Brocade Network OS Software Licensing Guide v4.1.0 Manual de usuario descargar pdf (Pagina 26)

NOTE

After adding an FCoE or DPOD license, you must disable and re-enable all affected ports. The

VCS Fabric license does not require re-enabling.

You can disable and then enable each affected port, or you can enter the chassis disable

command followed by the chassis enable command to re-enable the entire chassis.

switch# chassis disable

switch# chassis enable

3. If the license does not appear in the show license command output, then it was not installed. In

privileged EXEC mode, enter the license add lictstr command to install the license. For FCoE

and DPOD licenses, you must also disable and enable the switch or port.

switch# license add licstr "*B

slSETgzTgeVGUDeQR4WIfRx7mmXODdSwENoRGEnAmX3Ca3uHeZgXK0b,jzxyzfzKLrMsPN8ClSxvDQRRT

8VyuULyyKTO0ryU6qm4s1jjiSAeV,COoedzCx1v6ycQgnYMeSVp#"

License Added [*B

slSETgzTgeVGUDeQR4WIfRx7mmXODdSwENoRGEnAmX3Ca3uHeZgXK0b,jzxyzfzKLrMsPN8ClSxvDQRRT

8VyuULyyKTO0ryU6qm4s1jjiSAeV,COoedzCx1v6ycQgnYMeSVp# ]

For license change to take effect, please disable/enable port or switch...

switch# chassis disable

switch# chassis enable

Licensing Tasks

24 Network OS Software Licensing Guide

53-1003164-01

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Brocade Network OS Software Licensing Guide v4.1.0 Manual de usuario Pagina 26