Brocade Network Advisor IP User Manual v12.3.0 Manual de usuario Pagina 149
- Pagina / 192
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Network Advisor IP User Manual 95
53-1003153-01
Individual IP device discovery
3
c. Change the unique user name in the Login Prompt User Name field.
The user name can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters.
d. Change the password in the Login Prompt Password field.
The password can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
e. Change the unique user name in the Enable Prompt User Name field.
The user name can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. Not applicable to DCB devices.
f. Change the password in the Enable Prompt Password field.
The password can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks. Not applicable to DCB
devices.
10. Change the Port Config credentials by completing the following steps.
NOTE
These credentials are not applicable for DCB, VDX, or VCS devices.
a. Click the Port Config Credentials tab.
FIGURE 43 Port Config credentials
b. Change the unique user name in the Login Prompt User Name field.
The user name can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters.
c. Change the password in the Login Prompt Password field.
The password can be from 8 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
d. Change the unique user name in the Enable Prompt User Name field.
The user name can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters.
e. Change the password in the Enable Prompt Password field.
The password can be from 8 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
- Brocade Network Advisor 1
- Document History 2
- Contents 5
- Chapter 2 Patches 6
- Chapter 3 Discovery 6
- Chapter 4 Management Groups 7
- Chapter 7 Web Client 10
- Chapter 9 View Management 12
- Chapter 10 MRP Topology 13
- Chapter 11 Call Home 13
- Chapter 12 Third-party tools 14
- Chapter 15 VCS Management 16
- Chapter 16 Host Management 17
- Chapter 18 Telemetry 19
- Chapter 20 Zoning 20
- Chapter 21 Port Fencing 22
- Chapter 22 FICON Environments 22
- Chapter 23 IP Element Manager 23
- Chapter 28 VLAN Management 25
- Chapter 29 MPLS Management 26
- Chapter 30 VIP Servers 27
- Chapter 33 Deployment Manager 28
- Chapter 34 Performance Data 28
- Chapter 35 Frame Monitor 30
- Chapter 36 Power Center 30
- Chapter 37 Policy Monitor 30
- Chapter 38 Fault Management 31
- Chapter 40 Technical Support 33
- Chapter 41 Reports 33
- Appendix A Application menus 34
- Appendix C Event Categories 34
- Appendix D User Privileges 34
- Appendix E Device Properties 35
- Appendix G CLI Templates 35
- Appendix H Troubleshooting 35
- Appendix I Database Fields 35
- About This Document 39
- What’s new in this document 47
- Document conventions 50
- Notice to the reader 51
- Additional information 51
- Getting technical help 52
- Document feedback 52
- Getting Started 55
- FIGURE 1 Main window 56
- Management server and client 57
- Launching a remote client 58
- Logging into the web client 59
- • Server IP 60
- • Server Ports 60
- Viewing active sessions 64
- Disconnecting users 64
- Viewing server properties 65
- Viewing port status 66
- Server and client ports 67
- Keyboard shortcuts 71
- Look and feel customization 72
- Changing the font size 73
- Product improvement 74
- Data transfer 75
- PostgreSQL database 76
- > ./edb_psqlodbc.bin 78
- Installing a patch 85
- Uninstalling a patch 86
- Discovery 89
- IP discovery overview 90
- • Lazy polling 91
- Configuration requirements 92
- Discovery of IPv6 addresses 92
- VDX/VCS discovery 95
- # DeviceWWNToIPMap.txt 96
- In-band IP address 96
- Standalone discovery 97
- VCS fabric discovery 97
- VCS fabric rediscovery 97
- Seed switch failover 98
- VCS fabric split and merge 98
- 53-1003153-01 100
- HyperEdge stack discovery 102
- IP SNMP credentials 104
- Adding SNMPv3 credentials 105
- FIGURE 14 SNMPv3 credentials 106
- Editing SNMPv3 credentials 108
- Default IP user credentials 110
- FIGURE 15 Default Passwords 111
- FIGURE 18 Enable Super User 112
- IP Object identifier filters 116
- Excluding product types 117
- FIGURE 20 Preferences tab 118
- IP discovery profiles 121
- FIGURE 21 Profile tab 122
- Configuring address ranges 124
- Adding CIDR subnet addresses 125
- Adding subnet addresses 125
- Adding IP addresses 126
- Excluding subnet addresses 127
- Excluding IP addresses 127
- Editing address ranges 128
- Scheduling discovery 129
- Editing a discovery schedule 134
- FIGURE 35 Preferences tab 136
- Deleting a discovery profile 137
- Starting discovery manually 138
- Stopping discovery 139
- Viewing discovery status 139
- Viewing discovery reports 139
- E-mailing discovery reports 140
- Exporting discovery reports 140
- Viewing the discovery log 141
- FIGURE 37 SNMPv3 credentials 143
- • CBC-DES 144
- • CFB_AES-128 144
- Editing IP device discovery 145
- • HMAC_MD5 146
- • HMAC_SHA 146
- FIGURE 41 SNMPv1/v2c settings 148
- Host discovery 151
- Importing Hosts from a fabric 155
- VM Manager discovery 162
- Discovering a VM manager 163
- Editing a VM manager 164
- Device_IP_Address 167
- IP Rediscovery 168
- Rediscovering a group 169
- Management Groups 171
- Product group overview 172
- Static product groups 173
- Dynamic product groups 175
- Viewing test results 180
- Deleting a product group 181
- Port Groups 182
- Editing a port group 183
- Duplicating a port group 183
- Viewing port group properties 184
- • Enable 185
- • Disable 185
- Deleting a port group 186
- Application Configuration 187
- Server Data backup 188
- What is backed up? 189
- Management server backup 189
- Configuring backup 189
- Enabling backup 191
- Disabling backup 192
