Brocade Network Advisor SAN + IP User Manual v12.1.0 Manual de usuario Pagina 198
- Pagina / 238
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Network Advisor SAN + IP User Manual 131
53-1002949-01
Host discovery
4
Deleting IP devices from discovery
To delete one or more IP devices from discovery, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Select the IP devices you want to remove from discovery in the Discovered Products table.
Select multiple devices by holding down the CTRL key and clicking more than one device.
NOTE
You cannot delete an active member from a VCS fabric.
3. Click Delete.
Host discovery
The Management application enables you to discover individual hosts, import a group of Host from
a comma separated values (CSV) file, or import all hosts from discovered fabrics or VM managers.
NOTE
Host discovery requires HCM Agent 2.0 or later.
NOTE
SMI and WMI discovery are not supported.
Discovering Hosts by Network address or host name
To discover a Host by Network address or host name, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
- Brocade Network Advisor 1
- Document History 2
- Contents 3
- Chapter 2 Licenses 4
- Chapter 3 Patches 4
- Chapter 4 Discovery 4
- Chapter 5 Management Groups 7
- 53-1002949-01 10
- Chapter 9 View Management 12
- Chapter 10 MRP Topology 14
- Chapter 11 Call Home 14
- Chapter 12 Third-party tools 15
- Chapter 15 Host Port Mapping 18
- Chapter 18 VCS Management 19
- Chapter 19 Host Management 20
- Chapter 21 Telemetry 22
- Chapter 24 Virtual Fabrics 24
- Chapter 26 Zoning 28
- Chapter 28 Fabric Binding 32
- Chapter 29 Port Fencing 32
- Chapter 30 FICON Environments 33
- Chapter 31 IP Element Manager 33
- Chapter 36 VLAN Management 36
- Chapter 37 MPLS Management 36
- Chapter 38 VIP Servers 38
- Chapter 41 Deployment Manager 39
- Chapter 43 Performance Data 40
- Chapter 44 Flow Vision 42
- Chapter 45 Frame Monitor 43
- Chapter 46 Power Center 43
- Chapter 47 Policy Monitor 44
- Chapter 48 Fault Management 45
- Chapter 51 Technical Support 48
- Chapter 52 Reports 48
- Appendix A Application menus 49
- Appendix C Event Categories 50
- Appendix D User Privileges 50
- Appendix E Device Properties 50
- Appendix G CLI Templates 50
- Chapter H Troubleshooting 51
- Appendix I Database Fields 51
- About This Document 54
- What’s new in this document 64
- Document conventions 66
- Notice to the reader 67
- Additional information 67
- Getting technical help 68
- Document feedback 69
- Getting Started 70
- FIGURE 1 Main window 71
- Management server and client 72
- Launching a remote client 73
- Viewing active sessions 78
- Disconnecting users 79
- Viewing server properties 79
- Viewing port status 80
- Server and client ports 82
- Keyboard shortcuts 85
- Look and feel customization 86
- Entering the license key 102
- TABLE 11 SAN upgrade paths 103
- TABLE 12 IP upgrade paths 103
- License downgrade 105
- Downgrading the edition 106
- Downgrading the package 107
- TABLE 16 MPLS downgrade paths 108
- IP product count downgrade 110
- Installing a patch 111
- Uninstalling a patch 112
- Discovery 114
- SAN discovery overview 115
- FCS policy and seed switches 116
- Discovering fabrics 117
- Attribute Value 119
- Failed — Not Reachable 121
- Configuring SNMP credentials 122
- Rediscovering a fabric 123
- Deleting a fabric 124
- DCB discovery 125
- • New Discovery Pending 126
- • “Deleting a fabric” 127
- Problem Resolution 128
- SAN Fabric monitoring 129
- TABLE 22 Monitor Intervals 130
- SAN Seed switch 133
- Seed switch requirements 134
- Seed switch failover 134
- Changing the seed switch 134
- IP discovery overview 135
- Configuration requirements 137
- Discovery of IPv6 addresses 137
- MIB support 138
- VDX/VCS discovery 141
- Standalone discovery 142
- VCS fabric discovery 142
- VCS fabric rediscovery 143
- VCS fabric split and merge 144
- HyperEdge stack discovery 147
- IP SNMP credentials 150
- Adding SNMPv3 credentials 151
- Editing SNMPv3 credentials 153
- Default IP user credentials 156
- FIGURE 19 Default Passwords 157
- FIGURE 22 Enable Super User 158
- IP Object identifier filters 162
- Excluding product types 163
- FIGURE 24 Preferences tab 164
- IP discovery profiles 168
- FIGURE 25 Profile tab 169
- Configuring address ranges 171
- Adding CIDR subnet addresses 172
- Adding subnet addresses 172
- Adding IP addresses 173
- Excluding subnet addresses 174
- Excluding IP addresses 174
- Editing address ranges 175
- Scheduling discovery 176
- FIGURE 32 Scheduling tab 177
- Editing a discovery schedule 181
- FIGURE 39 Preferences tab 183
- Deleting a discovery profile 184
- Starting discovery manually 185
- Stopping discovery 186
- Viewing discovery status 186
- Viewing discovery reports 186
- E-mailing discovery reports 187
- Exporting discovery reports 187
- Viewing the discovery log 188
- FIGURE 41 SNMPv3 credentials 190
- • CBC-DES 191
- • CFB_AES-128 191
- Editing IP device discovery 192
- • HMAC_MD5 193
- • HMAC_SHA 193
- FIGURE 45 SNMPv1/v2c settings 195
- Host discovery 198
- Importing Hosts from a Fabric 202
- Icon Description 207
- VM Manager discovery 208
- Editing a VM manager 210
- • Active 212
- • Failed – Not reachable 212
- IP Rediscovery 213
- Rediscovering a group 215
- Management Groups 216
- Product group overview 217
- Static product groups 218
- Dynamic product groups 220
- Viewing test results 224
- TABLE 28 225
- Port Groups 226
- Creating a port group 227
- Duplicating a port group 228
- Viewing port group properties 229
- Deleting a port group 230
- Application Configuration 231
- Server Data backup 233
- Configuring backup 234
- Enabling backup 236
- Disabling backup 236
- Viewing the backup status 237
- Changing the backup interval 237
- Starting immediate backup 238
- Reviewing backup events 238
- Server Data restore 239
- SAN display settings 240
- Resetting your display 241
- SAN End node display 242
- SAN Ethernet loss events 243
- Event storage settings 244
- Flyover settings 245
- Turning flyovers on or off 248
- Viewing flyovers 248
- Name settings 249
- Fixing duplicate names 250
- Viewing names 251
- Adding a name to a new device 253
- Removing a name from a device 254
- Editing names 254
- Exporting names 254
- Importing Names 255
- Searching for a device by WWN 256
