 user admin password admin123
Joining cluster at 172.16.10.10... Done
Please execute “write memory” to save cluster configuration.
rfs7000-37FABE#
nx6500-31FABE#join-cluster 172.16.10.10 user admin password admin123
Joining cluster at 172.16.10.10... Done
Please execute “write memory” to save cluster configuration.
nx6500-31FABE#
Related Commands:
l2tpv3
User Exec Commands
Establishes or brings down an Layer 2 Tunnel Protocol Version 3 (L2TPV3) tunnel
Supported in the following platforms:
join-cluster Adds a access point, wireless controller, or service platform to an existing cluster
<IP> Specify the cluster member’s IP address.
user <USERNAME> Specify a user account with super user privileges on the new cluster member
password <WORD> Specify password for the account specified in the user parameter
level [1|2] Optional. Configures the routing level
• 1 – Configures level 1 routing
• 2 – Configures level 2 routing
mode [active|standby] Optional. Configures the cluster mode
• active – Configures this cluster as active
• standby – Configures this cluster to be on standby mode
cluster Initiates cluster context. The cluster context enables centralized management and configuration of all cluster
members from any one member.
create-cluster Creates a new cluster on a specified device
- Brocade Mobility RFS 1
- Controller 1
- Document History 2
- Contents 3
- Chapter 5 COMMON COMMANDS 6
- Chapter 6 SHOW COMMANDS 6
- Chapter 7 PROFILES 7
- Chapter 8 AAA-POLICY 9
- Chapter 12 ACCESS-LIST 10
- Chapter 14 FIREWALL-POLICY 10
- Chapter 15 MINT-POLICY 11
- Chapter 16 MANAGEMENT-POLICY 11
- Chapter 17 RADIUS-POLICY 11
- Chapter 18 RADIO-QOS-POLICY 12
- Chapter 19 ROLE-POLICY 12
- Chapter 20 SMART-RF-POLICY 12
- Chapter 21 WIPS-POLICY 12
- Chapter 22 WLAN-QOS-POLICY 12
- Chapter 23 L2TPV3-POLICY 13
- Chapter 28 PASSPOINT POLICY 14
- Chapter 25 ROUTING-POLICY 14
- Chapter 26 AAA-TACACS-POLICY 14
- Chapter 27 MESHPOINT 14
- Chapter 29 FIREWALL LOGGING 15
- About This Guide 16
- Understanding command syntax 17
- Related publications 18
- Getting technical help 19
- INTRODUCTION 20
- CLI Overview 21
- Command Description 24
- Using the No Command 26
- TABLE 2 Keystrokes Details 27
- Command Output pagination 28
- Creating Profiles 28
- Viewing Configured APs 29
- Remote Administration 30
- Configuring SSH 31
- User Name admin 32
- USER EXEC MODE COMMANDS 33
- User Exec Commands 34
- 03/01/2013-12:30 36
- 68.11.E6.C4 ? 46
- {upgrade-time <TIME> 60
- That took 0.00 seconds 81
- • TEAM-CMT 83
- PRIVILEGED EXEC MODE COMMANDS 92
- Privileged Exec Mode Commands 93
- Example 100
- Enter old password: 101
- 2013-02-15 14:45:43 UTC 110
- Password: 112
- ... creating cluster 114
- {from-controller 130
- 130
- {upgrade-time 131
- --- startup-config 133
- - radio-count 0 133
- use rf-domain default 133
- Directory of flash:/ 134
- Entering character mode 156
- Error: No upgrade in progress 160
- GLOBAL CONFIGURATION COMMANDS 171
- Global Configuration Commands 173
- Global Config Commands 174
- 172.16.10.13 port 1 197
- 60 exact ascii MSFT\5.0 223
- 238
- use profile default-rfs4000 265
- $kerberos proto 307
- $TestVLANAlias 10 307
- TestDevice 315
- Wireless LAN Mode commands: 333
- Defines the WLAN description 349
- Configures a WLAN QoS policy 385
- COMMON COMMANDS 400
- Parameters (User Exec Mode) 413