- Viewing the backup status 192
- Changing the backup interval 192
- Starting immediate backup 193
- Reviewing backup events 193
- Server Data restore 194
- SAN data collection 195
- Event storage settings 199
- Flyover settings 200
- • Display Name 201
- • IP Address 201
- • Status 201
- Turning flyovers on or off 202
- Viewing flyovers 202
- Name settings 203
- Viewing names 204
- Adding a name to a new device 207
- Removing a name from a device 207
- Editing names 208
- Exporting names 208
- Importing Names 208
- Device Character limit 209
- Searching for a device by WWN 210
- Configuring the server name 210
- Configuring login security 211
- Syslog Registration settings 212
- Software Configuration 215
- Client/Server IP 216
- • Select All. Go to step 4 217
- IP preferences 220
- Configuring SNMP preferences 226
- Configuring TFTP preferences 226
- Memory allocation settings 227
- Configuring asset polling 229
- Configuring SAN communication 230
- Configuring IP communication 232
- FTP/SCP/SFTP server settings 233
- Server port settings 238
- Support mode settings 239
- FIPS Support 241
- User Account Management 243
- User accounts 247
- Editing a user account 249
- Copying a user account 249
- Exporting a user account 250
- Importing a user account 251
- Disabling a user account 252
- Enabling a user account 252
- Deleting a user account 253
- Unlocking a user account 253
- Creating a new role 253
- Editing a role 254
- Copying a role 255
- Deleting a role 255
- Adding privileges to a role 255
- Areas of responsibility 257
- Editing an AOR 258
- Copying an AOR 259
- Deleting an AOR 259
- Assigning products to an AOR 259
- Password policies 261
- User profiles 264
- Editing your user profile 265
- Changing your password 266
- Viewing your password policy 266
- Resetting optional messages 267
- Configuring CLI credentials 268
- Web Client 271
- Dashboard 272
- Dashboard toolbar 274
- General dashboard functions 274
- Dashboard customization 275
- • Any user-defined group 276
- • All products and fabrics 276
- • Any Ethernet fabric 276
- • Any system-defined group 276
- Setting the time interval 277
- Default dashboards 277
- Status widgets 279
- Access Point Status widget 280
- on page 223Events widget 280
- Host Adapter Inventory widget 281
- IP Inventory widget 283
- IP Status widget 284
- Status widget 285
- Fabric Watch widgets 286
- Port Health Violations widget 288
- Performance monitors 289
- Top Port C3 Discards monitor 291
- Top Port CRC Errors monitor 293
- Top Port Discards monitor 294
- Top Port Errors monitor 296
- Top Port Receive EOF monitor 298
- Top Port Sync Losses monitor 300
- Top Port Traffic monitor 303
- Inventory 316
- Fabric summary view 317
- FIGURE 105 Fabric summary 318
- FIGURE 106 Fabric Page area 318
- FIGURE 108 Host Details table 319
- FIGURE 110 Events table 320
- Viewing fabric properties 322
- Product summary view 323
- FIGURE 115 Port Details area 324
- FIGURE 116 Violations table 326
- FIGURE 117 Events table 326
- Viewing product properties 329
- Port summary view 330
- FIGURE 120 Port summary 331
- FIGURE 121 Violations table 332
- FIGURE 123 Events page 334
- Table functions 335
- Reports toolbar 336
- General report page functions 337
- Generating a report 337
- Generated reports 339
- Report schedules 340
- Configuring a new schedule 341
- E-mailing reports 345
- Editing a schedule 345
- Activating a schedule 346
- Deactivating a schedule 346
- Report templates 347
- Exporting report templates 348
- Importing report templates 349
- Sharing report templates 349
- Default reports 350
- Fabric Ports report 354
- Switch Report 357
- Zone Summary reports 359
- Dashboard Management 365
- FIGURE 136 Dashboard tab 366
- Dashboard messages 368
- Dashboard Privileges 369
- Accessing a dashboard 370
- Filtering the dashboards list 370
- Setting the dashboard display 373
- • Type — The type of monitor 374
- Setting the network scope 376
- Setting the time scope 379
- Dashboard playback 380
- Events widget 384
- Color Severity 385
- Monitor types 423
- Measures 423
- TABLE 33 Port measures types 427
- Wireless 437
- View Management 439
- IP main toolbar 441
- Product List toolbar 441
- Host Product List toolbar 443
- Topology Map toolbar 443
- Host topology map toolbar 444
- IP Product List 444
- Topology Map 445
- Topology Map functions 446
- Master Log 447
- FIGURE 180 IP Minimap 448
- Status bar 449
- Icon legend 450
- IP product icons 451
- Host product icons 451
- IP group icons 452
- IP port icons 452
- IP product status icons 452
- Customizing the main window 453
- Exporting the topology 454
- Displaying columns 455
- Changing the order of columns 455
- Resizing the columns 456
- Sorting table information 456
- Copying table information 456
- Exporting table information 456
- Product List customization 457
- Adding a property label 458
- Editing a property label 458
- Deleting a property label 459
- Searching for a device 460
- Restricting a search by node 460
- Address Finder 461
- Finding IP addresses 462
- Finding MAC addresses 464
- IP topology view manager 467
- Network Objects view 468
- IP Topology view 470
- L2 Topology view 470
- Ethernet Fabrics view 471
- VLAN Topology view 471
- STP/RSTP topology 472
- Generating an STP/RSTP Report 473
- Exporting an STP/RSTP Report 473
- Host Topology view 474
- IP topology map components 476
- TABLE 42 Legend components 477
- Topology map layout 478
- Orthogonal 479
- Orthogonal (Merge Lines) 480
- Hierarchical 480
- Circular 481
- Free Form 481
- Creating a customized layout 482
- Customizing the Topology Map 484
- Printing a map 487
- Port actions 488
- Disabling port actions 489
- MRP Topology 491