- Configuring the server name 257
- Configuring login security 258
- Syslog Registration settings 259
- Software Configuration 262
- Certificates 263
- Client export port settings 270
- Client/Server IP 271
- • Select All. Go to step 4 272
- IP preferences 275
- • PSH — Push function bit 280
- Configuring SNMP preferences 281
- Memory allocation settings 282
- Small SAN Enterprise 284
- Configuring asset polling 285
- TABLE 34 286
- Configuring SAN communication 287
- Configuring IP communication 288
- FTP/SCP/SFTP server settings 289
- Server port settings 294
- Support mode settings 295
- FIPS Support 297
- Fabric tracking 297
- Enabling fabric tracking 298
- Disabling fabric tracking 298
- User Account Management 302
- Viewing configured users 303
- User accounts 306
- Editing a user account 308
- Copying a user account 308
- Disabling a user account 310
- Enabling a user account 311
- Deleting a user account 311
- Unlocking a user account 311
- Creating a new role 312
- Editing a role 313
- Copying a role 313
- Deleting a role 314
- Adding privileges to a role 314
- Areas of responsibility 315
- Creating an AOR 316
- Editing an AOR 317
- Copying an AOR 317
- Deleting an AOR 318
- Assigning products to an AOR 318
- Removing products from an AOR 319
- Password policies 320
- Loading an AD group 325
- Deleting an AD group 326
- Creating an AD user account 326
- User profiles 328
- Viewing your user profile 329
- Editing your user profile 330
- Changing your password 330
- Viewing your password policy 331
- Resetting optional messages 332
- Configuring CLI credentials 332
- Dashboard Management 334
- FIGURE 95 Dashboard tab 335
- Dashboard toolbar 336
- Dashboard messages 337
- General dashboard functions 338
- Accessing a dashboard 338
- Filtering the dashboards list 339
- Setting the dashboard display 340
- • Type — The type of monitor 341
- Setting the network scope 343
- Default dashboards 346
- Status widgets 347
- Access Point Status widget 348
- Bottlenecked Ports widget 349
- Events widget 350
- Color Severity 351
- Host Adapter Inventory widget 352
- IP Inventory widget 354
- IP Status widget 356
- SAN Inventory widget 358
- SAN Status widget 360
- Status widget 362
- VM Alarms widget 363
- Port Health Violations widget 367
- Performance monitors 369
- Top Port C3 Discards monitor 372
- Top Port CRC Errors monitor 374
- Top Port Discards monitor 376
- Top Port Errors monitor 378
- Top Port Link Resets monitor 381
- Top Port Receive EOF monitor 383
- Top Port Sync Losses monitor 385
- Top Port Traffic monitor 387
- Monitor types 398
- Measures 399
- - Wireless 400
- • Traffic flows 400
- TABLE 39 Port measures types 405
- Common 415
- Wireless 416
- Traffic flow monitor types 417
- Traffic flow measures 417
- View Management 426
- SAN tab overview 427
- SAN main toolbar 428
- View All list 429
- Port Display buttons 430
- Connectivity Map toolbar 430
- Product List 431
- Connectivity Map 432
- Utilization Legend 433
- IP tab overview 434
- IP main toolbar 435
- Product List toolbar 436
- Host Product List toolbar 437
- Topology Map toolbar 437
- Host topology map toolbar 438
- IP Product List 438
- Product List functions 439
- Topology Map 440
- FIGURE 150 SAN Minimap 442
- Resizing the Minimap 443
- Status bar 444
- Icon legend 445
- IP product icons 446
- Host product icons 447
- SAN group icons 447
- Host group icons 448
- IP group icons 448
- SAN port icons 448
- IP port icons 449
- SAN product status icons 449
- IP product status icons 449
- Event icons 450
- Customizing the main window 451
- Exporting the topology 452
- Displaying columns 453
- Changing the order of columns 454
- Resizing the columns 454
- Sorting table information 454
- Copying table information 454
- Exporting table information 455
- Product List customization 456
- Editing a property label 457
- Deleting a property label 457
- Searching for a device 458
- Restricting a search by node 459
- Searching for an exact match 459
- Address Finder 460
- Finding IP addresses 461
- Finding MAC addresses 463
- SAN view management overview 465
- Editing a customized view 467
- Deleting a customized view 468
- Copying a view 468
- SAN topology layout 470
- Changing the product label 473
- Changing the port label 473
- Grouping on the topology 474
- Expanding groups 475
- Viewing connections 475
- IP topology view manager 476
- Network Objects view 477
- Network Object view functions 478
- IP Topology view 479
- L2 Topology view 479
- Ethernet Fabrics view 480
- VLAN Topology view 481
- Generating an STP/RSTP Report 482
- Exporting an STP/RSTP Report 483
- E-mailing an STP/RSTP Report 483
- Host Topology view 484
- IP topology map components 485
- Topology map elements 486
- TABLE 54 Legend components 487
- Topology map layout 488
- Orthogonal 489
- Orthogonal (Merge Lines) 490
- Hierarchical 490
- Circular 491
- Free Form 491
- Creating a customized layout 492
- Customizing the Topology Map 494
- Printing a map 497
- Port actions 498
- Disabling port actions 499
- MRP Topology 501
- Viewing a MRP Topology map 502
- Viewing a MRP ring 503
- TABLE 56 504
- • Fast Organic 506
- • Organic 507
- • Hierarchical 507
- • Self Organizing 508
- • Circular 508
- Refreshing MRP Topology data 511
- Viewing MRP properties 511
- Call Home 513
- overview 514
- System requirements 515
- Showing a Call Home center 518
- Hiding a Call Home center 518
- Editing a Call Home center 519
- Enabling a Call Home center 526
- Enabling supportSave 526
- Disabling a Call Home center 527
- Viewing Call Home status 528
- Defining an event filter 530
- Third-party tools 534
- Launching a Telnet session 535
- Launching an Element Manager 536
- Launching Web Tools 537
- Launching FCR configuration 538
- Launching Name Server 539
- Launching HCM Agent 539
- Launching Fabric Watch 540
- Adding a tool 540
- • Fabric and switch details 546
- Registering a SCOM server 547
- Editing a SCOM server 548
- Removing a SCOM server 548
- Server Management Console 549
- Services tab 550
- Refreshing the server status 551
- Stopping all services 551
- Stopping the CIMOM services 551
- Starting all services 552
- Restarting all services 552
- Ports tab 553
- AAA Settings tab 554
- FIGURE 180 AAA Settings tab 555
- Configuring a Radius server 556
- Configuring an LDAP server 559
- Configuring a TACACS+ server 562
- • Local Database 565
- Restore tab 567
- FIGURE 187 Restore tab 568
- HCM Upgrade tab 570
- SMI Agent Configuration Tool 570
- FIGURE 190 Log In dialog box 571
- SLP on UNIX systems 576
- SLP on Windows systems 576
- Home tab 577
- Authentication tab 578
- FIGURE 192 Authentication tab 579
- CIMOM tab 581
- Configuring the CIMOM log 583
- Certificate Management tab 584
- Viewing a certificate 585
- Exporting a certificate 585
- Summary tab 586
- FIGURE 195 Summary tab 587
- TABLE 58 587
- SAN Device Configuration 589
- Exporting a configuration 597
- Importing a configuration 598
- Replicating configurations 599
- Step 3. Source Location 600
- Step 4. Source Configuration 600
- Step 5. Destination Switches 601
- TABLE 63 Step 6. Validation 602
- TABLE 64 Step 7. Summary 602
- Enhanced group management 605
- Firmware management 606
- FIGURE 202 Firmware download 607
- Importing a firmware file 610
- Deleting a firmware file 611
- Frame viewer 612
- Viewing port connectivity 615
- Enabling a port 619
- Disabling a port 619
- Filtering port connectivity 619
- Viewing port details 620
- Viewing ports 621
- Port types 622
- Showing connected ports 622
- • Connection properties 623
- Determining port status 626
- Viewing port optics 627
- Port commissioning overview 629
- Registering a CIMOM server 631
- Example 632
- Decommissioning an F-Port 635
- Recommissioning an F-Port 635
- Decommissioning an E-Port 636
- Recommissioning an E-Port 636
- AD-enabled fabric discovery 640
- Feature AD context 641
- Port Auto Disable 643
- Unblocking ports 649
- Host Port Mapping 650
- Creating a new Host 651
- Renaming an HBA Host 652
- Deleting an HBA Host 652
- Viewing Host properties 652
- Importing HBA-to-Host mapping 653
- • Checks for duplicate HBAs 654
- Removing an HBA from a Host 655
- Exporting Host port mapping 655
- • \root (Linux) 656
- Storage Port Mapping 657
- Creating a storage array 658
- Deleting a storage array 660
- TABLE 74 Import Results 662
- Wireless Management 664
- Wireless devices 665
- Wireless device discovery 665
- View management 667
- Wireless device properties 667
- Element Manager 667
- Launching the Element Manager 668
- CLI configuration management 670
- Cluster mode 671
- VLAN management 671
- Performance management 672
- Policy Monitors 672
- Fault management 672
- AP Products report 673
- Detailed AP Products report 674
- VCS Management 675
- VCS mode types 676
- Network OS 681
- VCS product groups 682
- Port profiles 683
- Life of a port profile 684
- AMPP events and behavior 684
- Comparing port profiles 688
- Deploying port profiles 690
- FRU monitoring 692
- System thresholds 692
- Alert notifications 692
- Resource monitoring 693
- SFP parameter monitoring 693
- Security monitoring 694
- Port statistics monitoring 694
- Interface error types 694
- Ethernet fabric traceroute 695
- Ethernet_Fabric 697
- Exporting diagnostic data 698
- Host Management 699
- Brocade adapters 700
- Converged Network Adapters 701
- Fabric Adapters 701
- HCM software 702
- HCM features 703
- Host adapter discovery 704
- VM Manager 704
- Editing a VM Manager 705
- Deleting a VM Manager 705
- ESXi CIM listener ports 705
- Connectivity map 707
- Adapter software 707
- Driver repository 709
- Boot image repository 710
- Bulk port configuration 712
- Adding a port configuration 714
- Editing a port configuration 716
- Deleting a port configuration 716
- FAWWNs on attached AG ports 720
- Deleting AG port FAWWNs 721
- Role-based access control 722
- Host performance management 723
- Host security authentication 724
- Host fault management 726
- Filtering event notifications 727
- Backup support 728
- Fibre Channel over Ethernet 730
- Enhanced Ethernet features 731
- FCoE protocols supported 732
- FCoE licensing 733
- Saving running configurations 733
- DCB configuration management 735
- Switch policies 736
- DCB configuration 737
- Configuring LLDP 739
- Adding a LAG 742
- FIGURE 242 Add LAG dialog box 743
- Editing a DCB switch 744
- Editing a DCB port 746
- Editing a LAG 747
- Enabling a DCB port or LAG 749
- QoS configuration 750
- Priority-based flow control 751
- Creating a DCB map 751
- Editing a DCB map 753
- Deleting a DCB map 753
- Creating a Traffic Class map 755
- Editing a Traffic Class map 755
- Deleting a Traffic Class map 756
- FCoE provisioning 757
- VLAN classifier configuration 759
- • ARP — 0x0808 760
- • IP — 0x8881 760
- • IPv6 — 0x86DD 760
- LLDP-DCBX configuration 763
- Adding an LLDP profile 764
- Editing an LLDP profile 765
- Deleting an LLDP profile 765
- 802.1x authentication 767
- FIGURE 250 802.1x dialog box 768
- Deploy to Products dialog box 770
- Deploy to Ports dialog box 770
- Supported VCS platforms 774
- Viewing switches in VCS mode 775
- Viewing ports in VCS mode 778
- QoS - Non-DCB 780
- Viewing LAGs in VCS mode 782
- DCB performance 786
- Historical performance graph 788
- Historical performance report 788
- FCoE login groups 789
- Adding an FCoE login group 790
- Editing an FCoE login group 791
- • “FCoE login groups” 792
- Viewing virtual FCoE ports 793
- Clearing a stale entry 795
- Telemetry 796
- Viewing existing PBR policies 797
- Adding a new policy 799
- Adding rules to a policy 799
- • ACL Name — Name of the ACL 800
- Editing a policy 801
- Editing a rule 801
- Deleting a policy or rule 802
- ACL Accounting 807
- Viewing ACL counters 808
- Security Management 809
- Device_Name 810
- • Any — Any of the protocols 812
- Port_Number 815
- Fabric_Name 825
- FIGURE 272 828
- Clearing L3 ACL assignments 843
- Configuring hit statistics 844
- Network configuration 849
- Creating a network 850
- Editing a network 851
- Copying a network 852
- Deleting a network 852
- Network group configuration 853
- Creating a network group 854
- Editing a network group 855
- Copying a network group 856
- Deleting a network group 857
- Service configuration 858
- Creating a service 859
- Editing a service 860
- Copying a service 861
- Deleting a service 861
- Service group configuration 862
- Creating a service group 863
- Editing a service group 864
- Copying a service group 865
- Deleting a service group 866
- • Destination MAC address 867
- 869
- Next Steps dialog box 1001
- Protocol 1006
- --initnode command 1013
- --set -keyvault command 1013
- --reg keyvault command 1013
- 3. Click Next 1014
- Error Instructions dialog box 1018
- High availability clusters 1020
- Creating HA clusters 1021
- Failback option 1023
- Invoking failback 1023
- Adding an encryption target 1024
- FIGURE 412 Next Steps screen 1031
- Configuring storage arrays 1039
- Remote replication LUNs 1039
- SRDF pairs 1040
- Moving targets 1044
- Tape LUN statistics 1048
- Encryption engine rebalancing 1052
- Master keys 1053
- Active master key 1054
- Alternate master key 1054
- Master key actions 1055
- ATTENTION 1056
- Creating a new master key 1062
- Security settings 1063
- Setting zeroization 1064
- Redirection zones 1066
- Disk device decommissioning 1066
- Decommissioning disk LUNs 1067
- Displaying Universal IDs 1069
- Setting disk LUN Re-key All 1070
- Thin provisioned LUNs 1074
- Thin Provisioning support 1075
- General tab 1082
- Members tab 1086
- Members tab Remove button 1087
- Security tab 1088
- HA Clusters tab 1090
- Link Keys tab 1092
- Tape Pools tab 1093
- Tape pools overview 1094
- Adding tape pools 1095
- Engine Operations tab 1096
- TABLE 113 Encryption acronyms 1097
- In this chapter 1098
- Zoning overview 1098
- Red Zone 1099
- Green Zone 1099
- Blue Zone 1099
- Online zoning 1100
- Offline zoning 1100
- Zone database size 1101
- Zoning configuration 1102
- Creating a zone 1103
- Viewing zone properties 1103
- Adding members to a zone 1104
- Creating a member in a zone 1105
- Removing a member from a zone 1106
- Renaming a zone 1106
- Deleting a zone 1107
- Duplicating a zone 1107
- Creating a zone alias 1109
- Editing a zone alias 1110
- Exporting zone aliases 1111
- Renaming a zone alias 1112
- Deleting a zone alias 1112
- Duplicating a zone alias 1112
- Creating a zone configuration 1113
- Renaming a zone configuration 1117
- Deleting a zone configuration 1117
- Refreshing a zone database 1120
- Merging fabrics 1120
- Merging two zone databases 1121
- VCS fabric 1125
- Fabric OS fabric 1125
- Configuring LSAN zoning 1126
- Creating an LSAN zone 1127
- LSAN tagging 1130
- Traffic Isolation zones 1131
- Boot LUN zones 1136
- Creating a Boot LUN zone 1137
- Modifying a Boot LUN zone 1137
- Zoning administration 1138
- Listing zone members 1144
- Removing an offline device 1145
- Listing un-zoned members 1145
- Replacing zone members 1146
- Fibre Channel over IP 1148
- FCIP services licensing 1149
- FCIP Concepts 1149
- IP network considerations 1149
- TABLE 115 FCIP capabilities 1150
- FCIP trunking 1151
- Circuit Failover Grouping 1154
- Adaptive Rate Limiting 1156
- Configuring QoS Priorities 1158
- Term Definition 1160
- QOS, DSCP, and VLANs 1161
- DSCP quality of service 1162
- Open systems tape pipelining 1163
- FICON emulation features 1164
- Tape write pipelining 1165
- Tape read pipelining 1165
- Teradata pipelining 1165
- Planning the configuration 1167
- When to enable Fast Write 1170
- Compression mode 1171
- SRDF considerations 1171
- FCIP configuration guidelines 1172
- Configuring an FCIP tunnel 1173
- Adding an FCIP circuit 1176
- Circuit configuration failure 1180
- Enabling Tperf test mode 1182
- Configuring QoS percentages 1182
- Configuring FICON emulation 1184
- Viewing FCIP port properties 1189
- VE/VEx port properties 1190
- (Figure 482) 1190
- GbE port properties 1190
- Editing FCIP circuits 1191
- Disabling FCIP tunnels 1192
- Enabling FCIP tunnels 1192
- Deleting FCIP tunnels 1193
- Disabling FCIP circuits 1193
- Enabling FCIP circuits 1193
- Deleting FCIP Circuits 1193
- (Figure 486) 1197
- Fabric Binding 1199
- Enabling fabric binding 1201
- Disabling fabric binding 1202
- Port Fencing 1207
- Thresholds 1210
- C3 Discard Frames threshold 1211
- Invalid CRCs threshold 1212
- Invalid words threshold 1212
- Link Reset threshold 1212
- Protocol error threshold 1212
- State Change threshold 1212
- Adding thresholds 1213
- Adding a Link Reset threshold 1217
- Assigning thresholds 1221
- Unblocking a port 1222
- Editing thresholds 1223
- Finding assigned thresholds 1227
- Viewing thresholds 1227
- Removing thresholds 1228
- FICON Environments 1230
- Configuring the switch 1233
- • “Enabling Virtual Fabrics” 1236
- Configuring FICON display 1238
- Cascaded FICON fabric 1245
- Enabling DLS 1247
- Cascaded FICON fabric merge 1248
- Resolving merge conflicts 1252
- Port groups 1253
- Viewing port groups 1254
- Editing a port group 1255
- Swapping blades 1256
- IP Element Manager 1258
- Switch properties 1261
- Properties dialog box 1262
- Element Manager toolbar 1263
- Displaying port properties 1264
- Field/Component Description 1265
- Status indicator icons 1267
- Table capabilities 1268
- Performance data 1268
- Configure VLAN dialog box 1269
- Web Management interface 1270
- TABLE 127 Troubleshooting 1271
- Configuration repository 1272
- Viewing the configuration 1277
- FIGURE 526 Compare dialog box 1278
- Restoring a configuration 1279
- • Startup 1280
- • Startup and Reload 1280
- Configuration deviation 1282
- Change tracking 1283
- Configuration snapshots 1284
- FIGURE 530 Compare dialog box 1286
- • Not Applicable 1288
- Schedule backup 1292
- Disabling a backup schedule 1294
- IP Configuration Wizard 1295
- Payloads 1296
- Interface Payloads: 1297
- Payload name Description 1297
- • Save to Flash 1301
- • Save to Flash and Reload 1301
- CLI Configuration Management 1307
- CLI configuration overview 1307
- Viewing existing templates 1308
- Changing product credentials 1314
- Previewing CLI commands 1316
- CLI command guidelines 1317
- Testing a configuration 1319
- Deleting a configuration 1323
- CLI configuration deployment 1324
- Monitoring configurations 1325
- CLI deployment reports 1332
- CLI configuration scheduling 1333
- Obtaining software files 1336
- Boot image management 1337
- Software image management 1340
- Unified image management 1343
- Updating unified images 1345
- VLAN Management 1348
- Private VLAN 1349
- Remote Switched Port Analyzer 1349
- Displaying a list of VLANs 1350
- VLAN Manager tabs 1351
- Displaying VLANs by products 1353
- Port VLANs 1354
- Assigning DCB ports to a VLAN 1357
- Adding VLAN properties 1358
- Deploying VLAN configurations 1361
- Target context STP type 1363
- Configuring MSTP on a product 1365
- Adding an MSTP instance 1366
- VLAN routing 1367
- MPLS Management 1370
- MPLS licensing 1371
- MPLS overview 1372
- • Setup priority for the LSP 1374
- • Metric for the LSP 1374
- Viewing LSP path information 1375
- Viewing RSVP LSP information 1376
- Adding an LSP admin group 1377
- Editing an LSP admin group 1379
- Deleting an LSP admin group 1380
- Adding an LSP path 1380
- Editing an LSP path 1381
- Duplicating an LSP path 1382
- Deleting an LSP path 1382
- FIGURE 580 Bypass LSP 1389
- Editing an RSVP LSP 1390
- Duplicating an RSVP LSP 1390
- Deleting an RSVP LSP 1390
- Displaying LSP Topologies 1392
- LSP Topology View Options 1393
- MPLS Domain 1394
- VLL manager 1395
- Viewing VLL instances 1396
- Editing a VLL instance 1407
- Deleting VLL instances 1407
- VPLS Manager 1411
- Configuring endpoint settings 1417
- Editing a VPLS instance 1422
- Deleting a VPLS instance 1422
- VCID pools 1424
- Editing a MEP 1433
- Sending a loopback message 1438
- Sending a linktrace message 1439
- Configuring frame delay 1441
- VIP Servers 1443
- Server port statistics 1447
- Global Server Load Balancing 1449
- Viewing the GSLB Manager 1450
- GSLB policy management 1451
- GSLB site management 1457
- GSLB zone configuration 1459
- Adding a host to a zone 1461
- Controller configuration 1463
- • Metric used 1465
- Scheduling a deployment 1466
- SSL certificates 1469
- SSL certificate configuration 1470
- Creating key passwords 1483
- Appending SSL certificates 1484
- Chaining SSL certificates 1484
- Deleting SSL certificates 1486
- Deployment Manager 1487
- Deploying a configuration 1489
- Viewing deployment logs 1489
- FC troubleshooting 1492
- Tracing FC routes 1493
- Adding a detached device 1495
- Port diagnostics requirements 1497
- • Link traffic 1498
- • Latency measurement 1498
- • Measure link distance 1498
- FCIP troubleshooting 1501
- TABLE 140 IP Ping Details 1502
- Tracing IP routes 1503
- TABLE 141 IP Trace Details 1504
- Performance Data 1506
- SAN performance measures 1507
- Example of SNMP v1 1509
- SAN performance overview 1510
- Example of showing FCIP-MIB 1512
- Example of enabling FCIP-MIB 1512
- Example for FC ports 1513
- Example for FCIP tunnels 1513
- Graph display 1516
- Clearing port counters 1517
- • 5 minutes for last 8 days 1520
- Configuring the graph display 1521
- Filtering data by ports 1522
- Filtering data by time 1523
- Performance database views 1524
- SAN end-to-end monitoring 1525
- SAN Top Talker monitoring 1529
- • Occurrences • SID 1531
- • Source • Source Port 1531
- Source Switch/Port • DID 1532
- Destination Switch/Port 1532
- Pausing a Top Talker monitor 1534
- Bottleneck detection 1535
- How bottlenecks are reported 1536
- FIGURE 642 Threshold example 1542
- Assigning a threshold policy 1546
- Deleting a threshold policy 1546
- SAN connection utilization 1547
- • Press CTRL + U 1548
- IP configuration requirements 1551
- Adding measures to products 1555
- Adding measures to ports 1556
- Removing measures from ports 1557
- Configuring graph options 1560
- FIGURE 653 Data points graph 1562
- FIGURE 654 Show events graph 1562
- Exporting a graph 1563
- Printing a graph 1563
- Editing system collectors 1564
- Deleting an expression 1576
- SAN FCIP tunnel display 1578
- Mouse functions for graphs 1581
- MIB data collectors 1582
- IP Custom performance reports 1583
- Up to 2 years 1 day 1585
- IP sFlow configuration 1589
- TABLE 145 Interface Payload 1590
- Creating custom sFlow reports 1593
- 3. Click Add 1604
- Selecting a report 1608
- • Disable a port 1609
- • Enable a port 1609
- Show DNS Name 1610
- Include Remaining Talkers 1610
- Date and time 1610
- Viewing top MAC talkers 1612
- Viewing top VLAN talkers 1612
- ID of the well-known port 1614
- Viewing IPv4 – Others 1618
- Viewing IPv6 Top Talkers 1618
- Valid TCP flags report 1621
- Viewing BGP paths report 1622
- IP traffic accounting 1623
- Flow Vision 1625
- Why Flow Vision exists 1626
- Fabric Vision components 1626
- Flow Vision licensing 1626
- Flow Vision support 1627
- Provisioning flows 1630
- Configuring Basic Options 1632
- Configuring Advanced Options 1635
- Flow definition examples 1637
- Monitoring Flows 1639
- Flows panel right-click menus 1642
- Flow Definitions panel 1642
- Flows panel 1643
- Column Information Displayed 1645
- Using the Performance Graph 1647
- Flow Vision features 1650
- Flow Monitor 1651
- Flow Generator 1652
- Port characteristics 1654
- Flow parameter support 1656
- General flow parameter rules 1658
- Parameter Rules 1659
- Frame Viewer 1661
- Bottleneck Detection 1662
- Trace route and ping 1663
- Port connectivity 1664
- Top Talkers 1665
- End-to-End Monitors 1665
- Frame Monitor 1666
- Pre-defined frame types 1667
- Custom frame types 1667
- Frame Monitoring requirements 1668
- Editing a frame monitor 1670
- Power Center 1673
- Data monitoring 1674
- Viewing PoE data for ports 1675
- Filtering port details 1676
- Viewing PoE charts 1679
- Refreshing PoE data 1682
- PoE power on demand 1683
- Schedule_Name 1692
- PoE thresholds 1694
- Adding a PoE port threshold 1696
- Viewing PoE thresholds 1698
- Updating a PoE threshold 1699
- Enabling PoE thresholds 1700
- Disabling PoE thresholds 1700
- Viewing PoE performance 1701
- • Allocation (W) 1702
- • Allocation % 1702
- • Consumption % 1704
- Policy Monitor 1706
- Fabric policy monitors 1707
- Host policy monitors 1711
- Preconfigured policy monitors 1713
- Viewing policy monitor status 1714
- Adding a policy monitor 1716
- Policy monitor scheduling 1722
- Editing a policy monitor 1723
- Deleting a policy monitor 1724
- Configuration rules 1724
- Adding a configuration rule 1728
- Editing a configuration rule 1731
- Deleting a configuration rule 1732
- Selecting a product 1735
- Predefined conditions 1737
- Adding a configuration block 1740
- Predefined blocks 1743
- Running a policy monitor 1744
- Fault Management 1749
- Event notification 1750
- Defining filters 1752
- SNMP traps 1755
- SNMP trap forwarding 1757
- Adding a trap destination 1758
- Adding a new trap filter 1759
- Event reception 1761
- Adding an SNMP v3 credential 1763
- Trap customization 1766
- - Information about the trap 1767
- SNMP informs 1768
- Adding a syslog recipient 1769
- Removing a syslog recipient 1770
- Syslog forwarding 1771
- Adding a syslog filter 1772
- Event action definitions 1774
- Configuring varbind filters 1777
- Editing event actions 1781
- Special events handling 1784
- Acknowledging special events 1785
- Pseudo events 1790
- Setting pseudo event policies 1791
- Filtering pseudo event traps 1792
- Event custom reports 1801
- Defining report settings 1802
- Defining the report identity 1803
- 4. Click the Filter tab 1806
- Editing a report definition 1809
- Event custom report schedules 1810
- Event logs 1813
- Copying an entire log entry 1814
- Exporting the entire log 1814
- TABLE 170 Event Properties 1816
- Copying the entire Master Log 1817
- Exporting the Master Log 1818
- The ‘unnamed’ filter 1820
- The ‘none’ filter 1820
- Editing a Filter 1820
- Duplicating a Filter 1821
- Deleting a Filter 1821
- Notes on filters 1821
- Packet Capture (Pcap) 1822
- C:\\SNORT\bin\SNORT.exe -c 1823
- Supported hardware 1825
- MAPS license requirements 1825
- Enabling MAPS on a device 1826
- Virtual Fabrics 1826
- High availability 1827
- Admin Domains 1827
- Fabric Watch 1827
- MAPS structural elements 1832
- MAPS monitoring categories 1835
- Measure Description 1836
- Fabric monitoring category 1837
- FRU monitoring category 1838
- Security monitoring category 1838
- Resource monitoring category 1839
- FCIP monitoring category 1839
- TABLE 181 Traffic measures 1840
- MAPS policies 1841
- MAPS rules 1842
- MAPS conditions 1843
- MAPS actions 1844
- SNMP MIB support 1846
- Viewing MAPS policy data 1848
- Configuring a MAPS policy 1850
- Editing a MAPS policy 1853
- Cloning a MAPS policy 1853
- Importing Flow definitions 1854
- Removing imported Flows 1855
- Activating a MAPS policy 1855
- Exporting a MAPS policy 1856
- Importing a MAPS policy 1857
- Deleting a MAPS policy 1857
- Viewing MAPS policy rules 1858
- MAPS groups 1860
- User-defined groups 1861
- Configuring a group 1861
- Editing a group 1863
- Deleting a group 1864
- Fabric/Device_Name 1865
- Creating multiple groups 1866
- Editing multiple groups 1866
- MAPS violations 1868
- MAPS events 1870
- Event field Description 1872
- Dashboard MAPS widgets 1873
- Master Log 1873
- Technical Support 1874
- Device technical support 1878
- Field Description 1884
- Upload failure data capture 1888
- Reports overview 1893
- SAN report types 1893
- Generating SAN reports 1893
- Viewing SAN reports 1894
- Exporting SAN reports 1895
- Printing SAN reports 1895
- Deleting SAN reports 1896
- Generating SAN zoning reports 1898
- Viewing IP reports 1899
- IP report contents 1900
- IP Wired Products report 1901
- Detailed Product Report 1902
- Detailed Cluster Report 1906
- IP Module report 1908
- IP Port VLANs report 1908
- IP Layer 3 VLAN report 1909
- IP Subnet report 1909
- IP Address report 1910
- MAC Address report 1911
- IP Deployment reports 1913
- Preconfigured reports 1914
- User-defined reports 1914
- Viewing a report 1916
- Importing a report template 1917
- Exporting a report template 1917
- Deleting reports 1917
- Report content and functions 1918
- Products List report 1919
- Ports Tx/Rx Ratio report 1924
- Low Traffic Ports report 1926
- Application menus 1928
- SAN main menus 1929
- IP main menus 1939
- SAN shortcut menus 1946
- IP shortcut menus 1961
- Call Home Event Tables 1966
- TABLE 204 # Thermal Events 1967
- TABLE 205 Fabric OS Events 1967
- TABLE 206 IP Call Home Event 1968
- Network OS Call Home Event 1969
- Event Categories 1970
- Product audit events 1971
- Security events 1972
- User action events 1973
- Management server events 1973
- Product events 1974
- User Privileges 1975
- About user privileges 1976
- • Fabric Ports 1980
- • Fabric Summary 1980
- IP privileges and behavior 1987
- • viewing and editing 1993
- • selecting storage 1993
- • initiating manual 1993
- About Roles and Access Levels 1996
- Device Properties 2001
- Viewing SAN device properties 2002
- SAN device properties 2003
- Device properties (Continued) 2003
- Viewing Storage properties 2006
- Viewing port properties 2010
- Port properties (Continued) 2011
- • Real Time Graph 2013
- • HIstorical Graph 2013
- • HIstorical Report 2013
- • IP Ping 2014
- • IP Traceroute 2014
- • IP Performance 2014
- Viewing VC module properties 2015
- IP device properties 2016
- Viewing VCS fabric properties 2020
- Host properties 2028
- Properties customization 2030
- Adding a property field 2031
- Editing a property field 2031
- Deleting a property field 2032
- Regular Expressions 2033
- TABLE 2 Character classes 2034
- TABLE 1 Characters 2034
- TABLE 7 Boundary matches 2035
- TABLE 8 Greedy quantifiers 2036
- TABLE 9 Reluctant quantifiers 2036
- TABLE 11 Logical operators 2036
- TABLE 12 Back references 2037
- CLI Templates 2038
- MCT Cluster Creation 2042
- MCT Cluster Deployment 2042
- MCT Cluster Undeployment 2042
- TABLE 31 MCT Cluster Deletion 2043
- TABLE 32 MCT Client Creation 2043
- TABLE 33 MCT Client Deletion 2043
- MPLS – Endpoint Configuration 2044
- Troubleshooting 2055
- Browser troubleshooting 2056
- FICON troubleshooting 2058
- Launch Client troubleshooting 2060
- Names troubleshooting 2062
- Patch troubleshooting 2063
- Performance troubleshooting 2064
- Port Fencing troubleshooting 2068
- Server troubleshooting 2068
- Supportsave troubleshooting 2070
- View All list troubleshooting 2071
- Wireless troubleshooting 2072
- Zoning troubleshooting 2072
- Database Fields 2074
- TABLE 102 ACH_FILTER 2075
- TABLE 103 ACH_INFO 2075
- TABLE 104 AD_GROUP 2075
- TABLE 108 AOR_DEVICE_MAP 2076
- TABLE 109 AOR_FABRIC_MAP 2076
- • 1 - Text Box 2077
- • 2 - List Box 2077
- • 3 - Radio Button 2077
- Database tables and fields 2078
- BIRTREPORT_RUN_TEMPLATE 2078
- BIRTREPORT_SCHEDULE_CONFIG 2078
- TABLE 118 BOOT_LUN_SEQUENCE 2079
- TABLE 120 CAPABILITY_ 2079
- TABLE 121 CARD 2079
- TABLE 121 CARD (Continued) 2080
- • 0 - 1G 2081
- • 1 - 10G 2081
- • 2 - Dual mode 2081
- • 3 - Failover mode 2081
- TABLE 127 CLIENT_VIEW 2082
- TABLE 129 CLIENT_VIEW_MEMBER 2083
- TABLE 131 CLUSTER 2083
- TABLE 132 CLUSTER_MEMBER 2083
- TABLE 133 CNA_ETH_PORT 2084
- TABLE 135 CNA_ETH_PORT_CONFIG 2084
- TABLE 136 CNA_PORT 2085
- TABLE 137 COLLECTOR 2085
- TABLE 141 CORE_SWITCH 2086
- CORE_SWITCH (Continued) 2087
- TABLE 145 CORE_SWITCH_DETAILS 2088
- • 1 is supported 2089
- • 0 is not supported 2089
- TABLE 146 CRYPTO_HOST 2090
- TABLE 147 CRYPTO_LUN 2091
- CRYPTO_LUN (Continued) 2092
- TABLE 148 CRYPTO_SWITCH 2093
- CRYPTO_TARGET_CONTAINER 2094
- CRYPTO_SWITCH (Continued) 2094
- TABLE 151 DASHBOARD 2095
- TABLE 152 DASHBOARD_CANVAS 2096
- TABLE 154 DASHBOARD_PROVIDER 2096
- TABLE 155 DASHBOARD_WIDGET 2097
- TABLE 157 DEFAULT_FAVORITES 2098
- DEFAULT_WIDGET_PREFERENCE 2099
- DEPLOYMENT_CONFIGURATION 2099
- DEFAULT_FAVORITES (Continued) 2099
- • 1-Presnapshot 2100
- • 2-Postsnapshot 2100
- • 3-Pre & Post snapshot 2100
- TABLE 162 DEPLOYMENT_STATUS 2101
- TABLE 164 DEVICE 2102
- TABLE 164 DEVICE (Continued) 2103
- • 0 indicates not registered 2104
- • 1 indicates registered 2104
- TABLE 165 DEVICE_ENCLOSURE 2108
- TABLE 167 DEVICE_FDMI_DETAILS 2109
- TABLE 168 DEVICE_GROUP 2110
- TABLE 169 DEVICE_GROUP_ENTRY 2111
- TABLE 170 DEVICE_NODE 2111
- TABLE 171 DEVICE_PORT 2112
- TABLE 174 ENCRYPTION_ENGINE 2113
- TABLE 175 ENCRYPTION_GROUP 2114
- ENCRYPTION_GROUP (Continued) 2115
- ENCRYPTION_GROUP_MEMBER 2116
- ENCRYPTION_KMIP_PARAMETERS 2116
- TABLE 179 ETHERNET_CLOUD 2117
- TABLE 180 ETHERNET_INTERFACE 2118
- TABLE 181 ETHERNET_ISL 2118
- TABLE 182 EVENT 2118
- TABLE 183 EVENT_CALL_HOME 2119
- TABLE 182 EVENT (Continued) 2119
- TABLE 184 EVENT_CATEGORY 2120
- TABLE 185 EVENT_DESCRIPTION 2120
- TABLE 186 EVENT_DETAILS 2120
- TABLE 187 EVENT_INSTANCE 2121
- TABLE 189 EVENT_PROCESSOR_MAP 2122
- TABLE 190 EVENT_RULE 2122
- • 0 = Disabled 2123
- • 1 = Enabled 2123
- • 0 = second 2123
- • 1 = Minutes 2123
- • 2 = Hours 2123
- TABLE 191 FABRIC (Continued) 2124
- TABLE 192 FABRIC_CHECKSUM 2125
- TABLE 193 FABRIC_COLLECTION 2125
- TABLE 194 FABRIC_MEMBER 2125
- TABLE 198 FAVORITES 2126
- TABLE 201 FCIP_TUNNEL 2127
- FCIP_TUNNEL (Continued) 2128
- FCIP_TUNNEL_CIRCUIT 2130
- FCIP_TUNNEL_PERFORMANCE 2132
- TABLE 204 FCOE_DEVICE 2133
- TABLE 205 FCR_ROUTE 2134
- TABLE 206 FEATURE 2134
- TABLE 207 FEATURE_EDITION_MAP 2134
- TABLE 208 FEATURES_USAGE 2134
- TABLE 209 FICON_DEVICE_PORT 2134
- FIRMWARE_FILE_DETAIL 2135
- FIRMWARE_SWITCH_DETAIL 2135
- FICON_DEVICE_PORT (Continued) 2135
- TABLE 212 FOUNDRY_DEVICE 2136
- TABLE 213 FOUNDRY_MODULE 2136
- TABLE 216 FPORT_TRUNK_GROUP 2137
- TABLE 217 FPORT_TRUNK_MEMBER 2137
- TABLE 218 FRU 2137
- TABLE 218 FRU (Continued) 2138
- TABLE 219 FTP_SERVER 2139
- TABLE 221 GIGE_PORT 2139
- TABLE 223 GIGE_PORT_STATS 2140
- TABLE 224 GLOBAL_VLAN 2141
- TABLE 226 HA_CLUSTER 2141
- TABLE 227 HBA 2142
- TABLE 227 HBA (Continued) 2143
- • HBA/CNA/AnyIO/Mezzanine 2144
- • 0 - Unknow 2145
- • 1 - Yes 2145
- • 2 - No 2145
- HBA_PORT_DETAIL (Continued) 2146
- HBA_PORT_DEVICE_PORT_MAP 2148
- HBA_PORT_FCOE_DETAILS 2148
- TABLE 233 HBA_REMOTE_PORT 2149
- HBA_REMOTE_PORT (Continued) 2150
- TABLE 235 HBA_TARGET 2151
- HOST_DISCOVERY_OPTION 2152
- HBA_TARGET (Continued) 2152
- TABLE 239 IFL 2153
- TABLE 240 INM_IP_INTERFACE 2153
- TABLE 241 INTERFACE 2154
- TABLE 243 IP_INTERFACE 2155
- TABLE 244 IP_PORT_GROUP 2155
- TABLE 245 IP_ROUTE 2155
- • 0 denotes untrusted 2156
- • 1 denotes trusted 2156
- • 0 denotes present 2157
- TABLE 250 ISL_TRUNK_GROUP 2158
- TABLE 251 ISL_TRUNK_MEMBER 2158
- TABLE 249 ISL_CONNECTION 2158
- TABLE 252 KEY_VAULT 2159
- TABLE 255 L2_NEIGHBOR 2160
- TABLE 256 LAG 2160
- TABLE 257 LAG_MEMBER 2161
- TABLE 256 LAG (Continued) 2161
- TABLE 260 LICENSE 2162
- TABLE 262 LICENSE_FEATURE_MAP 2163
- TABLE 263 LICENSE_RULE 2163
- TABLE 264 LICENSED_FEATURE 2164
- TABLE 265 LINK 2164
- TABLE 266 LOCK 2164
- TABLE 267 LSAN_DEVICE 2164
- TABLE 268 LSAN_TAG_CONFIG 2164
- TABLE 269 LSAN_PROXY_DEVICE 2165
- TABLE 270 LSAN_ZONE 2165
- TABLE 271 LSAN_ZONE_DB_CONFIG 2165
- • Deployed(0) 2166
- • Undeployed(1) 2166
- TABLE 278 MAPS_EVENT 2167
- TABLE 279 MAPS_EVENT_DETAILS 2167
- TABLE 281 MAPS_POLICY 2168
- TABLE 282 MARCHING_ANTS 2168
- TABLE 283 MESSAGE_RECIPIENT 2168
- TABLE 284 MODULE 2169
- TABLE 285 MODULE_SLOT_PRESENT 2169
- TABLE 286 MODULE_TYPE 2169
- TABLE 287 MPLS_ADMIN_GROUP 2170
- TABLE 289 MPLS_LSP 2170
- TABLE 290 MPLS_PATH 2170
- TABLE 291 MPLS_PATH_HOP 2171
- TABLE 292 MPLS_RSVP_LSP 2171
- Field Definition Format Size 2172
- MPLS_RSVP_LSP_PARAMETERS 2173
- TABLE 298 MPLS_RSVP_LSP_PATH 2174
- TABLE 300 MPLS_SERVICE 2174
- MPLS_SERVICE_DEVICE_RELATION 2175
- MPLS_SERVICE (Continued) 2175
- TABLE 304 MRP_RING 2176
- TABLE 305 MRP_RING_DEVICE 2176
- MRP_RING_DEVICE (Continued) 2177
- TABLE 306 N2F_PORT_MAP 2178
- TABLE 307 NETWORK_VLAN 2178
- TABLE 308 NETWORK_SCOPE_TYPE 2178
- TABLE 309 NPORT_WWN_MAP 2178
- TABLE 310 NP_FLOW_DEFINITION 2178
- TABLE 311 NP_SUB_FLOW 2179
- TABLE 313 OUI_VENDOR 2180
- TABLE 314 PHANTOM_PORT 2181
- TABLE 315 PHYSICAL_DEVICE 2181
- TABLE 316 PHYSICAL_INTERFACE 2182
- TABLE 317 PHYSICAL_PORT 2183
- TABLE 321 PM_DASHBOARD_WIDGET 2184
- TABLE 322 PM_DATA_COLLECTOR 2185
- TABLE 323 PM_MEASURE 2186
- TABLE 332 POE_THRESHOLD 2188
- TABLE 333 POE_THRESHOLD_EVENT 2188
- PORT_BOTTLENECK_CONFIG 2189
- PORT_BOTTLENECK_STATUS 2189
- PORT_COMMISSION_CIMOM_SERVER 2189
- TABLE 337 PORT_FENCING_POLICY 2190
- TABLE 339 PORT_PROFILE 2191
- PORT_PROFILE_MAC_MAP 2192
- PORT_PROFILE_QOS_MAP 2192
- PORT_PROFILE_QOS_PFC_MAP 2192
- TABLE 346 PRIVILEGE 2194
- TABLE 347 PRODUCT_APP 2194
- TABLE 348 PROTOCOL_VLAN 2195
- TABLE 349 QRTZ_BLOB_TRIGGERS 2195
- TABLE 350 QRTZ_CALENDARS 2195
- TABLE 351 QRTZ_CRON_TRIGGERS 2195
- TABLE 352 QRTZ_FIRED_TRIGGERS 2195
- TABLE 363 REPORT_TYPE 2198
- TABLE 364 REPORT_TEMPLATE 2198
- • 0= Not Hidden 2199
- • 1= Hidden 2199
- TABLE 371 SAN 2200
- TABLE 372 SAN_CONNECTION 2200
- TABLE 373 SCOM_HOST 2201
- TABLE 374 SECURITY_POLICY 2201
- TABLE 376 SENSOR 2202
- TABLE 377 SFLOW_CHECKPOINT 2203
- TABLE 378 SFLOW_HOUR_SUMMARY 2203
- TABLE 376 SENSOR (Continued) 2203
- • 0 means its edge port 2205
- • 1 means its trill port 2205
- TABLE 382 SFLOW_MINUTE_L3 2206
- • 1 means its fabric port 2207
- TABLE 387 SFLOW_MINUTE_VLAN 2208
- TABLE 391 SFLOW_STAGING 2209
- SFLOW_STAGING (Continued) 2210
- TABLE 392 SFLOW_STAGING_SLNUM 2211
- TABLE 393 SLOT 2211
- TABLE 394 SMART_CARD 2211
- • 1-Pre snapshot 2212
- • 2-Post snapshot 2212
- • device level collector is 0 2213
- TABLE 399 SNMP_DATA_1DAY 2214
- TABLE 400 SNMP_DATA_2HOUR 2214
- TABLE 401 SNMP_DATA_30MIN 2214
- • device - 0 or 2215
- • interface or ports - 1 2215
- TABLE 406 SNMP_EXPRESSION 2216
- TABLE 407 SNMP_PROFILE 2216
- SNMP_PROFILE (Continued) 2217
- TABLE 410 SSL_KEY_PASSWORD 2218
- TABLE 411 STATS_AGING 2218
- TABLE 412 SUB_INTERFACE 2219
- TABLE 413 SUB_PORT_VLAN 2219
- TABLE 416 SWITCH_LICENSE 2220
- TABLE 417 SWITCH_MODEL 2220
- TABLE 418 SWITCH_PORT 2221
- SWITCH_PORT (Continued) 2222
- TABLE 421 SYSTEM_PROPERTY 2225
- TABLE 422 TARGET_TYPE 2226
- TABLE 423 THIRD_PARTY_DEVICE 2226
- TABLE 424 THRESHOLD_MEASURE 2226
- TABLE 425 TIME_SERIES_DATA 2226
- TIME_SERIES_DATA_1DAY 2227
- TIME_SERIES_DATA_2HOUR 2227
- TIME_SERIES_DATA_30MIN 2227
- TIME_SERIES_DATA (Continued) 2227
- TABLE 429 TIME_SERIES_DATA_1 2228
- TIME_SERIES_DATA_1_1DAY 2229
- TIME_SERIES_DATA_1_2HOUR 2229
- TIME_SERIES_DATA_1_30MIN 2230
- TABLE 433 TIME_SERIES_DATA_2 2231
- TIME_SERIES_DATA_2_2HOUR 2232
- TABLE 437 TIME_SERIES_DATA_3 2233
- TIME_SERIES_DATA_3_1DAY 2234
- TIME_SERIES_DATA_3_2HOUR 2234
- TIME_SERIES_DATA_3_30MIN 2235
- TABLE 441 TIME_SERIES_DATA_4 2236
- TIME_SERIES_DATA_4_2HOUR 2237
- TIME_SERIES_DATA_4_30MIN 2237
- TABLE 445 TOOL_APP 2238
- TABLE 446 TOOL_PATH 2238
- TABLE 447 TOPO_MAP_IMAGE 2238
- TABLE 448 TRILL 2239
- TABLE 449 TRILL_TRUNK_GROUP 2239
- TABLE 450 TRILL_TRUNK_MEMBER 2239
- • 0=Disabled 2240
- • 1=Enabled 2240
- TABLE 453 USER_ (Continued) 2241
- TABLE 459 USER_RESOURCE_MAP 2242
- TABLE 460 USER_ROLE_MAP 2242
- TABLE 457 USER_PREFERENCE 2242
- • Loose(0) 2243
- • Strict(1) 2243
- • Disabled(0) 2244
- • Enabled(1) 2244
- • 0? Virtual Server 2245
- • 1 ? Real Server 2245
- VIRTUAL_FCOE_PORT_MAC_MEMBER 2246
- VIRTUAL_FCOE_PORT_STAT 2246
- VIRTUAL_FCOE_PORT (Continued) 2246
- VIRTUAL_FCOE_PORT_STAT_2HR 2247
- VIRTUAL_FCOE_PORT_STAT_30M 2248
- • 1-Enabled 2249
- • 0-disabled 2249
- • 0 is switch mode 2249
- • 2 is ag mode 2249
- VIRTUAL_SWITCH (Continued) 2250
- VIRTUAL_SWITCH_CAPABILITY 2253
- VIRTUAL_SWITCH_CHECKSUM 2253
- VIRTUAL_SWITCH_COLLECTION 2253
- TABLE 484 VLL_DEVICE_RELATION 2255
- TABLE 486 VMOTION_EVENT 2255
- TABLE 488 VM_DATA_CENTER 2256
- TABLE 490 VM_DV_PORT 2257
- TABLE 491 VM_DV_PORT_GROUP 2258
- TABLE 492 VM_DV_SWITCH 2259
- TABLE 494 VM_FC_HBA 2260
- • Fabric 2261
- • Point to point 2261
- • Unknown 2261
- VM_HOST_END_DEV_CONNECTIVITY 2262
- VM_HOST_PROXY_SWITCH 2262
- VM_HOST (Continued) 2262
- TABLE 500 VM_HOST_VIRTUAL_NIC 2263
- TABLE 501 VM_NETWORK_SETTINGS 2264
- TABLE 503 VM_PATH 2265
- TABLE 504 VM_PHYSICAL_NIC 2266
- TABLE 503 VM_PATH (Continued) 2266
- TABLE 505 VM_SECURITY_POLICY 2267
- • VMKernel 2268
- • Service Console 2268
- TABLE 509 VM_STORAGE 2269
- TABLE 512 VM_VCENTER 2270
- TABLE 513 VM_VCENTER_MEMBER 2271
- TABLE 515 VM_VIRTUAL_MACHINE 2273
- VPLS_DEVICE_RELATION 2274
- VPLS_ENDPOINT_RELATION 2274
- TABLE 519 VR_CONN_DOMAIN 2275
- TABLE 522 VR_CONN_MODULE 2276
- TABLE 523 VR_CONN_MODULE_PORT 2276
- TABLE 525 VR_CONN_WWN 2277
- TABLE 526 WT_ARCHIVE 2277
- TABLE 527 ZONE 2277
- TABLE 528 ZONE_ALIAS 2278
- TABLE 529 ZONE_ALIAS_IN_ZONE 2278
- TABLE 530 ZONE_ALIAS_MEMBER 2278
- TABLE 531 ZONE_DB 2278
- TABLE 527 ZONE (Continued) 2278
- TABLE 532 ZONE_DB_CONFIG 2279
- TABLE 533 ZONE_DB_USERS 2279
- TABLE 534 ZONE_IN-ZONE_SET 2279
- TABLE 535 ZONE_MEMBER 2279
- TABLE 531 ZONE_DB (Continued) 2279
- ADAPTER_PORT_CONFIG_INFO 2280
- AG_CONNECTION_INFO 2280
- BOOT_IMAGE_FILE_DETAILS_INFO 2281
- CNA_ETH_PORT_CONFIG_INFO 2281
- CNA_PORT_DETAILS_INFO 2282
- CNA_PORT_INFO 2282
- CORE_SWITCH_DETAILS_INFO 2283
- CRYPTO_HOST_LUN_INFO 2284
- CRYPTO_TARGET_ENGINE_INFO 2285
- DASHBOARD_PREFERENCES_INFO 2285
- DEPLOYMENT_INFO 2286
- DEPLOYMENT_LOG 2286
- DEVICE_CONNECTION_INFO 2287
- EE_MONITOR_STATS_5MIN_INFO 2288
- EE_MONITOR_STATS_30MIN_INFO 2288
- EE_MONITOR_STATS_2HOUR_INFO 2288
- EE_MONITOR_STATS_1DAY_INFO 2289
- TE_PORT_STATS_5MIN_INFO 2289
- TE_PORT_STATS_30MIN_INFO 2289
- TE_PORT_STATS_2HOUR_INFO 2290
- TE_PORT_STATS_1DAY_INFO 2290
- SWITCH_INFO 2291
- DEVICE_INFO 2293
- N2F_PORT_MAP_INFO 2294
- DEVICE_NODE_INFO 2294
- DEVICE_PORT_INFO 2295
- DEV_PORT_GIGE_PORT_LINK_INFO 2296
- DEV_PORT_MAC_ADDR_MAP_INFO 2297
- ISL_CONNECTION_INFO 2297
- ISL_INFO 2298
- ETHERNET_ISL_INFO 2299
- EVENT_DETAILS_INFO 2299
- EVENT_INFO 2300
- FABRIC_INFO 2301
- FCIP_TUNNEL_CIRCUIT_INFO 2302
- FCIP_TUNNEL_INFO 2303
- FCOE_DEVICE_INFO 2304
- FRU_INFO 2305
- GIGE_PORT_ECLOUD_LINK_INFO 2305
- GIGE_PORT_INFO 2306
- HBA_PORT_DETAILS_INFO 2306
- HBA_TARGET_INFO 2308
- HEALTH_STATUS_INFO 2309
- HOST_DISCOVERY_REQUEST_INFO 2310
- IFL_INFO 2311
- ISL_TRILL_INFO 2312
- ISL_TRUNK_GROUP_MEMBER_INFO 2314
- ISL_TRUNK_INFO 2314
- L2_NEIGHBOR_INFO 2315
- MAPS_EVENT_DETAILS_INFO 2315
- MODULE_INFO 2316
- NPORT_WWN_MAP_INFO 2317
- PHANTOM_PORT_INFO 2318
- PRODUCT_INFO 2318
- PORT_BOTTLENECK_CONF_INFO 2321
- PORT_BOTTLENECK_STAT_INFO 2321
- PORT_GROUP_INFO 2321
- ROLE_PRIVILEGE_INFO 2322
- PORT_PROFILE_INFO 2322
- PORT_PROFILE_INTERFACE_INFO 2323
- PORT_PROFILE_MAC_INFO 2323
- PORT_VLAN_INFO 2324
- SFLOW_MINUTE_L3_VIEW 2326
- SFLOW_MINUTE_MAC_VIEW 2327
- SCOM_EE_MONITOR_INFO 2328
- SENSOR_INFO 2329
- SMART_CARD_USAGE_INFO 2329
- SWITCH_CONFIG_INFO 2330
- SWITCH_DETAILS_INFO 2331
- SWITCH_DISCOVERED_MAC_INFO 2333
- SWITCH_PORT_INFO 2333
- SWITCH_SNMP_INFO 2335
- TIME_SERIES_DATA_INFO 2337
- TIME_SERIES_DATA_VIEW 2338
- TRILL_INFO 2339
- TRILL_TRUNK_INFO 2340
- USER_ROLE_RESOURCE_INFO 2340
- VIRTUAL_FCOE_PORT_INFO 2341
- VIRTUAL_PORT_WWN_DETAILS_INFO 2341
- VM_ADDRESS_INFO 2342
- VM_CONNECTIVITY_INFO 2343
- VM_DATASTORE_DETAILS_INFO 2345
- VM_EE_MONITOR_INFO 2346
- VM_HOST_INFO 2346
- VM_LUN_INFO 2347
- VM_STATISTICS_INFO 2348
- VR_CONN_MODULE_INFO 2350
- VR_CONN_MODULE_PORT_INFO 2351
- VR_CONN_NPIV_INFO 2352
- VMM_DISCOVERED_MAC_INFO 2353
- ZONE_DB_INFO 2354
- PHYSICAL_DEVICE_INFO 2358
- SLOT_INFO 2358
- MANAGED_ELEMENT_INFO 2358
- SNMP_DATA_INFO 2359
- SNMP_EXPR_DATA_INFO 2359
- SNMP_DATA_VIEW 2359
- VM_VNETWORK_INFO 2361
- VCS_CLUSTER_MEMBER_INFO 2363
- RESET_VCS_LICENSED 2363
- WIRELESS_INTERFACE 2364
- WIRED_INTERFACE 2365
- CEE_PORT_INFO 2366
Relacionado con productos y manuales para Software Brocade Network Advisor SAN + IP User Manual v12.1.0
(178 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.078 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales