Brocade Web Tools Administrators Guide (Supporting Fabric Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 274
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
1. Click Configure > Switch Admin.
The Switch Administration window displays in basic mode, as shown in Figure 7 on page 52. The
basic mode displays the "basic" tabs and options.
2. Click Show Advanced Mode to see all the available tabs and options, as shown in the following
figure.
FIGURE 8 Switch Administration window, Switch tab, Advanced mode
Configuring IP and subnet mask information
Before proceeding, collect all the information you need to configure the Ethernet IP interface. This
includes the subnet mask, gateway IP address, or IPFC, and subnet mask for your system. When you
configure or change the Ethernet IP, subnet mask, gateway IP, or IPFC, and subnet mask from Web
Tools, there is a normal loss of network connection to the switch. Close all current windows and restart
Web Tools with the new IP address.
NOTE
The IPFC address is specific for each logical switch. The IPFC address is set to FC0 for switches that
do not support Virtual Fabrics.
Configuring IP and subnet mask information
Web Tools Administrator's Guide 53
53-1003169-01
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 273 274

Comentarios a estos manuales

Sin comentarios