- Viewing a MRP Topology map 492
- Viewing a MRP ring 493
- TABLE 44 494
- • Organic 496
- • Hierarchical 496
- • Self Organizing 497
- • Circular 497
- Refreshing MRP Topology data 500
- Viewing MRP properties 500
- Call Home 503
- overview 503
- System requirements 505
- Showing a Call Home center 508
- Hiding a Call Home center 508
- Editing a Call Home center 509
- Enabling a Call Home center 516
- Enabling supportSave 516
- Disabling a Call Home center 517
- Viewing Call Home status 518
- Defining an event filter 520
- Third-party tools 525
- Launching a Telnet session 526
- Launching an Element Manager 526
- Launching HCM Agent 527
- Adding a tool 527
- Server Management Console 535
- Services tab 536
- Refreshing the server status 537
- Stopping all services 537
- Stopping the CIMOM services 537
- Starting all services 538
- Restarting all services 538
- Ports tab 539
- AAA Settings tab 540
- Configuring a Radius server 541
- Configuring an LDAP server 545
- Configuring a TACACS+ server 547
- Radius server configuration 552
- LDAP server configuration 554
- Loading an AD group 558
- Restore tab 560
- HCM Upgrade tab 562
- SMI Agent Configuration Tool 562
- FIGURE 207 Log In dialog box 563
- SLP on UNIX systems 567
- SLP on Windows systems 568
- Home tab 569
- Authentication tab 570
- CIMOM tab 572
- Configuring the CIMOM log 574
- Certificate Management tab 575
- Viewing a certificate 576
- Exporting a certificate 576
- Summary tab 577
- FIGURE 212 Summary tab 578
- “Managed count” on page 35 579
- Wireless Management 581
- Wireless devices 582
- Wireless device discovery 583
- Port groups 583
- View management 584
- Wireless device properties 584
- Element Manager 585
- CLI configuration management 587
- Cluster mode 588
- VLAN management 588
- Performance management 589
- Policy Monitors 589
- Fault management 589
- Detailed AP Products report 591
- VCS Management 593
- VCS mode types 594
- Network OS 599
- VCS product groups 600
- Port profiles 600
- AMPP characteristics 601
- Life of a port profile 601
- AMPP events and behavior 602
- Management application 603
- • “Comparing port profiles” 604
- • “Deploying port profiles” 604
- Comparing port profiles 605
- Deploying port profiles 608
- FRU monitoring 609
- System thresholds 610
- Alert notifications 610
- Resource monitoring 610
- SFP parameter monitoring 611
- Security monitoring 611
- Port statistics monitoring 611
- Ethernet fabric traceroute 612
- Ethernet_Fabric 616
- Exporting diagnostic data 617
- Host Management 619
- Supported adapters 620
- Converged Network Adapters 621
- Fabric Adapters 621
- technology 621
- HCM software 622
- HCM features 623
- Host adapter discovery 624
- VM Manager 624
- Editing a VM Manager 625
- Deleting a VM Manager 625
- ESXi CIM listener ports 625
- Adapter software 627
- Driver repository 628
- Boot image repository 629
- Bulk port configuration 632
- Adding a port configuration 633
- Editing a port configuration 636
- Deleting a port configuration 636
- FAWWNs on attached AG ports 639
- Adding AG port FAWWNs 640
- Deleting AG port FAWWNs 640
- Role-based access control 641
- Host performance management 642
- Host security authentication 643
- Host fault management 645
- Backup support 646
- Fibre Channel over Ethernet 649
- Enhanced Ethernet features 650
- FCoE protocols supported 651
- FCoE licensing 652
- Saving running configurations 652
- DCB configuration management 654
- Switch policies 655
- DCB configuration 656
- Configuring LLDP 659
- Adding a LAG 661
- FIGURE 243 Add LAG dialog box 662
- Editing a DCB switch 664
- Editing a DCB port 665
- Editing a LAG 666
- Enabling a DCB port or LAG 668
- QoS configuration 669
- Creating a DCB map 670
- Editing a DCB map 672
- Deleting a DCB map 672
- Creating a Traffic Class map 674
- Editing a Traffic Class map 675
- Deleting a Traffic Class map 675
- FCoE provisioning 677
- VLAN classifier configuration 679
- • ARP — 0x0808 680
- • IP — 0x8881 680
- • IPv6 — 0x86DD 680
- LLDP-DCBX configuration 683
- Adding an LLDP profile 684
- Editing an LLDP profile 685
- Deleting an LLDP profile 685
- 802.1x authentication 686
- FIGURE 251 802.1x dialog box 688
- Deploy to Ports dialog box 690
- Deploy to LAGs dialog box 690
- • LLDP Profiles 692
- Supported VCS platforms 694
- Viewing switches in VCS mode 694
- Viewing ports in VCS mode 697
- QoS - Non-DCB 699
- Viewing LAGs in VCS mode 701
- DCB performance 705
- Historical performance graph 707
- Historical performance report 707
- FCoE login groups 708
- Adding an FCoE login group 709
- Editing an FCoE login group 710
- • “FCoE login groups” 712
- Viewing virtual FCoE ports 713
- Clearing a stale entry 714
- Telemetry 717
- Viewing existing PBR policies 718
- Adding a new policy 720
- Adding rules to a policy 720
- • ACL Name — Name of the ACL 721
- Editing a policy 722
- Editing a rule 722
- Deleting a policy or rule 723
- ACL Accounting 728
- Viewing ACL counters 729
- Security Management 731
- Device_Name 732
- • Any — Any of the protocols 734
- Port_Number 737
- Fabric_Name 748
- FIGURE 273 751
- Clearing L3 ACL assignments 767
- Configuring hit statistics 768
- Network configuration 773
- Creating a network 774
- Editing a network 775
- Copying a network 776
- Deleting a network 776
- Network group configuration 777
- Creating a network group 778
- Editing a network group 779
- Copying a network group 780
- Service configuration 782
- Viewing existing services 783
- Creating a service 784
- Editing a service 785
- Copying a service 785
- Deleting a service 786
- Service group configuration 787
- Creating a service group 788
- Editing a service group 789
- Copying a service group 790