- Syntax: (Global Config Mode) 434
- System Information: 438
- SHOW COMMANDS 441
- TABLE 4 Show Commands 442
- 2013-02-15 15:28:26 UTC 445
- PRIVILEGE EXEC Mode 445
- Terminal Type: xterm 446
- USER EXEC Mode 446
- SysAuthControl is disabled 470
- File Systems: 477
- Serial Number : 9184521800027 497
- Logging module: enabled 500
- AAA-Policy is none 503
- PPPoE Client Configuration: 508
- No reload is scheduled 509
- <PROFILE-NAME>} 513
- <PROFILE-NAME> 515
- hostname rfs7000-37FABE 516
- No changes in this session 517
- <WORD> 539
- AP: 00-23-68-11-E6-C4 543
- >>> WWAN Status: 547
- PROFILES 552
- • Profile Config Commands 553
- • Device Config Commands 553
- Profile Config Commands 555
- Profile-Config Commands 556
- bridge vlan 1 558
- ‘$kerberos’ settings 562
- RFS4000-bridge-vlan-1)#commit 584
- crypto ikev1 peer peer1 617
- Remote VPN client: 632
- dscp-mapping 20 priority 7 649
- • all – Shuts down all radios 653
- • radio1 – Shuts down radio 1 653
- • radio2 – Shuts down radio 2 653
- interface ge1 677
- SVI configuration commands: 688
- interface vlan8 695
- • in – Sets incoming packets 697
- Radio Mode commands: 698
- • 1 – Channel 1 in 20 MHz 709
- • 2 – Channel 1 in 20 MHz 709
- interface radio1 714
- 172.16.10.1 port 3 716
- Mobility 1240 Access Point 737
- TechPubs 747
- TechPubsTesting@123 752
- TechPubsUser1 753
- Tinterface-config-vm-instance 756
- Nat Policy Mode commands: 763
- ip nat pool pool1 764
- Point)#meshpoint-device test 783
- Point-meshpoint-test)# 783
- Point-meshpoint-test)#? 783
- mint link ip 1.2.3.4 789
- ParametersProfiles Mode 806
- Parameters Device Mode 807
- • Responds to ARP requests 808
- Device Config Commands 816
- use rf-domain default 826
- 172.16.10.7 841
- AAA-POLICY 844
- AAA-Policy-Config Commands 845
- AUTO-PROVISIONING-POLICY 865
- ADVANCED-WIPS-POLICY 885
- ASSOCIATION-ACL-POLICY 897
- ACCESS-LIST 903
- Example 1: 913
- $foo any rule-precedence 10 913
- $foobar eq ftp 913
- $kerberos 10.60.20.0/24 913
- $Tandem 10.60.20.0/24 914
- 8021p 3 rule-precedence 600 939
- DHCP-SERVER-POLICY 940
- dhcp-pool testPool 950
- 192.168.13.9 952
- 192.168.13.8 192.168.13.9 953
- 192.168.13.19 954
- 192.168.13.25 192.168.13.28 956
- 192.168.13.25 958
- 192.168.13.26 961
- 157.235.208.80 966
- 192.168.13.0/ 968
- 172.16.10.9 977
- 172.16.10.24 980
- 10.0.0.0/10 157.235.208.235 984
- FIREWALL-POLICY 989
- 53-1003098-01 1000
- Related Commands: 1003
- Parameters 1007
- MINT-POLICY 1018
- (config-if) instance 1019
- Command Description Reference 1019
- MANAGEMENT-POLICY 1024
- Management Mode commands: 1025
- Usage Guidelines: 1027
- 172.16.10.4 log denied-only 1038
- Management Mode mode: 1046
- RADIUS-POLICY 1048
- • access details 1053
- • user roles 1053
- • policy’s start and end time 1053
- Mobility RFS7000 1065
- RADIO-QOS-POLICY 1079
- ROLE-POLICY 1095
- TestClientIdentity 1112
- MotorolaSolutions 1113
- user-role user1 precedence 1 1118
- user-role test precedence 1 1122
- 11-22-33-44-55-66 1123
- SMART-RF-POLICY 1133
- 2.4Ghz 3 1151
- WIPS-POLICY 1153
- br-detection-ageout 50 1167
- signature test 1176
- PS signature 1177
- WLAN-QOS-POLICY 1181
- L2TPV3-POLICY 1197
- • l2tpv3-policy-commands 1198
- • l2tpv3-tunnel-commands 1198
- ROUTER-MODE COMMANDS 1231
- OSPF-area-mode 1234
- 172.16.10.0/24 1237
- router ospf 1240
- 172.16.10.8 1246
- ROUTING-POLICY 1249
- Route Map Mode commands: 1253
- route-map 1 1255
- AAA-TACACS-POLICY 1263
- MESHPOINT 1273
- Meshpoint-Config commands 1274
- Mesh Point QoS Mode commands: 1292
- meshpoint-device test 1305
- PASSPOINT POLICY 1313
- FIREWALL LOGGING 1335
- FTP data connection log 1336
- UDP packets log 1337
- ICMP type logs 1337
- Raw IP Protocol logs 1339
- Firewall startup log 1340
- Manual time change log 1341
- Firewall ruleset log 1342
- TCP Reset Packets log 1344
- ICMP Destination log 1344
- ICMP Packet log 1344
- SSH connection log 1344
- Allowed/Dropped Packets Log 1345
- Assumptions 1347
- • Bits per second:19200 1348
- • Data Bit: 8 1348
- • Parity: None 1348
- • Stop Bit: 1 1348
- • Flow Control: None 1348
- Creating a RF Domain 1349
- Creating an AP Profile 1351
- Creating a DHCP Server Policy 1354
- • SSID: WLAN_USECASE_01 1355
- • Mode: Infrastructure 1355
Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility RFS Controller CLI Reference Guide (Suppo
Accesorios De Computador Brocade Mobility RFS4000 Controller Installation Guide (Su Manual de usuario
(42 paginas)
(42 paginas)
Accesorios De Computador Brocade Mobility 7131 Installation Guide - Dependent Mode Manual de usuario
(52 paginas)
(52 paginas)
Accesorios De Computador Brocade Mobility RFS Controller System Reference Guide (Su Manual de usuario
(101 paginas)
(101 paginas)
Accesorios De Computador Brocade Mobility 7131N-FGR Access Point Installation Guide Manual de usuario
(65 paginas)
(65 paginas)
Accesorios De Computador Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario
(607 paginas)
(607 paginas)
Accesorios De Computador Brocade Mobility 5181 Access Point Product Reference Guide Manual de usuario
(428 paginas)
(428 paginas)
Accesorios De Computador Brocade Mobility 1240 Access Point Installation Guide Manual de usuario
(68 paginas)
(68 paginas)
Accesorios De Computador Brocade Mobility 7131N-FGR Access Point Product Reference Manual de usuario
(593 paginas)
(593 paginas)
Accesorios De Computador Brocade Mobility 7131 Access Point Product Reference Guide Manual de usuario
(520 paginas)
(520 paginas)
Accesorios De Computador Brocade Mobility 1220 Access Point Installation Guide Manual de usuario
(63 paginas)
(63 paginas)
Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario
(854 paginas)
(854 paginas)
Accesorios De Computador Brocade Enterprise Wireless LAN Antenna Specification Guid Manual de usuario
(158 paginas)
(158 paginas)
Accesorios De Computador Brocade Virtual ADX Switch and Router Guide (Supporting AD Manual de usuario
(374 paginas)
(374 paginas)
Accesorios De Computador Brocade Virtual ADX Security Guide (Supporting ADX v03.1.0 Manual de usuario
(180 paginas)
(180 paginas)
Accesorios De Computador Brocade Virtual ADX OpenScript Programmer’s Guide (Support Manual de usuario
(30 paginas)
(30 paginas)
Accesorios De Computador Brocade Virtual ADX OpenScript API Guide (Supporting ADX v Manual de usuario
(132 paginas)
(132 paginas)
Accesorios De Computador Brocade Virtual ADX Server Load Balancing Guide (Supportin Manual de usuario
(408 paginas)
(408 paginas)
Accesorios De Computador Brocade Virtual ADX XML API Programmer’s Guide (Supporting Manual de usuario
(878 paginas)
(878 paginas)
Panasonic UF-885 manuály
Uživatelské manuály a uživatelské příručky pro Faxy Panasonic UF-885.
Poskytujeme 1 manuály pdf Panasonic UF-885 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Panasonic UF-885 Uživatelský manuál (194 strany)
Značka: Panasonic | Kategorie: Faxes | Velikost: 4.57 MB |
Tabulka s obsahem
APPENDIX
7
Introduction
11
Function Key
12
RESOLUTION
15
SUB-ADDR
15
INCORRECT
42
Program Keys
73
Access Code
87
Fax Forward
96
Department Code
101
FUNCTION
107
Multiple LOGO
110
(Note 5)
121
Sub-addressing
142
Troubleshooting
157
Specifications
171
Avertissement
181
Glossary
182
UIDE UF-885/895
193
DZSD000793-1
194
Další produkty a příručky pro Faxy Panasonic
| Modely | Typ Dokumentu |
|---|---|
| KX-FPG371 |
Uživatelský manuál
Panasonic KX-FPG371 User Manual,
132 stránky
|
| UF-5100 |
Uživatelský manuál
Panasonic UF-5100 User Manual,
156 stránky
|
| DP-C401 |
Uživatelský manuál
Panasonic DP-C401 User Manual,
22 stránky
|
| KX-FLM651 |
Uživatelský manuál
Panasonic KX-FLM651 User Manual,
90 stránky
|
| 8045 |
Uživatelský manuál
Panasonic 8045 User Manual,
196 stránky
|
| UF-890/990 |
Uživatelský manuál
Panasonic UF-890/990 User Manual,
170 stránky
|
| KX-FC231NZ |
Uživatelský manuál
Panasonic KX-FC231NZ User Manual,
114 stránky
|
| KX-PW603DL |
Uživatelský manuál
Panasonic KX-PW603DL User Manual,
20 stránky
|
| KX-FLB753HK |
Uživatelský manuál
Panasonic KX-FLB753HK User Manual,
90 stránky
|
| KX-FHD301 |
Uživatelský manuál
Panasonic KX-FHD301 User Manual,
76 stránky
|
| UF-4100 |
Uživatelský manuál
Panasonic UF-4100 User Manual,
122 stránky
|
| KX-PW503DL |
Uživatelský manuál
Panasonic KX-PW503DL User Manual,
20 stránky
|
| PANAFAX UF-333 |
Uživatelský manuál
Panasonic PANAFAX UF-333 User Manual,
148 stránky
|
| KX-PW55CL |
Uživatelský manuál
Panasonic KX-PW55CL User Manual,
24 stránky
|
| KX-PW30CL |
Uživatelský manuál
Panasonic KX-PW30CL User Manual,
12 stránky
|
| KX-FPC141 |
Uživatelský manuál
Panasonic KX-FPC141 User Manual,
156 stránky
|
| KX-FL513HK |
Uživatelský manuál
Panasonic KX-FL513HK User Manual,
2 stránky
|
| KX-PW508DW |
Uživatelský manuál
Panasonic KX-PW508DW User Manual,
20 stránky
|
| KX-FHD351 |
Uživatelský manuál
Panasonic KX-FHD351 User Manual,
104 stránky
|
| KX-FP86 |
Uživatelský manuál
Panasonic KX-FP86 User Manual,
88 stránky
|
© 2020, manymanuals.es. Todos los derechos reservados | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales