Brocade Network OS Command Reference v4.1.0 Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
74 Network OS Command Reference
53-1003115-01
chassis enable
2
chassis enable
Enables all interfaces in the chassis.
Synopsis chassis enable
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to enable all interfaces on the local switch. All interfaces that passed the
power-on self-test (POST) are enabled. They may come online if connected to a device, or remain
offline if disconnected. Enter chassis enable to re-enable the chassis after making configuration
changes or running offline diagnostics.
Usage Guidelines This command is supported only on the local switch.
You must execute the chassis enable command after running offline diagnostics, or the switch will
not boot correctly.
Examples To enable all interfaces on the local switch:
switch# chassis enable
See Also chassis disable
Vista de pagina 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 140 141

Comentarios a estos manuales

Sin comentarios