- Deleting a service group 791
- • = (equal to) 794
- • != (not equal to) 794
- • > (greater than) 794
- • < (less than) 794
- Editing a MAC filter 795
- Copying a MAC filter 796
- Deleting a MAC filter 798
- Assigning MAC filters 798
- Zoning overview 807
- Online zoning 808
- Offline zoning 809
- Zoning naming conventions 809
- Zone database size 810
- Zoning configuration 810
- Creating a zone 811
- Viewing zone properties 811
- Adding members to a zone 812
- Creating a member in a zone 813
- Removing a member from a zone 813
- Renaming a zone 814
- Deleting a zone 815
- Duplicating a zone 815
- Creating a zone alias 817
- Editing a zone alias 817
- Exporting zone aliases 819
- Renaming a zone alias 819
- Deleting a zone alias 819
- Duplicating a zone alias 820
- Creating a zone configuration 820
- Renaming a zone configuration 824
- Refreshing a zone database 827
- Merging fabrics 827
- Merging two zone databases 828
- Zoning administration 831
- Comparing zone databases 832
- Listing zone members 837
- Listing un-zoned members 837
- Removing an offline device 838
- Replacing zone members 838
- Port Fencing 841
- Thresholds 844
- C3 Discard Frames threshold 845
- Invalid CRCs threshold 846
- Invalid words threshold 846
- Link Reset threshold 846
- Protocol error threshold 846
- State Change threshold 846
- Adding thresholds 847
- Adding a Link Reset threshold 851
- Assigning thresholds 855
- Unblocking a port 855
- Editing thresholds 856
- Finding assigned thresholds 860
- Viewing thresholds 860
- Removing thresholds 861
- FICON Environments 863
- Planning the configuration 864
- Configuring the switch 866
- FIGURE 314 Firmware download 868
- Configuring FICON display 870
- Changing window arrangement 877
- Clearing port names 877
- Cascaded FICON fabric 878
- Enabling DLS 880
- Cascaded FICON fabric merge 881
- Resolving merge conflicts 885
- Viewing port groups 887
- Swapping blades 889
- IP Element Manager 891
- Switch properties 894
- Properties dialog box 895
- Element Manager toolbar 896
- Displaying port properties 897
- VLAN View port properties 898
- Status indicator icons 901
- Table capabilities 901
- Performance data 902
- Configure dialog box 903
- Management Module switchover 904
- Switch Fabric Module 905
- Port mirroring 906
- FIGURE 338 sFlow dialog box 908
- Adding a VRRP/VRRP-E router 909
- VRF management 910
- FIGURE 341 Selecting VRF 911
- Adding VRF in an MLX device 912
- Deleting VRF in an MLX device 912
- Web Management interface 913
- TABLE 84 Troubleshooting 914
- Configuration file manager 915
- Viewing the configuration 920
- FIGURE 347 Compare dialog box 921
- Restoring a configuration 923
- Configuration deviation 925
- Change tracking 926
- RASLog events 928
- Configuration snapshots 934
- FIGURE 351 Compare dialog box 936
- • Not Applicable 937
- VLAN configuration name 938
- Schedule backup 941
- Disabling a backup schedule 943
- IP Configuration Wizard 945
- Payloads 946
- Interface Payloads: 947
- Payload name Description 947
- • Save to Flash 951
- • Save to Flash and Reload 951
- CLI Configuration Management 957
- CLI configuration overview 957
- Viewing existing templates 958
- Changing product credentials 964
- Previewing CLI commands 966
- CLI command guidelines 967
- Testing a configuration 969
- Deleting a configuration 973
- CLI configuration deployment 974
- Monitoring configurations 975
- CLI deployment reports 982
- CLI configuration scheduling 983
- Obtaining software files 987
- Boot image management 988
- Software image management 991
- Unified image management 994
- Updating unified images 997
- Updating firmware serially 997
- VLAN Management 1001
- Super-aggregated VLAN 1002
- Private VLAN 1002
- Remote Switched Port Analyzer 1002
- Transparent LAN Support 1003
- Displaying a list of VLANs 1004
- VLAN Manager tabs 1005
- Displaying VLANs by products 1007
- FIGURE 385 MAC Group Address 1008
- Port VLANs 1010
- Assigning DCB ports to a VLAN 1013
- Adding VLAN properties 1013
- Deploying VLAN configurations 1016
- Target context STP type 1018
- Configuring MSTP on a product 1020
- VLAN routing 1022
- MPLS Management 1025
- MPLS licensing 1026
- MPLS overview 1027
- Viewing LSP path information 1030
- Viewing RSVP LSP information 1032
- Adding an LSP admin group 1034
- Editing an LSP admin group 1035
- Deleting an LSP admin group 1036
- Adding an LSP path 1036
- Editing an LSP path 1037
- Duplicating an LSP path 1038
- Deleting an LSP path 1038
- FIGURE 410 Bypass LSP 1045
- Editing an RSVP LSP 1046
- Duplicating an RSVP LSP 1046
- Deleting an RSVP LSP 1046
- Displaying LSP Topologies 1048
- LSP Topology View Options 1049
- PE Router PE Router 1050
- Penultimate Egress 1050
- Tunnel LSP 1050
- VLL manager 1051
- VLL Manager Views tab 1052
- Editing a VLL instance 1063
- Deleting VLL instances 1063
- VPLS Manager 1067
- Configuring endpoint settings 1073
- Editing a VPLS instance 1078
- Deleting a VPLS instance 1078
- VCID pools 1080
- Editing a MEP 1089
- Sending a loopback message 1094
- Sending a linktrace message 1095
- Configuring frame delay 1097
- VIP Servers 1099
- Server port statistics 1103
- Global Server Load Balancing 1105
- Viewing the GSLB Manager 1106
- GSLB policy management 1107
- GSLB site management 1113
- GSLB zone configuration 1115
- Adding a host to a zone 1117
- Deleting a zone configuration 1118
- Controller configuration 1119
- • Metric used 1120
- Scheduling a deployment 1122
- In this chapter 1125
- SSL certificates 1125
- SSL certificate configuration 1126
- Creating key passwords 1139
- Appending SSL certificates 1141
- Chaining SSL certificates 1141
- Deleting SSL certificates 1143
- Deployment Manager 1145
- Deploying a configuration 1147
- Viewing deployment logs 1147
- Performance Data 1151
- SAN performance measures 1152
- Example of SNMP v1 1154
- SAN performance overview 1155
- Example of showing FCIP-MIB 1157
- Example of enabling FCIP-MIB 1157
- Example for FC ports 1158
- Example for FCIP tunnels 1158
- Graph display 1161
- TABLE 95 Performance counters 1163
- IP configuration requirements 1165
- Adding measures to products 1168
- Adding measures to ports 1169
- Removing measures from ports 1170
- • 5 minutes 1173
- • 30 minutes 1173
- • 2 hours 1173
- Configuring graph options 1174
- FIGURE 468 Data points graph 1175
- Exporting a graph 1176
- Printing a graph 1177
- Editing system collectors 1178
- • Click Add 1189
- Deleting an expression 1190
- FIGURE 480 1191
- FIGURE 481 1191
- Mouse functions for graphs 1194
- MIB data collectors 1195
- IP Custom performance reports 1196
- Up to 2 years 1 day 1198
- IP sFlow configuration 1201
- TABLE 98 Interface Payload 1203
- Creating custom sFlow reports 1206
- 3. Click Add 1217
- Selecting a report 1221
- Measure list 1222
- Refresh list 1222
- 2D or 3D button 1222
- Graph check box 1222
- Table check box 1222
- Show DNS Name 1223
- Include Remaining Talkers 1223
- Date and time 1223
- Viewing top MAC talkers 1225
- Viewing top VLAN talkers 1225
- ID of the well-known port 1227
- Viewing IPv4 – Others 1231
- Viewing IPv6 Top Talkers 1231
- Valid TCP flags report 1234
- Viewing BGP paths report 1235
- IP traffic accounting 1236
- Frame Monitor 1239
- Frame types 1240
- Frame Monitoring requirements 1241
- Editing a frame monitor 1243
- Power Center 1247
- Data monitoring 1248
- Viewing PoE data for ports 1249
- Filtering port details 1250
- Viewing PoE charts 1253
- Refreshing PoE data 1256
- PoE power on demand 1257
- Schedule_Name 1266
- PoE thresholds 1268
- Adding a PoE port threshold 1270
- Viewing PoE thresholds 1272
- Updating a PoE threshold 1273
- Enabling PoE thresholds 1274
- Disabling PoE thresholds 1274
- Viewing PoE performance 1275
- • Allocation (W) 1276
- • Allocation % 1276
- • Consumption % 1278
- Policy Monitor 1281
- Fabric policy monitors 1282
- Icon Description 1288
- Configuration rules 1298
- Adding a configuration rule 1302
- Editing a configuration rule 1304
- Deleting a configuration rule 1306
- Selecting a product 1308
- Predefined conditions 1310
- Adding a configuration block 1313
- Predefined blocks 1316
- Predefined blocks (Continued) 1317
- Policy_Name 1318
- Fault Management 1325
- Event notification 1326
- ATTENTION 1327
- Defining filters 1328
- SNMP traps 1331
- SNMP trap forwarding 1333
- Adding a trap destination 1334
- Adding a new trap filter 1335
- Event reception 1337
- Adding an SNMP v3 credential 1339
- Trap customization 1341
- Registering traps 1342
- • Information about the trap 1343
- SNMP informs 1344
- Adding a syslog recipient 1345
- Removing a syslog recipient 1346
- Syslog forwarding 1347
- Adding a syslog filter 1348
- Event action definitions 1350
- Configuring varbind filters 1353
- Editing event actions 1358
- Special events handling 1361
- Acknowledging special events 1361
- Pseudo events 1367
- Setting pseudo event policies 1368
- Filtering pseudo event traps 1369
- Event custom reports 1378
- Defining report settings 1379
- Defining the report identity 1381
- 4. Click the Filter tab 1383
- Editing a report definition 1386
- Event custom report schedules 1387
- Event logs 1390
- Copying an entire log entry 1391
- Exporting the entire log 1391
- TABLE 106 Event Properties 1393
- Copying the entire Master Log 1394
- Exporting the Master Log 1394
- The “unnamed” filter 1397
- The “none” filter 1397
- Editing a filter 1397
- Duplicating a filter 1397
- Deleting a filter 1397
- Notes on filters 1398
- Packet Capture (Pcap) 1399
- C:\\SNORT\bin\SNORT.exe -c 1400
- Technical Support 1401
- Device technical support 1405
- Field Description 1410
- Field/Component Description 1412
- FTP server 1413
- Reports overview 1415
- IP report types 1415
- Viewing IP reports 1416
- IP Wired Products report 1418
- Detailed Product Report 1419
- Detailed Cluster Report 1423
- AP Products report 1426
- Module List report 1427
- Port VLAN report 1428
- Layer 3 VLAN report 1428
- IP Subnet List report 1429
- IP Address List report 1429
- MAC Address List report 1430
- Deployment reports 1432
- Preconfigured reports 1433
- User-defined reports 1433
- Viewing a report 1435
- Importing a report template 1436
- Exporting a report template 1436
- Deleting reports 1436
- Report content and functions 1437
- Products List report 1438
- Ports Tx/Rx Ratio report 1443
- Low Traffic Ports report 1445
- Host adapter reports 1446
- Adapters Inventory report 1447
- Adapters Faulty SFP report 1448
- Application menus 1451
- IP main menus 1452
- IP shortcut menus 1458
- Call Home Event Tables 1465
- Event Categories 1467
- Product audit events 1468
- Security events 1469
- User action events 1470
- Management server events 1470
- Product events 1471
- RASLog Events 1471
- User Privileges 1475
- About user privileges 1476
- • Fabric Ports 1481
- • Fabric Summary 1481
- IP privileges and behavior 1488
- About Roles and Access Levels 1491
- Device Properties 1495
- TABLE 137 Fabric properties 1496
- Viewing SAN device properties 1497
- Device properties (Continued) 1498
- • FC Ports 1499
- • GigE Ports 1499
- • IP Ports 1499
- • iSCSI Ports 1499
- • Virtual Sessions Ports 1499
- Viewing storage properties 1500
- Viewing iSCSI properties 1502
- TABLE 140 iSCSI Properties 1503
- Viewing port properties 1504
- TABLE 141 Port properties 1505
- • Authentication Algorithm 1506
- • Encryption Algorithm 1506
- • Diffie-Hellman 1506
- • SA Life 1506
- Port properties (Continued) 1507
- • IP Ping 1508
- • IP Traceroute 1508
- • IP Performance 1508
- IP device properties 1509
- Viewing VCS fabric properties 1514
- Host properties 1521
- 3. Click OK to close 1524
- Properties customization 1525
- Deleting a property field 1526
- 4. Click OK 1527
- Regular Expressions 1529
- TABLE 2 Character classes 1530
- TABLE 1 Characters 1530
- TABLE 7 Boundary matches 1531
- TABLE 8 Greedy quantifiers 1532
- TABLE 9 Reluctant quantifiers 1532
- TABLE 11 Logical operators 1532
- TABLE 12 Back references 1533
- CLI Templates 1535
- MCT Cluster Creation 1539
- MCT Cluster Deployment 1539
- MCT Cluster Undeployment 1539
- TABLE 31 MCT Cluster Deletion 1540
- TABLE 32 MCT Client Creation 1540
- TABLE 33 MCT Client Deletion 1540
- MPLS – Endpoint Configuration 1541
- Troubleshooting 1553
- Browser troubleshooting 1554
- Problem Resolution 1555
- Launch Client troubleshooting 1557
- Patch troubleshooting 1559
- Server troubleshooting 1560
- Supportsave troubleshooting 1562
- Wireless troubleshooting 1563
- Zoning troubleshooting 1564
- Database Fields 1565
- TABLE 19 ACH_EVENT_FILTER_MAP 1566
- TABLE 20 ACH_FILTER 1566
- TABLE 21 ACH_INFO 1566
- TABLE 22 AD_GROUP 1566
- TABLE 26 AOR_DEVICE_GROUP_MAP 1567
- TABLE 34 BIRTREPORT_PARAMETER 1569
- • 1 indicates PDF 1570
- • 2 indicates CSV 1570
- Database tables and fields 1571
- BIRTREPORT_SCHEDULE_PARAMETER 1571
- BIRTREPORT_SCHEDULE_TEMPLATE 1571
- BIRTTEMPLATE_PARAMETER 1571
- BOOT_IMAGE_DRIVER_MAP 1571
- TABLE 42 BOOT_LUN_SEQUENCE 1572
- TABLE 44 CAPABILITY_ 1572
- TABLE 45 CARD 1572
- TABLE 45 CARD (Continued) 1573
- • 0 - 1G 1574
- • 1 - 10G 1574
- • 2 - Dual mode 1574
- • 3 - Failover mode 1574
- TABLE 50 CEE_PORT 1575
- TABLE 51 CFG_BACKUP_ARCHIVE 1575
- TABLE 52 CHANGELOG 1576
- TABLE 53 CLI_TEMPLATE 1576
- TABLE 54 CLIENT_VIEW 1577
- TABLE 55 CLIENT_VIEW_COLUMN 1578
- TABLE 56 CLIENT_VIEW_MEMBER 1578
- TABLE 58 CLUSTER 1578
- TABLE 59 CLUSTER_MEMBER 1578
- TABLE 60 CNA_ETH_PORT 1579
- TABLE 62 CNA_ETH_PORT_CONFIG 1579
- TABLE 63 CNA_PORT 1580
- TABLE 64 COLLECTOR 1580
- TABLE 68 CONFIG_BLOCK 1581
- TABLE 69 CONFIG_CONDITION 1582
- TABLE 70 CORE_SWITCH 1582
- CORE_SWITCH (Continued) 1583
- TABLE 72 CORE_SWITCH_CHECKSUM 1584
- TABLE 74 CORE_SWITCH_DETAILS 1584
- • 1 is supported 1585
- • 0 is not supported 1585
- TABLE 75 CRYPTO_HOST 1586
- TABLE 76 CRYPTO_LUN 1587
- CRYPTO_LUN (Continued) 1588
- TABLE 77 CRYPTO_SWITCH 1589
- CRYPTO_TARGET_CONTAINER 1590
- CRYPTO_SWITCH (Continued) 1590
- TABLE 80 DASHBOARD 1591
- TABLE 81 DASHBOARD_CANVAS 1592
- TABLE 83 DASHBOARD_PROVIDER 1592
- TABLE 84 DASHBOARD_WIDGET 1593
- TABLE 86 DEFAULT_FAVORITES 1594
- DEFAULT_WIDGET_PREFERENCE 1595
- DEPLOYMENT_CONFIGURATION 1595
- DEFAULT_FAVORITES (Continued) 1595
- • 1-Presnapshot 1596
- • 2-Postsnapshot 1596
- • 3-Pre & Post snapshot 1596
- TABLE 92 DEPLOYMENT_STATUS 1597
- TABLE 94 DEVICE 1598
- TABLE 94 DEVICE (Continued) 1599
- TABLE 95 DEVICE_CONNECTION 1604
- TABLE 96 DEVICE_ENCLOSURE 1605
- DEVICE_ENCLOSURE_MEMBER 1606
- DEVICE_ENCLOSURE (Continued) 1606
- TABLE 98 DEVICE_FDMI_DETAILS 1607
- TABLE 99 DEVICE_GROUP 1607
- TABLE 100 DEVICE_GROUP_ENTRY 1608
- TABLE 101 DEVICE_GROUP 1608
- TABLE 103 DEVICE_NODE 1608
- TABLE 104 DEVICE_PORT 1609
- TABLE 107 DISK_USAGE 1611
- TABLE 108 ENCRYPTION_ENGINE 1611
- ENCRYPTION_ENGINE (Continued) 1612
- TABLE 109 ENCRYPTION_GROUP 1613
- ENCRYPTION_GROUP (Continued) 1614
- ENCRYPTION_GROUP_MEMBER 1615
- ENCRYPTION_KMIP_PARAMETERS 1615
- ENCRYPTION_TAPE_POOL 1615
- TABLE 113 ETHERNET_CLOUD 1616
- TABLE 114 ETHERNET_ISL 1616
- TABLE 115 EVENT 1616
- TABLE 115 EVENT (Continued) 1617
- TABLE 116 EVENT_CALL_HOME 1618
- TABLE 117 EVENT_CATEGORY 1618
- TABLE 118 EVENT_DESCRIPTION 1618
- TABLE 119 EVENT_DETAILS 1618
- TABLE 120 EVENT_FWD_FILTER 1619
- TABLE 121 EVENT_INSTANCE 1619
- TABLE 122 EVENT_MODULE 1620
- TABLE 123 EVENT_NOTIFICATION 1620
- TABLE 124 EVENT_ORIGIN 1621
- TABLE 125 EVENT_POLICY 1621
- TABLE 127 EVENT_PROCESSOR_MAP 1622
- TABLE 128 EVENT_RULE 1623
- TABLE 129 EVENT_RULE_ACTION 1623
- TABLE 130 FABRIC 1624
- TABLE 130 FABRIC (Continued) 1625
- TABLE 131 FABRIC_CHECKSUM 1626
- TABLE 132 FABRIC_COLLECTION 1626
- TABLE 135 FABRIC_MEMBER 1627
- TABLE 139 FAVORITES 1628
- TABLE 142 FCIP_TUNNEL 1629
- FCIP_TUNNEL (Continued) 1630
- FCIP_TUNNEL_CIRCUIT 1632
- FCIP_TUNNEL_PERFORMANCE 1635
- TABLE 145 FCOE_DEVICE 1636
- TABLE 146 FCR_ROUTE 1636
- TABLE 147 FEATURE 1636
- TABLE 148 FEATURE_EDITION_MAP 1636
- TABLE 149 FEATURES_USAGE 1636
- TABLE 150 FICON_DEVICE_PORT 1637
- TABLE 153 FOUNDRY_DEVICE 1638
- TABLE 154 FOUNDRY_MODULE 1638
- TABLE 157 FPORT_TRUNK_GROUP 1639
- TABLE 158 FPORT_TRUNK_MEMBER 1639
- TABLE 159 FRU 1640
- TABLE 160 FTP_SERVER 1641
- TABLE 161 GENERATED_REPORT 1641
- TABLE 159 FRU (Continued) 1641
- TABLE 162 GIGE_PORT 1642
- TABLE 164 GIGE_PORT_STATS 1643
- TABLE 165 GLOBAL_VLAN 1643
- TABLE 167 HA_CLUSTER 1644
- TABLE 168 HBA 1644
- TABLE 168 HBA (Continued) 1645
- • HBA/CNA/AnyIO/Mezzanine 1646
- • 0 - Unknow 1647
- • 1 - Yes 1647
- • 2 - No 1647
- TABLE 171 HBA_PORT_DETAIL 1648
- HBA_PORT_DETAIL (Continued) 1649
- HBA_PORT_DEVICE_PORT_MAP 1650
- HBA_PORT_FCOE_DETAILS 1650
- TABLE 174 HBA_REMOTE_PORT 1652
- HBA_REMOTE_PORT_LUN 1653
- HBA_REMOTE_PORT (Continued) 1653
- TABLE 176 HBA_TARGET 1654
- TABLE 177 HEALTH_STATUS 1654
- HOST_DISCOVERY_OPTIONS 1655
- HOST_DISCOVERY_REQ_GROUP 1656
- HOST_DISCOVERY_REQUEST 1656
- HOST_DISCOVERY_REQUESTS 1657
- HYPER_V_VIRTUAL_MACHINE 1657
- TABLE 186 IFL 1658
- TABLE 187 IFL_CONNECTION 1658
- TABLE 188 INTERFACE 1659
- TABLE 190 IP_DEVICE_LICENSE 1660
- TABLE 191 IP_INTERFACE 1661
- TABLE 192 IP_PORT_GROUP 1661
- TABLE 193 IP_ROUTE 1661
- TABLE 194 IP_SUBNET_VLAN 1662
- TABLE 195 IPX_NETWORK_VLAN 1662
- TABLE 196 ISL 1662
- • 0 denotes untrusted 1663
- • 1 denotes trusted 1663
- • 0 denotes present 1663
- TABLE 198 ISL_TRUNK_GROUP 1664
- TABLE 197 ISL_CONNECTION 1664
- TABLE 199 ISL_TRUNK_MEMBER 1665
- TABLE 200 KEY_VAULT 1665
- • 0 = Standard 1666
- • 1= Extended 1666
- • 1 = Clear stats is enabled 1666
- TABLE 205 L2_NEIGHBOR 1667
- TABLE 208 LAG 1668
- TABLE 209 LAG_MEMBER 1669
- TABLE 208 LAG (Continued) 1669
- TABLE 212 LICENSE 1670
- TABLE 214 LICENSE_FEATURE_MAP 1671
- TABLE 215 LICENSE_RULE 1671
- TABLE 216 LICENSED_FEATURE 1671
- TABLE 217 LINK 1672
- TABLE 218 LOCK 1672
- TABLE 219 LSAN_DEVICE 1672
- TABLE 220 LSAN_TAG_CONFIG 1672
- TABLE 221 LSAN_PROXY_DEVICE 1673
- TABLE 222 LSAN_ZONE 1673
- TABLE 223 LSAN_ZONE_DB_CONFIG 1673
- TABLE 224 LSAN_ZONE_MEMBER 1673
- TABLE 225 MCT_CLIENT 1673
- • Deployed(0) 1674
- • Undeployed(1) 1674
- TABLE 229 MAC_GROUP 1675
- TABLE 230 MAC_GROUP_MEMBER 1675
- TABLE 231 MANAGED_ELEMENT 1675
- TABLE 232 MAPS_EVENT 1676
- TABLE 233 MAPS_EVENT_DETAILS 1676
- TABLE 235 MAPS_POLICY 1677
- TABLE 236 MARCHING_ANTS 1677
- TABLE 237 MEASURE 1677
- TABLE 238 MESSAGE_RECIPIENT 1678
- TABLE 239 MIGRATION_HISTORY 1678
- TABLE 237 MEASURE (Continued) 1678
- TABLE 240 MODULE 1679
- TABLE 241 MODULE_SLOT_PRESENT 1680
- TABLE 242 MPLS_ADMIN_GROUP 1680
- TABLE 240 MODULE (Continued) 1680
- TABLE 244 MPLS_LSP 1681
- TABLE 245 MPLS_PATH 1681
- TABLE 246 MPLS_PATH_HOP 1681
- TABLE 247 MPLS_RSVP_LSP 1682
- MPLS_RSVP_LSP_ADMIN_GROUP 1683
- MPLS_RSVP_LSP_FRR_PARAMETERS 1683
- TABLE 253 MPLS_RSVP_LSP_PATH 1684
- TABLE 255 MPLS_SERVICE 1685
- MPLS_SERVICE_PEER_RELATION 1686
- TABLE 259 MRP_RING 1687
- TABLE 260 MRP_RING_DEVICE 1687
- TABLE 261 N2F_PORT_MAP 1688
- TABLE 262 NETWORK_VLAN 1688
- TABLE 263 NETWORK_SCOPE_TYPE 1689
- TABLE 264 NIC_PROFILE 1689
- TABLE 265 NPORT_WWN_MAP 1689
- TABLE 266 NP_FLOW_DEFINITION 1689
- TABLE 267 NP_SUB_FLOW 1690
- TABLE 269 OUI_VENDOR 1691
- • device level collector is 0 1692
- • port level collector is 1 1692
- TABLE 273 PBR_NEXT_HOP 1693
- TABLE 274 PBR_POLICY 1693
- TABLE 275 PBR_RULE 1693
- TABLE 276 PBR_RULE_ACL_LIST 1693
- TABLE 277 PHANTOM_PORT 1694
- TABLE 278 PHYSICAL_DEVICE 1694
- TABLE 279 PHYSICAL_INTERFACE 1695
- TABLE 280 PHYSICAL_PORT 1696
- TABLE 284 PM_DASHBOARD_WIDGET 1697
- TABLE 285 PM_DATA_COLLECTOR 1698
- TABLE 286 PM_MEASURE 1699
- • 0 = product level 1701
- • 1 = port level 1701
- • 0 = disabled 1701
- • 1 = enabled 1701
- TABLE 296 POE_THRESHOLD_EVENT 1702
- TABLE 297 POLICY_RULE 1702
- TABLE 298 POLICY_RULE_MAP 1702
- PORT_BOTTLENECK_CONFIG 1703
- PORT_BOTTLENECK_STATUS 1703
- PORT_COMMISSION_CIMOM_SERVER 1703
- TABLE 302 PORT_FENCING_POLICY 1704
- TABLE 304 PORT_PROFILE 1705
- TABLE 305 PORT_PROFILE_DOMAIN 1705
- PORT_PROFILE_QOS_PFC_MAP 1707
- PORT_PROFILE_VLAN_MAP 1707
- PORT_PROFILE_QOS_MAP 1707
- • 0 = Disabled 1708
- • 1 = Enabled 1708
- TABLE 313 PRIVILEGE 1709
- TABLE 314 PRODUCT_APP 1709
- TABLE 315 PROTOCOL_VLAN 1710
- TABLE 316 QRTZ_BLOB_TRIGGERS 1710
- TABLE 317 QRTZ_CALENDARS 1710
- TABLE 318 QRTZ_CRON_TRIGGERS 1710
- TABLE 319 QRTZ_FIRED_TRIGGERS 1710
- TABLE 320 QRTZ_JOB_DETAILS 1711
- TABLE 321 QRTZ_JOB_LISTENERS 1711
- TABLE 322 QRTZ_LOCKS 1711
- QRTZ_PAUSED_TRIGGER_GRPS 1712
- QRTZ_SCHEDULER_STATE 1712
- QRTZ_SIMPLE_TRIGGERS 1712
- QRTZ_SIMPROP_TRIGGERS 1712
- TABLE 328 QRTZ_TRIGGERS 1713
- TABLE 331 RAS_LOG 1714
- TABLE 332 RECIPIENT_TYPE 1714
- TABLE 334 REPORT_TYPE 1714
- TABLE 335 REPORT_TEMPLATE 1715
- • 0= Not Hidden 1716
- • 1= Hidden 1716
- TABLE 344 RULE_CONDITION_MAP 1717
- TABLE 346 SAN 1717
- TABLE 347 SAN_CONNECTION 1717
- TABLE 348 SCOM_HOST 1718
- TABLE 349 SECURITY_POLICY 1718
- TABLE 351 SENSOR 1719
- TABLE 352 SFLOW_CHECKPOINT 1720
- TABLE 353 SFLOW_HOUR_SUMMARY 1720
- TABLE 351 SENSOR (Continued) 1720
- • 0 means its edge port 1722
- • 1 means its trill port 1722
- TABLE 358 SFLOW_MINUTE_MAC 1723
- TABLE 361 SFLOW_MINUTE_VLAN 1724
- • 1 means its fabric port 1725
- SFLOW_STAGING (Continued) 1726
- TABLE 366 SFLOW_STAGING_SLNUM 1727
- TABLE 367 SMART_CARD 1727
- • 1-Pre snapshot 1728
- • 2-Post snapshot 1728
- TABLE 371 SNMP_DATA 1729
- TABLE 372 SNMP_DATA_1DAY 1730
- TABLE 373 SNMP_DATA_2HOUR 1730
- TABLE 374 SNMP_DATA_30MIN 1731
- TABLE 375 SNMP_EXPR_DATA 1731
- TABLE 378 SNMP_EXPRESSION 1732
- TABLE 379 SNMP_PROFILE 1732
- SNMP_PROFILE (Continued) 1733
- TABLE 383 SSL_CERTIFICATE 1734
- TABLE 385 SSL_KEY 1735
- TABLE 386 SSL_KEY_PASSWORD 1736
- TABLE 387 STATS_AGING 1736
- TABLE 388 STP_PORT 1736
- TABLE 385 SSL_KEY (Continued) 1736
- TABLE 389 STP_INSTANCE 1737
- • 0 - Disabled 1738
- • 1 - Enabled 1738
- • CEE_RUNNING=1 1739
- • CEE_STARTUP=2 1739
- • INVALID=-1 1739
- TABLE 393 SWITCH_LICENSE 1740
- TABLE 394 SWITCH_MODEL 1740
- TABLE 395 SWITCH_PORT 1741
- SWITCH_PORT (Continued) 1742
- SWITCH_PORT_PERFORMANCE 1745
- TABLE 399 SYSTEM_PROPERTY 1746
- TABLE 400 TARGET_TYPE 1747
- TABLE 401 THIRD_PARTY_DEVICE 1747
- TABLE 402 THRESHOLD_MEASURE 1747
- TABLE 403 THRESHOLD_POLICY 1747
- TABLE 404 TIME_SERIES_DATA 1747
- TIME_SERIES_DATA_1DAY 1748
- TIME_SERIES_DATA_2HOUR 1748
- TIME_SERIES_DATA (Continued) 1748
- TABLE 408 TIME_SERIES_DATA_1 1749
- TIME_SERIES_DATA_1_1DAY 1750
- TIME_SERIES_DATA_1_2HOUR 1750
- TABLE 412 TIME_SERIES_DATA_2 1751
- TIME_SERIES_DATA_2_1DAY 1752
- TIME_SERIES_DATA_2_2HOUR 1753
- TIME_SERIES_DATA_2_30MIN 1753
- TABLE 416 TIME_SERIES_DATA_3 1754
- TIME_SERIES_DATA_3_2HOUR 1755
- TIME_SERIES_DATA_3_30MIN 1755
- TABLE 420 TIME_SERIES_DATA_4 1756
- TIME_SERIES_DATA_4_1DAY 1757
- TIME_SERIES_DATA_4_2HOUR 1757
- TABLE 424 TIME_SERIES_DATA_5 1758
- TIME_SERIES_DATA_5_30MIN 1759
- TABLE 426 TOOL_APP 1760
- TABLE 427 TOOL_PATH 1760
- TABLE 428 TOPO_MAP_IMAGE 1760
- TABLE 429 TRILL 1760
- TABLE 430 TRILL_TRUNK_GROUP 1761
- TABLE 431 TRILL_TRUNK_MEMBER 1761
- TABLE 433 TRUNK_GROUP_MEMBER 1761
- • 0=Disabled 1762
- • 1=Enabled 1762
- USER_DEFINED_DEVICE_DETAIL 1763
- USERDEFINED_NETWORK_SCOPE 1763
- TABLE 439 USER_PREFERENCE 1764
- TABLE 442 USER_RESOURCE_MAP 1764
- TABLE 443 USER_ROLE_MAP 1764
- TABLE 444 USER_STATE_MAP 1765
- TABLE 445 V_PORT_DETAIL 1765
- TABLE 446 VCN_ICL 1765
- TABLE 447 VCN_MEMBER 1765
- • Disabled(0) 1766
- • Enabled(1) 1766
- TABLE 450 VCEM_PROFILE 1767
- TABLE 451 VIP_SERVER 1767
- TABLE 452 VIP_SERVER_BINDING 1768
- TABLE 454 VIRTUAL_FCOE_PORT 1768
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1769
- VIRTUAL_FCOE_PORT_STAT 1769
- VIRTUAL_FCOE_PORT (Continued) 1769
- • 1-Enabled 1770
- • 0-disabled 1770
- VIRTUAL_SWITCH (Continued) 1771
- TABLE 472 VMOTION_EVENT 1777
- TABLE 474 VM_DATA_CENTER 1778
- TABLE 476 VM_DV_PORT 1779
- TABLE 477 VM_DV_PORT_GROUP 1780
- TABLE 478 VM_DV_SWITCH 1781
- TABLE 480 VM_FC_HBA 1782
- • Fabric 1783
- • Point to point 1783
- • Unknown 1783
- VM_HOST_END_DEV_CONNECTIVITY 1784
- VM_HOST_PROXY_SWITCH 1784
- VM_HOST (Continued) 1784
- TABLE 486 VM_HOST_VIRTUAL_NIC 1785
- TABLE 487 VM_NETWORK_SETTINGS 1786
- TABLE 489 VM_PATH 1787
- TABLE 490 VM_PHYSICAL_NIC 1788
- TABLE 489 VM_PATH (Continued) 1788
- TABLE 491 VM_SECURITY_POLICY 1789
- • VMKernel 1790
- • Service Console 1790
- TABLE 495 VM_STORAGE 1791
- TABLE 498 VM_VCENTER 1792
- TABLE 499 VM_VCENTER_MEMBER 1793
- TABLE 501 VM_VIRTUAL_MACHINE 1795
- VPLS_DEVICE_RELATION 1796
- VPLS_ENDPOINT_RELATION 1796
- TABLE 505 VR_CONN_DOMAIN 1797
- TABLE 508 VR_CONN_MODULE 1798
- TABLE 509 VR_CONN_MODULE_PORT 1798
- TABLE 511 VR_CONN_WWN 1799
- TABLE 514 WT_ARCHIVE 1800
- TABLE 515 ZONE 1800
- TABLE 516 ZONE_ALIAS 1801
- TABLE 517 ZONE_ALIAS_IN_ZONE 1801
- TABLE 518 ZONE_ALIAS_MEMBER 1801
- TABLE 519 ZONE_DB 1801
- TABLE 520 ZONE_DB_CONFIG 1802
- TABLE 521 ZONE_DB_CONTENT 1802
- TABLE 522 ZONE_DB_USERS 1802
- TABLE 523 ZONE_IN-ZONE_SET 1802
- TABLE 524 ZONE_MEMBER 1802
- ADAPTER_PORT_CONFIG_INFO 1803
- AG_CONNECTION_INFO 1803
- BIRTREPORT_SCHEDULE_INFO 1804
- BOOT_IMAGE_FILE_DETAILS_INFO 1805
- CNA_ETH_PORT_CONFIG_INFO 1805
- CNA_PORT_DETAILS_INFO 1806
- CNA_PORT_INFO 1806
- CORE_SWITCH_DETAILS_INFO 1807
- CRYPTO_HOST_LUN_INFO 1808
- CRYPTO_TARGET_ENGINE_INFO 1809
- DASHBOARD_PREFERENCES_INFO 1809
- DEPLOYMENT_INFO 1810
- DEPLOYMENT_LOG 1811
- DEVICE_CONNECTION_INFO 1811
- EE_MONITOR_STATS_5MIN_INFO 1812
- EE_MONITOR_STATS_30MIN_INFO 1812
- EE_MONITOR_STATS_2HOUR_INFO 1812
- EE_MONITOR_STATS_1DAY_INFO 1813
- TE_PORT_STATS_5MIN_INFO 1813
- TE_PORT_STATS_30MIN_INFO 1814
- TE_PORT_STATS_2HOUR_INFO 1814
- TE_PORT_STATS_1DAY_INFO 1814
- SWITCH_INFO 1815
- SWITCH_REPORT_INFO 1817
- DEVICE_INFO 1819
- N2F_PORT_MAP_INFO 1820
- DEVICE_NODE_INFO 1821
- DEVICE_PORT_INFO 1822
- DEVICE_REPORT_INFO 1823
- DEV_PORT_GIGE_PORT_LINK_INFO 1824
- DEV_PORT_MAC_ADDR_MAP_INFO 1824
- ISL_CONNECTION_INFO 1825
- ISL_INFO 1825
- ETHERNET_ISL_INFO 1826
- EVENT_DETAILS_INFO 1827
- EVENT_INFO 1828
- FABRIC_INFO 1829
- FCIP_TUNNEL_CIRCUIT_INFO 1830
- FCIP_TUNNEL_INFO 1831
- FCOE_DEVICE_INFO 1832
- FRU_INFO 1832
- GIGE_PORT_ECLOUD_LINK_INFO 1833
- GIGE_PORT_INFO 1833
- GENERATED_BIRTREPORT_INFO 1834
- HBA_PORT_DETAILS_INFO 1835
- HBA_TARGET_INFO 1837
- HEALTH_STATUS_INFO 1838
- HOST_INVENTORY_REPORT_INFO 1839
- HOST_DISCOVERY_REQUEST_INFO 1842
- HOST_DISCOVERY_REQUESTS_INFO 1843
- IFL_INFO 1845
- IFL_REPORT_INFO 1845
- ISL_REPORT_INFO 1849
- ISL_TRILL_INFO 1851
- ISL_TRUNK_GROUP_MEMBER_INFO 1852
- ISL_TRUNK_INFO 1853
- L2_NEIGHBOR_INFO 1853
- MAPS_EVENT_DETAILS_INFO 1854
- N2F_PORT_MAP_REPORT_INFO 1855
- MODULE_INFO 1858
- NPORT_WWN_MAP_INFO 1860
- PHANTOM_PORT_INFO 1860
- PRODUCT_INFO 1861
- PORT_BOTTLENECK_CONF_INFO 1863
- PORT_BOTTLENECK_STAT_INFO 1863
- PORT_GROUP_INFO 1864
- ROLE_PRIVILEGE_INFO 1864
- PORT_PROFILE_INFO 1865
- PORT_PROFILE_INTERFACE_INFO 1865
- PORT_PROFILE_MAC_INFO 1866
- PORT_VLAN_INFO 1866
- PROTOCOL_VLAN_INFO 1867
- SFLOW_MINUTE_L3_VIEW 1867
- SFLOW_MINUTE_MAC_VIEW 1867
- SCOM_EE_MONITOR_INFO 1868
- SENSOR_INFO 1868
- SMART_CARD_USAGE_INFO 1869
- SWITCH_CONFIG_INFO 1870
- SWITCH_PORT_DETAILS_INFO 1871
- SWITCH_DETAILS_INFO 1876
- SWITCH_DISCOVERED_MAC_INFO 1878
- SWITCH_PORT_INFO 1878
- SWITCH_SNMP_INFO 1880
- TIME_SERIES_DATA_INFO 1882
- TIME_SERIES_DATA_VIEW 1883
- TRILL_INFO 1884
- TRILL_TRUNK_INFO 1885
- USER_ROLE_RESOURCE_INFO 1885
- VIRTUAL_FCOE_PORT_INFO 1886
- VIRTUAL_PORT_WWN_DETAILS_INFO 1886
- VM_ADDRESS_INFO 1887
- VLAN_INT_CLASSIFIER_INFO 1888
- VM_CONNECTIVITY_INFO 1888
- VM_NETWORK_CONNECTIVITY_INFO 1891
- VM_DATASTORE_DETAILS_INFO 1893
- VM_EE_MONITOR_INFO 1893
- VM_HOST_INFO 1894
- VM_LUN_INFO 1895
- VM_STATISTICS_INFO 1895
- VR_CONN_MODULE_INFO 1897
- VR_CONN_MODULE_PORT_INFO 1899
- VR_CONN_NPIV_INFO 1900
- VMM_DISCOVERED_MAC_INFO 1901
- ZONE_DB_INFO 1902
- ZONE_DB_REPORT_INFO 1903
- AP_USAGE 1903
- SFLOW_MINUTE_BGP_VIEW 1903
- SFLOW_MINUTE_VLAN_VIEW 1904
- PHYSICAL_DEVICE_INFO 1904
- SLOT_INFO 1904
- MANAGED_ELEMENT_INFO 1905
- SNMP_DATA_INFO 1905
- SNMP_EXPR_DATA_INFO 1905
- SNMP_DATA_VIEW 1905
- VM_VNETWORK_INFO 1908
- VCS_CLUSTER_MEMBER_INFO 1909
- RESET_VCS_LICENSED 1910
- WIRELESS_INTERFACE 1910
- WIRED_INTERFACE 1911
- CEE_PORT_INFO 1913
- Brocade International, 457 1916
- EMC, 462 1916
- HP LAN, 463 1916
- IBM, 457 1916
Relacionado con productos y manuales para Software Brocade Network Advisor IP User Manual v12.3.0
(238 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales