Brocade Network Advisor IP User Manual v12.3.0 Manual de usuario Pagina 163
- Pagina / 192
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Network Advisor IP User Manual 109
53-1003153-01
VM Manager discovery
3
VM Manager discovery requirements
• Discovery of a vCenter server (refer to “Discovering a VM manager” on page 109, step 4 and
step 5), requires a vCenter user with read-only or read-write privilege on the vCenter server
node and all objects in the inventory below the vCenter server.
• Enabling the vSphere client plug-in registration (refer to “Discovering a VM manager” on
page 109, step 6), requires a vCenter user with, at minimum, the following read-write privileges
on the vCenter server node and all objects in the inventory below the vCenter server:
- Extension > Register extension
- Extension > Unregister extension
- Extension > Update extension
Discovering a VM manager
Before you discover a VM Manager, make sure you meet the discovery requirements (refer to “VM
Manager discovery requirements” on page 109).
To discover a VM manager, complete the following steps.
1. Select Discover > VM Managers.
The Discover VM Managers dialog box displays.
FIGURE 51 Discover VM Managers dialog box
2. Click Add.
The Add VM Manager dialog box displays.
- Brocade Network Advisor 1
- Document History 2
- Contents 5
- Chapter 2 Patches 6
- Chapter 3 Discovery 6
- Chapter 4 Management Groups 7
- Chapter 7 Web Client 10
- Chapter 9 View Management 12
- Chapter 10 MRP Topology 13
- Chapter 11 Call Home 13
- Chapter 12 Third-party tools 14
- Chapter 15 VCS Management 16
- Chapter 16 Host Management 17
- Chapter 18 Telemetry 19
- Chapter 20 Zoning 20
- Chapter 21 Port Fencing 22
- Chapter 22 FICON Environments 22
- Chapter 23 IP Element Manager 23
- Chapter 28 VLAN Management 25
- Chapter 29 MPLS Management 26
- Chapter 30 VIP Servers 27
- Chapter 33 Deployment Manager 28
- Chapter 34 Performance Data 28
- Chapter 35 Frame Monitor 30
- Chapter 36 Power Center 30
- Chapter 37 Policy Monitor 30
- Chapter 38 Fault Management 31
- Chapter 40 Technical Support 33
- Chapter 41 Reports 33
- Appendix A Application menus 34
- Appendix C Event Categories 34
- Appendix D User Privileges 34
- Appendix E Device Properties 35
- Appendix G CLI Templates 35
- Appendix H Troubleshooting 35
- Appendix I Database Fields 35
- About This Document 39
- What’s new in this document 47
- Document conventions 50
- Notice to the reader 51
- Additional information 51
- Getting technical help 52
- Document feedback 52
- Getting Started 55
- FIGURE 1 Main window 56
- Management server and client 57
- Launching a remote client 58
- Logging into the web client 59
- • Server IP 60
- • Server Ports 60
- Viewing active sessions 64
- Disconnecting users 64
- Viewing server properties 65
- Viewing port status 66
- Server and client ports 67
- Keyboard shortcuts 71
- Look and feel customization 72
- Changing the font size 73
- Product improvement 74
- Data transfer 75
- PostgreSQL database 76
- > ./edb_psqlodbc.bin 78
- Installing a patch 85
- Uninstalling a patch 86
- Discovery 89
- IP discovery overview 90
- • Lazy polling 91
- Configuration requirements 92
- Discovery of IPv6 addresses 92
- VDX/VCS discovery 95
- # DeviceWWNToIPMap.txt 96
- In-band IP address 96
- Standalone discovery 97
- VCS fabric discovery 97
- VCS fabric rediscovery 97
- Seed switch failover 98
- VCS fabric split and merge 98
- 53-1003153-01 100
- HyperEdge stack discovery 102
- IP SNMP credentials 104
- Adding SNMPv3 credentials 105
- FIGURE 14 SNMPv3 credentials 106
- Editing SNMPv3 credentials 108
- Default IP user credentials 110
- FIGURE 15 Default Passwords 111
- FIGURE 18 Enable Super User 112
- IP Object identifier filters 116
- Excluding product types 117
- FIGURE 20 Preferences tab 118
- IP discovery profiles 121
- FIGURE 21 Profile tab 122
- Configuring address ranges 124
- Adding CIDR subnet addresses 125
- Adding subnet addresses 125
- Adding IP addresses 126
- Excluding subnet addresses 127
- Excluding IP addresses 127
- Editing address ranges 128
- Scheduling discovery 129
- Editing a discovery schedule 134
- FIGURE 35 Preferences tab 136
- Deleting a discovery profile 137
- Starting discovery manually 138
- Stopping discovery 139
- Viewing discovery status 139
- Viewing discovery reports 139
- E-mailing discovery reports 140
