Brocade Network Advisor SAN + IP User Manual v12.3.0 Manual de usuario descargar pdf (Pagina 167)

Brocade Network Advisor SAN + IP User Manual 97

53-1003155-01

IP discovery profiles

• To edit the included addresses using the address range format, refer to “Editing IP

addresses” on page 97.

7. Select the Also perform ping sweep check box to perform ping sweep on the address range.

8. To edit an excluded address range, select the address range you want to edit in the Excluded

IP Addresses list.

9. Click the left arrow button to display the address range details in the bottom Add/Edit IP

Addresses area.

10. Edit the excluded address range by choosing one of the following options:

• To edit the excluded addresses using the CIDR subnet format, refer to “Editing CIDR

subnet addresses” on page 97.

• To edit the excluded addresses using the subnet format, refer to “Editing subnet

addresses” on page 97.

• To edit the excluded addresses using the address range format, refer to “Editing IP

addresses” on page 97.

NOTE

DCB products discovered through Fabric discovery (on the SAN tab) cannot be excluded.

11. Click the right arrow button to add the address range to the Excluded IP Addresses list.

12. Click Apply to save your changes.

13. Click Close to close the Discover Setup - IP dialog box.

14. Click Yes on the confirmation message.

Editing CIDR subnet addresses

To edit the CIDR subnet address (IPv4 and IPv6) range, complete the following steps.

1. Change the IP address in the IP Address field.

2. Change the number of subnet mask bits in the Subnet Mask Bits field.

For IPv4, the number of subnet mask bits is from 0 through 32.

For IPv6, the number of subnet mask bits is from 0 through 128.

3. To finish editing the address ranges, return to “Editing address ranges” on page 96.

Editing subnet addresses

To edit the subnet address (IPv4 only) range, complete the following steps.

1. Change the IP address in the IP Address field.

2. Change the subnet mask in the Subnet Mask field.

3. To finish editing the address ranges, return to “Editing address ranges” on page 96.

Editing IP addresses

To edit the IP address range (IPv4 and IPv6), complete the following steps.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 269 270

Sin comentarios

Brocade Network Advisor SAN + IP User Manual v12.3.0 Manual de usuario Pagina 167