- Exporting discovery reports 140
- Viewing the discovery log 141
- FIGURE 37 SNMPv3 credentials 143
- • CBC-DES 144
- • CFB_AES-128 144
- Editing IP device discovery 145
- • HMAC_MD5 146
- • HMAC_SHA 146
- FIGURE 41 SNMPv1/v2c settings 148
- Host discovery 151
- Importing Hosts from a fabric 155
- VM Manager discovery 162
- Discovering a VM manager 163
- Editing a VM manager 164
- Device_IP_Address 167
- IP Rediscovery 168
- Rediscovering a group 169
- Management Groups 171
- Product group overview 172
- Static product groups 173
- Dynamic product groups 175
- Viewing test results 180
- Deleting a product group 181
- Port Groups 182
- Editing a port group 183
- Duplicating a port group 183
- Viewing port group properties 184
- • Enable 185
- • Disable 185
- Deleting a port group 186
- Application Configuration 187
- Server Data backup 188
- What is backed up? 189
- Management server backup 189
- Configuring backup 189
- Enabling backup 191
- Disabling backup 192
- Viewing the backup status 192
- Changing the backup interval 192
- Starting immediate backup 193
- Reviewing backup events 193
- Server Data restore 194
- SAN data collection 195
- Event storage settings 199
- Flyover settings 200
- • Display Name 201
- • IP Address 201
- • Status 201
- Turning flyovers on or off 202
- Viewing flyovers 202
- Name settings 203
- Viewing names 204
- Adding a name to a new device 207
- Removing a name from a device 207
- Editing names 208
- Exporting names 208
- Importing Names 208
- Device Character limit 209
- Searching for a device by WWN 210
- Configuring the server name 210
- Configuring login security 211
- Syslog Registration settings 212
- Software Configuration 215
- Client/Server IP 216
- • Select All. Go to step 4 217
- IP preferences 220
- Configuring SNMP preferences 226
- Configuring TFTP preferences 226
- Memory allocation settings 227
- Configuring asset polling 229
- Configuring SAN communication 230
- Configuring IP communication 232
- FTP/SCP/SFTP server settings 233
- Server port settings 238
- Support mode settings 239
- FIPS Support 241
- User Account Management 243
- User accounts 247
- Editing a user account 249
- Copying a user account 249
- Exporting a user account 250
- Importing a user account 251
- Disabling a user account 252
- Enabling a user account 252
- Deleting a user account 253
- Unlocking a user account 253
- Creating a new role 253
- Editing a role 254
- Copying a role 255
- Deleting a role 255
- Adding privileges to a role 255
- Areas of responsibility 257
- Editing an AOR 258
- Copying an AOR 259
- Deleting an AOR 259
- Assigning products to an AOR 259
- Password policies 261
- User profiles 264
- Editing your user profile 265
- Changing your password 266
- Viewing your password policy 266
- Resetting optional messages 267
- Configuring CLI credentials 268
- Web Client 271
- Dashboard 272
- Dashboard toolbar 274
- General dashboard functions 274
- Dashboard customization 275
- • Any user-defined group 276
- • All products and fabrics 276
- • Any Ethernet fabric 276
- • Any system-defined group 276
- Setting the time interval 277
- Default dashboards 277
- Status widgets 279
- Access Point Status widget 280
- on page 223Events widget 280
- Host Adapter Inventory widget 281
- IP Inventory widget 283
- IP Status widget 284
- Status widget 285
- Fabric Watch widgets 286
- Port Health Violations widget 288
- Performance monitors 289
- Top Port C3 Discards monitor 291
- Top Port CRC Errors monitor 293
- Top Port Discards monitor 294
- Top Port Errors monitor 296
- Top Port Receive EOF monitor 298
- Top Port Sync Losses monitor 300
- Top Port Traffic monitor 303
- Inventory 316
- Fabric summary view 317
- FIGURE 105 Fabric summary 318
- FIGURE 106 Fabric Page area 318
- FIGURE 108 Host Details table 319
- FIGURE 110 Events table 320
- Viewing fabric properties 322
- Product summary view 323
- FIGURE 115 Port Details area 324
- FIGURE 116 Violations table 326
- FIGURE 117 Events table 326
- Viewing product properties 329
- Port summary view 330
- FIGURE 120 Port summary 331
- FIGURE 121 Violations table 332
- FIGURE 123 Events page 334
- Table functions 335
- Reports toolbar 336
- General report page functions 337
- Generating a report 337
- Generated reports 339
- Report schedules 340
- Configuring a new schedule 341
- E-mailing reports 345
- Editing a schedule 345
- Activating a schedule 346
- Deactivating a schedule 346
- Report templates 347
- Exporting report templates 348
- Importing report templates 349
- Sharing report templates 349
- Default reports 350
- Fabric Ports report 354
- Switch Report 357
- Zone Summary reports 359
- Dashboard Management 365
- FIGURE 136 Dashboard tab 366
- Dashboard messages 368
- Dashboard Privileges 369
- Accessing a dashboard 370
- Filtering the dashboards list 370
- Setting the dashboard display 373
- • Type — The type of monitor 374
- Setting the network scope 376
- Setting the time scope 379
- Dashboard playback 380
- Events widget 384
- Color Severity 385
- Monitor types 423
- Measures 423
- TABLE 33 Port measures types 427
- Wireless 437
- View Management 439
- IP main toolbar 441
- Product List toolbar 441
- Host Product List toolbar 443
- Topology Map toolbar 443
- Host topology map toolbar 444
- IP Product List 444
- Topology Map 445
- Topology Map functions 446
- Master Log 447
- FIGURE 180 IP Minimap 448
- Status bar 449
- Icon legend 450
- IP product icons 451
- Host product icons 451
- IP group icons 452
- IP port icons 452
- IP product status icons 452
- Customizing the main window 453
- Exporting the topology 454
- Displaying columns 455
- Changing the order of columns 455
- Resizing the columns 456
- Sorting table information 456
- Copying table information 456
- Exporting table information 456
- Product List customization 457
- Adding a property label 458
- Editing a property label 458
- Deleting a property label 459
- Searching for a device 460
- Restricting a search by node 460
- Address Finder 461
- Finding IP addresses 462
- Finding MAC addresses 464
- IP topology view manager 467
- Network Objects view 468
- IP Topology view 470
- L2 Topology view 470
- Ethernet Fabrics view 471
- VLAN Topology view 471
- STP/RSTP topology 472
- Generating an STP/RSTP Report 473
- Exporting an STP/RSTP Report 473
- Host Topology view 474
- IP topology map components 476
- TABLE 42 Legend components 477
- Topology map layout 478
- Orthogonal 479
- Orthogonal (Merge Lines) 480
- Hierarchical 480
- Circular 481
- Free Form 481
- Creating a customized layout 482
- Customizing the Topology Map 484
- Printing a map 487
- Port actions 488
- Disabling port actions 489
- MRP Topology 491
- Viewing a MRP Topology map 492
- Viewing a MRP ring 493
- TABLE 44 494
- • Organic 496
- • Hierarchical 496
- • Self Organizing 497
- • Circular 497
- Refreshing MRP Topology data 500
- Viewing MRP properties 500
- Call Home 503
- overview 503
- System requirements 505
- Showing a Call Home center 508
- Hiding a Call Home center 508
- Editing a Call Home center 509
- Enabling a Call Home center 516
- Enabling supportSave 516
- Disabling a Call Home center 517
- Viewing Call Home status 518
- Defining an event filter 520
- Third-party tools 525
- Launching a Telnet session 526
- Launching an Element Manager 526
- Launching HCM Agent 527
- Adding a tool 527
- Server Management Console 535
- Services tab 536
- Refreshing the server status 537
- Stopping all services 537
- Stopping the CIMOM services 537
- Starting all services 538
- Restarting all services 538
- Ports tab 539
- AAA Settings tab 540
- Configuring a Radius server 541
- Configuring an LDAP server 545
- Configuring a TACACS+ server 547
- Radius server configuration 552
- LDAP server configuration 554
- Loading an AD group 558
- Restore tab 560
- HCM Upgrade tab 562
- SMI Agent Configuration Tool 562
- FIGURE 207 Log In dialog box 563
- SLP on UNIX systems 567
- SLP on Windows systems 568
- Home tab 569
- Authentication tab 570
- CIMOM tab 572
- Configuring the CIMOM log 574
- Certificate Management tab 575
- Viewing a certificate 576
- Exporting a certificate 576
- Summary tab 577
- FIGURE 212 Summary tab 578
- “Managed count” on page 35 579
- Wireless Management 581
- Wireless devices 582
- Wireless device discovery 583
- Port groups 583
- View management 584
- Wireless device properties 584
- Element Manager 585
- CLI configuration management 587
- Cluster mode 588
- VLAN management 588
- Performance management 589
- Policy Monitors 589
- Fault management 589
- Detailed AP Products report 591
- VCS Management 593
- VCS mode types 594
- Network OS 599
- VCS product groups 600
- Port profiles 600
- AMPP characteristics 601
- Life of a port profile 601
- AMPP events and behavior 602
- Management application 603
- • “Comparing port profiles” 604
- • “Deploying port profiles” 604
- Comparing port profiles 605
- Deploying port profiles 608
- FRU monitoring 609
- System thresholds 610
- Alert notifications 610
- Resource monitoring 610
- SFP parameter monitoring 611
- Security monitoring 611
- Port statistics monitoring 611
- Ethernet fabric traceroute 612
- Ethernet_Fabric 616
- Exporting diagnostic data 617
- Host Management 619
- Supported adapters 620
- Converged Network Adapters 621
- Fabric Adapters 621
- technology 621
- HCM software 622
- HCM features 623
- Host adapter discovery 624
- VM Manager 624
- Editing a VM Manager 625
- Deleting a VM Manager 625
- ESXi CIM listener ports 625
- Adapter software 627
- Driver repository 628
- Boot image repository 629
- Bulk port configuration 632
- Adding a port configuration 633
- Editing a port configuration 636
- Deleting a port configuration 636
- FAWWNs on attached AG ports 639
- Adding AG port FAWWNs 640
- Deleting AG port FAWWNs 640
- Role-based access control 641
- Host performance management 642
- Host security authentication 643
- Host fault management 645
- Backup support 646
- Fibre Channel over Ethernet 649
- Enhanced Ethernet features 650
- FCoE protocols supported 651
- FCoE licensing 652
- Saving running configurations 652
- DCB configuration management 654
- Switch policies 655
- DCB configuration 656
- Configuring LLDP 659
- Adding a LAG 661
- FIGURE 243 Add LAG dialog box 662
- Editing a DCB switch 664
- Editing a DCB port 665
- Editing a LAG 666
- Enabling a DCB port or LAG 668
- QoS configuration 669
- Creating a DCB map 670
- Editing a DCB map 672
- Deleting a DCB map 672
- Creating a Traffic Class map 674
- Editing a Traffic Class map 675
- Deleting a Traffic Class map 675
- FCoE provisioning 677
- VLAN classifier configuration 679
- • ARP — 0x0808 680
- • IP — 0x8881 680
- • IPv6 — 0x86DD 680
- LLDP-DCBX configuration 683
- Adding an LLDP profile 684
- Editing an LLDP profile 685
- Deleting an LLDP profile 685
- 802.1x authentication 686
- FIGURE 251 802.1x dialog box 688
- Deploy to Ports dialog box 690
- Deploy to LAGs dialog box 690
- • LLDP Profiles 692
- Supported VCS platforms 694
- Viewing switches in VCS mode 694
- Viewing ports in VCS mode 697
- QoS - Non-DCB 699
- Viewing LAGs in VCS mode 701
- DCB performance 705
- Historical performance graph 707
- Historical performance report 707
- FCoE login groups 708
- Adding an FCoE login group 709
- Editing an FCoE login group 710
- • “FCoE login groups” 712
- Viewing virtual FCoE ports 713
- Clearing a stale entry 714
- Telemetry 717
- Viewing existing PBR policies 718
- Adding a new policy 720
- Adding rules to a policy 720
- • ACL Name — Name of the ACL 721
- Editing a policy 722
- Editing a rule 722
- Deleting a policy or rule 723
- ACL Accounting 728
- Viewing ACL counters 729
- Security Management 731
- Device_Name 732
- • Any — Any of the protocols 734
- Port_Number 737
- Fabric_Name 748
- FIGURE 273 751
- Clearing L3 ACL assignments 767
- Configuring hit statistics 768
- Network configuration 773
- Creating a network 774
- Editing a network 775
- Copying a network 776
- Deleting a network 776
- Network group configuration 777
- Creating a network group 778
- Editing a network group 779
- Copying a network group 780
- Service configuration 782
- Viewing existing services 783
- Creating a service 784
- Editing a service 785
- Copying a service 785
- Deleting a service 786
- Service group configuration 787
- Creating a service group 788
- Editing a service group 789
- Copying a service group 790
- Deleting a service group 791
- • = (equal to) 794
- • != (not equal to) 794
- • > (greater than) 794
- • < (less than) 794
- Editing a MAC filter 795
- Copying a MAC filter 796
- Deleting a MAC filter 798
- Assigning MAC filters 798
- Zoning overview 807
- Online zoning 808
- Offline zoning 809
- Zoning naming conventions 809
- Zone database size 810
- Zoning configuration 810
- Creating a zone 811
- Viewing zone properties 811
- Adding members to a zone 812
- Creating a member in a zone 813
- Removing a member from a zone 813
- Renaming a zone 814
- Deleting a zone 815
- Duplicating a zone 815
- Creating a zone alias 817
- Editing a zone alias 817
- Exporting zone aliases 819
- Renaming a zone alias 819
- Deleting a zone alias 819
- Duplicating a zone alias 820
- Creating a zone configuration 820
- Renaming a zone configuration 824
- Refreshing a zone database 827
- Merging fabrics 827
- Merging two zone databases 828
- Zoning administration 831
- Comparing zone databases 832
- Listing zone members 837
- Listing un-zoned members 837
- Removing an offline device 838
- Replacing zone members 838
- Port Fencing 841
- Thresholds 844
- C3 Discard Frames threshold 845
- Invalid CRCs threshold 846
- Invalid words threshold 846
- Link Reset threshold 846
- Protocol error threshold 846
- State Change threshold 846
- Adding thresholds 847
- Adding a Link Reset threshold 851
- Assigning thresholds 855
- Unblocking a port 855
- Editing thresholds 856
- Finding assigned thresholds 860
- Viewing thresholds 860
- Removing thresholds 861
- FICON Environments 863
- Planning the configuration 864
- Configuring the switch 866
- FIGURE 314 Firmware download 868
- Configuring FICON display 870
- Changing window arrangement 877
- Clearing port names 877
- Cascaded FICON fabric 878
- Enabling DLS 880
- Cascaded FICON fabric merge 881
- Resolving merge conflicts 885
- Viewing port groups 887
- Swapping blades 889
- IP Element Manager 891
- Switch properties 894
- Properties dialog box 895
- Element Manager toolbar 896
- Displaying port properties 897
- VLAN View port properties 898
- Status indicator icons 901
- Table capabilities 901
- Performance data 902
- Configure dialog box 903
- Management Module switchover 904
- Switch Fabric Module 905
- Port mirroring 906
- FIGURE 338 sFlow dialog box 908
- Adding a VRRP/VRRP-E router 909
- VRF management 910
- FIGURE 341 Selecting VRF 911
- Adding VRF in an MLX device 912
- Deleting VRF in an MLX device 912
- Web Management interface 913
- TABLE 84 Troubleshooting 914
- Configuration file manager 915
- Viewing the configuration 920
- FIGURE 347 Compare dialog box 921
- Restoring a configuration 923
- Configuration deviation 925
- Change tracking 926
- RASLog events 928
- Configuration snapshots 934
- FIGURE 351 Compare dialog box 936
- • Not Applicable 937
- VLAN configuration name 938
- Schedule backup 941
- Disabling a backup schedule 943
- IP Configuration Wizard 945
- Payloads 946
- Interface Payloads: 947
- Payload name Description 947
- • Save to Flash 951
- • Save to Flash and Reload 951
- CLI Configuration Management 957
- CLI configuration overview 957
- Viewing existing templates 958
- Changing product credentials 964
- Previewing CLI commands 966
- CLI command guidelines 967
- Testing a configuration 969
- Deleting a configuration 973
- CLI configuration deployment 974
- Monitoring configurations 975
- CLI deployment reports 982
- CLI configuration scheduling 983
- Obtaining software files 987
- Boot image management 988
- Software image management 991
- Unified image management 994
- Updating unified images 997
- Updating firmware serially 997
- VLAN Management 1001
- Super-aggregated VLAN 1002
- Private VLAN 1002
- Remote Switched Port Analyzer 1002
- Transparent LAN Support 1003
- Displaying a list of VLANs 1004
- VLAN Manager tabs 1005
- Displaying VLANs by products 1007
- FIGURE 385 MAC Group Address 1008
- Port VLANs 1010
- Assigning DCB ports to a VLAN 1013
- Adding VLAN properties 1013
- Deploying VLAN configurations 1016
- Target context STP type 1018
- Configuring MSTP on a product 1020
- VLAN routing 1022
- MPLS Management 1025
- MPLS licensing 1026
- MPLS overview 1027
- Viewing LSP path information 1030
- Viewing RSVP LSP information 1032
- Adding an LSP admin group 1034
- Editing an LSP admin group 1035
- Deleting an LSP admin group 1036
- Adding an LSP path 1036
- Editing an LSP path 1037
- Duplicating an LSP path 1038
- Deleting an LSP path 1038
- FIGURE 410 Bypass LSP 1045
- Editing an RSVP LSP 1046
- Duplicating an RSVP LSP 1046
- Deleting an RSVP LSP 1046
- Displaying LSP Topologies 1048
- LSP Topology View Options 1049
- PE Router PE Router 1050
- Penultimate Egress 1050
- Tunnel LSP 1050
- VLL manager 1051
- VLL Manager Views tab 1052
- Editing a VLL instance 1063
- Deleting VLL instances 1063
- VPLS Manager 1067
- Configuring endpoint settings 1073
- Editing a VPLS instance 1078
- Deleting a VPLS instance 1078
- VCID pools 1080
- Editing a MEP 1089
- Sending a loopback message 1094
- Sending a linktrace message 1095
- Configuring frame delay 1097
- VIP Servers 1099
- Server port statistics 1103
- Global Server Load Balancing 1105
- Viewing the GSLB Manager 1106
- GSLB policy management 1107
- GSLB site management 1113
- GSLB zone configuration 1115
- Adding a host to a zone 1117
- Deleting a zone configuration 1118
- Controller configuration 1119
- • Metric used 1120
- Scheduling a deployment 1122
- In this chapter 1125
- SSL certificates 1125
- SSL certificate configuration 1126
- Creating key passwords 1139
- Appending SSL certificates 1141
- Chaining SSL certificates 1141
- Deleting SSL certificates 1143
- Deployment Manager 1145
- Deploying a configuration 1147
- Viewing deployment logs 1147
- Performance Data 1151
- SAN performance measures 1152
- Example of SNMP v1 1154
- SAN performance overview 1155
- Example of showing FCIP-MIB 1157
- Example of enabling FCIP-MIB 1157
- Example for FC ports 1158
- Example for FCIP tunnels 1158
- Graph display 1161
- TABLE 95 Performance counters 1163
- IP configuration requirements 1165
- Adding measures to products 1168
- Adding measures to ports 1169
- Removing measures from ports 1170
- • 5 minutes 1173
- • 30 minutes 1173
- • 2 hours 1173
- Configuring graph options 1174
- FIGURE 468 Data points graph 1175
- Exporting a graph 1176
- Printing a graph 1177
- Editing system collectors 1178
- • Click Add 1189
- Deleting an expression 1190
- FIGURE 480 1191
- FIGURE 481 1191
- Mouse functions for graphs 1194
- MIB data collectors 1195
- IP Custom performance reports 1196
- Up to 2 years 1 day 1198
- IP sFlow configuration 1201
- TABLE 98 Interface Payload 1203
- Creating custom sFlow reports 1206
- 3. Click Add 1217
- Selecting a report 1221
- Measure list 1222
- Refresh list 1222
- 2D or 3D button 1222
- Graph check box 1222
- Table check box 1222
- Show DNS Name 1223
- Include Remaining Talkers 1223
- Date and time 1223
- Viewing top MAC talkers 1225
- Viewing top VLAN talkers 1225
- ID of the well-known port 1227
- Viewing IPv4 – Others 1231
- Viewing IPv6 Top Talkers 1231
- Valid TCP flags report 1234
- Viewing BGP paths report 1235
- IP traffic accounting 1236
- Frame Monitor 1239
- Frame types 1240
- Frame Monitoring requirements 1241
- Editing a frame monitor 1243
- Power Center 1247
- Data monitoring 1248
- Viewing PoE data for ports 1249
- Filtering port details 1250
- Viewing PoE charts 1253
- Refreshing PoE data 1256
- PoE power on demand 1257
- Schedule_Name 1266
- PoE thresholds 1268
- Adding a PoE port threshold 1270
- Viewing PoE thresholds 1272
- Updating a PoE threshold 1273
- Enabling PoE thresholds 1274
- Disabling PoE thresholds 1274
- Viewing PoE performance 1275
- • Allocation (W) 1276
- • Allocation % 1276
- • Consumption % 1278
- Policy Monitor 1281
- Fabric policy monitors 1282
- Icon Description 1288
- Configuration rules 1298
- Adding a configuration rule 1302
- Editing a configuration rule 1304
- Deleting a configuration rule 1306
- Selecting a product 1308
- Predefined conditions 1310
- Adding a configuration block 1313
- Predefined blocks 1316
- Predefined blocks (Continued) 1317
- Policy_Name 1318
- Fault Management 1325
- Event notification 1326
- ATTENTION 1327
- Defining filters 1328
- SNMP traps 1331
- SNMP trap forwarding 1333
- Adding a trap destination 1334
- Adding a new trap filter 1335
- Event reception 1337
- Adding an SNMP v3 credential 1339
- Trap customization 1341
- Registering traps 1342
- • Information about the trap 1343
- SNMP informs 1344
- Adding a syslog recipient 1345
- Removing a syslog recipient 1346
- Syslog forwarding 1347
- Adding a syslog filter 1348
- Event action definitions 1350
- Configuring varbind filters 1353
- Editing event actions 1358
- Special events handling 1361
- Acknowledging special events 1361
- Pseudo events 1367
- Setting pseudo event policies 1368
- Filtering pseudo event traps 1369
- Event custom reports 1378
- Defining report settings 1379
- Defining the report identity 1381
- 4. Click the Filter tab 1383
- Editing a report definition 1386
- Event custom report schedules 1387
- Event logs 1390
- Copying an entire log entry 1391
- Exporting the entire log 1391
- TABLE 106 Event Properties 1393
- Copying the entire Master Log 1394
- Exporting the Master Log 1394
- The “unnamed” filter 1397
- The “none” filter 1397
- Editing a filter 1397
- Duplicating a filter 1397
- Deleting a filter 1397
- Notes on filters 1398
- Packet Capture (Pcap) 1399
- C:\\SNORT\bin\SNORT.exe -c 1400
- Technical Support 1401
- Device technical support 1405
- Field Description 1410
- Field/Component Description 1412
- FTP server 1413
- Reports overview 1415
- IP report types 1415
- Viewing IP reports 1416
- IP Wired Products report 1418
- Detailed Product Report 1419
- Detailed Cluster Report 1423
- AP Products report 1426
- Module List report 1427
- Port VLAN report 1428
- Layer 3 VLAN report 1428
- IP Subnet List report 1429
- IP Address List report 1429
- MAC Address List report 1430
- Deployment reports 1432
- Preconfigured reports 1433
- User-defined reports 1433
- Viewing a report 1435
- Importing a report template 1436
- Exporting a report template 1436
- Deleting reports 1436
- Report content and functions 1437
- Products List report 1438
- Ports Tx/Rx Ratio report 1443
- Low Traffic Ports report 1445
- Host adapter reports 1446
- Adapters Inventory report 1447
- Adapters Faulty SFP report 1448
- Application menus 1451
- IP main menus 1452
- IP shortcut menus 1458
- Call Home Event Tables 1465
- Event Categories 1467
- Product audit events 1468
- Security events 1469
- User action events 1470
- Management server events 1470
- Product events 1471
- RASLog Events 1471
- User Privileges 1475
- About user privileges 1476
- • Fabric Ports 1481
- • Fabric Summary 1481
- IP privileges and behavior 1488
- About Roles and Access Levels 1491
- Device Properties 1495
- TABLE 137 Fabric properties 1496
- Viewing SAN device properties 1497
- Device properties (Continued) 1498
- • FC Ports 1499
- • GigE Ports 1499
- • IP Ports 1499
- • iSCSI Ports 1499
- • Virtual Sessions Ports 1499
- Viewing storage properties 1500
- Viewing iSCSI properties 1502
- TABLE 140 iSCSI Properties 1503
- Viewing port properties 1504
- TABLE 141 Port properties 1505
- • Authentication Algorithm 1506
- • Encryption Algorithm 1506
- • Diffie-Hellman 1506
- • SA Life 1506
- Port properties (Continued) 1507
- • IP Ping 1508
- • IP Traceroute 1508
- • IP Performance 1508
- IP device properties 1509
- Viewing VCS fabric properties 1514
- Host properties 1521
- 3. Click OK to close 1524
- Properties customization 1525
- Deleting a property field 1526
- 4. Click OK 1527
- Regular Expressions 1529
- TABLE 2 Character classes 1530
- TABLE 1 Characters 1530
- TABLE 7 Boundary matches 1531
- TABLE 8 Greedy quantifiers 1532
- TABLE 9 Reluctant quantifiers 1532
- TABLE 11 Logical operators 1532
- TABLE 12 Back references 1533
- CLI Templates 1535
- MCT Cluster Creation 1539
- MCT Cluster Deployment 1539
- MCT Cluster Undeployment 1539
- TABLE 31 MCT Cluster Deletion 1540
- TABLE 32 MCT Client Creation 1540
- TABLE 33 MCT Client Deletion 1540
- MPLS – Endpoint Configuration 1541
- Troubleshooting 1553
- Browser troubleshooting 1554
- Problem Resolution 1555
- Launch Client troubleshooting 1557
- Patch troubleshooting 1559
- Server troubleshooting 1560
- Supportsave troubleshooting 1562
- Wireless troubleshooting 1563
- Zoning troubleshooting 1564
- Database Fields 1565
- TABLE 19 ACH_EVENT_FILTER_MAP 1566
- TABLE 20 ACH_FILTER 1566
- TABLE 21 ACH_INFO 1566
- TABLE 22 AD_GROUP 1566
- TABLE 26 AOR_DEVICE_GROUP_MAP 1567
- TABLE 34 BIRTREPORT_PARAMETER 1569
- • 1 indicates PDF 1570
- • 2 indicates CSV 1570
- Database tables and fields 1571
- BIRTREPORT_SCHEDULE_PARAMETER 1571
- BIRTREPORT_SCHEDULE_TEMPLATE 1571
- BIRTTEMPLATE_PARAMETER 1571
- BOOT_IMAGE_DRIVER_MAP 1571
- TABLE 42 BOOT_LUN_SEQUENCE 1572
- TABLE 44 CAPABILITY_ 1572
- TABLE 45 CARD 1572
- TABLE 45 CARD (Continued) 1573
- • 0 - 1G 1574
- • 1 - 10G 1574
- • 2 - Dual mode 1574
- • 3 - Failover mode 1574
- TABLE 50 CEE_PORT 1575
- TABLE 51 CFG_BACKUP_ARCHIVE 1575
- TABLE 52 CHANGELOG 1576
- TABLE 53 CLI_TEMPLATE 1576
- TABLE 54 CLIENT_VIEW 1577
- TABLE 55 CLIENT_VIEW_COLUMN 1578
- TABLE 56 CLIENT_VIEW_MEMBER 1578
- TABLE 58 CLUSTER 1578
- TABLE 59 CLUSTER_MEMBER 1578
- TABLE 60 CNA_ETH_PORT 1579
- TABLE 62 CNA_ETH_PORT_CONFIG 1579
- TABLE 63 CNA_PORT 1580
- TABLE 64 COLLECTOR 1580
- TABLE 68 CONFIG_BLOCK 1581
- TABLE 69 CONFIG_CONDITION 1582
- TABLE 70 CORE_SWITCH 1582
- CORE_SWITCH (Continued) 1583
- TABLE 72 CORE_SWITCH_CHECKSUM 1584
- TABLE 74 CORE_SWITCH_DETAILS 1584
- • 1 is supported 1585
- • 0 is not supported 1585
- TABLE 75 CRYPTO_HOST 1586
- TABLE 76 CRYPTO_LUN 1587
- CRYPTO_LUN (Continued) 1588
- TABLE 77 CRYPTO_SWITCH 1589
- CRYPTO_TARGET_CONTAINER 1590
- CRYPTO_SWITCH (Continued) 1590
- TABLE 80 DASHBOARD 1591
- TABLE 81 DASHBOARD_CANVAS 1592
- TABLE 83 DASHBOARD_PROVIDER 1592
- TABLE 84 DASHBOARD_WIDGET 1593
- TABLE 86 DEFAULT_FAVORITES 1594
- DEFAULT_WIDGET_PREFERENCE 1595
- DEPLOYMENT_CONFIGURATION 1595
- DEFAULT_FAVORITES (Continued) 1595
- • 1-Presnapshot 1596
- • 2-Postsnapshot 1596
- • 3-Pre & Post snapshot 1596
- TABLE 92 DEPLOYMENT_STATUS 1597
- TABLE 94 DEVICE 1598
- TABLE 94 DEVICE (Continued) 1599
- TABLE 95 DEVICE_CONNECTION 1604
- TABLE 96 DEVICE_ENCLOSURE 1605
- DEVICE_ENCLOSURE_MEMBER 1606
- DEVICE_ENCLOSURE (Continued) 1606
- TABLE 98 DEVICE_FDMI_DETAILS 1607
- TABLE 99 DEVICE_GROUP 1607
- TABLE 100 DEVICE_GROUP_ENTRY 1608
- TABLE 101 DEVICE_GROUP 1608
- TABLE 103 DEVICE_NODE 1608
- TABLE 104 DEVICE_PORT 1609
- TABLE 107 DISK_USAGE 1611
- TABLE 108 ENCRYPTION_ENGINE 1611
- ENCRYPTION_ENGINE (Continued) 1612
- TABLE 109 ENCRYPTION_GROUP 1613
- ENCRYPTION_GROUP (Continued) 1614
- ENCRYPTION_GROUP_MEMBER 1615
- ENCRYPTION_KMIP_PARAMETERS 1615
- ENCRYPTION_TAPE_POOL 1615
- TABLE 113 ETHERNET_CLOUD 1616
- TABLE 114 ETHERNET_ISL 1616
- TABLE 115 EVENT 1616
- TABLE 115 EVENT (Continued) 1617
- TABLE 116 EVENT_CALL_HOME 1618
- TABLE 117 EVENT_CATEGORY 1618
- TABLE 118 EVENT_DESCRIPTION 1618
- TABLE 119 EVENT_DETAILS 1618
- TABLE 120 EVENT_FWD_FILTER 1619
- TABLE 121 EVENT_INSTANCE 1619
- TABLE 122 EVENT_MODULE 1620
- TABLE 123 EVENT_NOTIFICATION 1620
- TABLE 124 EVENT_ORIGIN 1621
- TABLE 125 EVENT_POLICY 1621
- TABLE 127 EVENT_PROCESSOR_MAP 1622
- TABLE 128 EVENT_RULE 1623
- TABLE 129 EVENT_RULE_ACTION 1623
- TABLE 130 FABRIC 1624
- TABLE 130 FABRIC (Continued) 1625
- TABLE 131 FABRIC_CHECKSUM 1626
- TABLE 132 FABRIC_COLLECTION 1626
- TABLE 135 FABRIC_MEMBER 1627
- TABLE 139 FAVORITES 1628
- TABLE 142 FCIP_TUNNEL 1629
- FCIP_TUNNEL (Continued) 1630
- FCIP_TUNNEL_CIRCUIT 1632
- FCIP_TUNNEL_PERFORMANCE 1635
- TABLE 145 FCOE_DEVICE 1636
- TABLE 146 FCR_ROUTE 1636
- TABLE 147 FEATURE 1636
- TABLE 148 FEATURE_EDITION_MAP 1636
- TABLE 149 FEATURES_USAGE 1636
- TABLE 150 FICON_DEVICE_PORT 1637
- TABLE 153 FOUNDRY_DEVICE 1638
- TABLE 154 FOUNDRY_MODULE 1638
- TABLE 157 FPORT_TRUNK_GROUP 1639
- TABLE 158 FPORT_TRUNK_MEMBER 1639
- TABLE 159 FRU 1640
- TABLE 160 FTP_SERVER 1641
- TABLE 161 GENERATED_REPORT 1641
- TABLE 159 FRU (Continued) 1641
- TABLE 162 GIGE_PORT 1642
- TABLE 164 GIGE_PORT_STATS 1643
- TABLE 165 GLOBAL_VLAN 1643
- TABLE 167 HA_CLUSTER 1644
- TABLE 168 HBA 1644
- TABLE 168 HBA (Continued) 1645
- • HBA/CNA/AnyIO/Mezzanine 1646
- • 0 - Unknow 1647
- • 1 - Yes 1647
- • 2 - No 1647
- TABLE 171 HBA_PORT_DETAIL 1648
- HBA_PORT_DETAIL (Continued) 1649
- HBA_PORT_DEVICE_PORT_MAP 1650
- HBA_PORT_FCOE_DETAILS 1650
- TABLE 174 HBA_REMOTE_PORT 1652
- HBA_REMOTE_PORT_LUN 1653
- HBA_REMOTE_PORT (Continued) 1653
- TABLE 176 HBA_TARGET 1654
- TABLE 177 HEALTH_STATUS 1654
- HOST_DISCOVERY_OPTIONS 1655
- HOST_DISCOVERY_REQ_GROUP 1656
- HOST_DISCOVERY_REQUEST 1656
- HOST_DISCOVERY_REQUESTS 1657
- HYPER_V_VIRTUAL_MACHINE 1657
- TABLE 186 IFL 1658
- TABLE 187 IFL_CONNECTION 1658
- TABLE 188 INTERFACE 1659
- TABLE 190 IP_DEVICE_LICENSE 1660
- TABLE 191 IP_INTERFACE 1661
- TABLE 192 IP_PORT_GROUP 1661
- TABLE 193 IP_ROUTE 1661
- TABLE 194 IP_SUBNET_VLAN 1662
- TABLE 195 IPX_NETWORK_VLAN 1662
- TABLE 196 ISL 1662
- • 0 denotes untrusted 1663
- • 1 denotes trusted 1663
- • 0 denotes present 1663
- TABLE 198 ISL_TRUNK_GROUP 1664
- TABLE 197 ISL_CONNECTION 1664
- TABLE 199 ISL_TRUNK_MEMBER 1665
- TABLE 200 KEY_VAULT 1665
- • 0 = Standard 1666
- • 1= Extended 1666
- • 1 = Clear stats is enabled 1666
- TABLE 205 L2_NEIGHBOR 1667
- TABLE 208 LAG 1668
- TABLE 209 LAG_MEMBER 1669
- TABLE 208 LAG (Continued) 1669
- TABLE 212 LICENSE 1670
- TABLE 214 LICENSE_FEATURE_MAP 1671
- TABLE 215 LICENSE_RULE 1671
- TABLE 216 LICENSED_FEATURE 1671
- TABLE 217 LINK 1672
- TABLE 218 LOCK 1672
- TABLE 219 LSAN_DEVICE 1672
- TABLE 220 LSAN_TAG_CONFIG 1672
- TABLE 221 LSAN_PROXY_DEVICE 1673
- TABLE 222 LSAN_ZONE 1673
- TABLE 223 LSAN_ZONE_DB_CONFIG 1673
- TABLE 224 LSAN_ZONE_MEMBER 1673
- TABLE 225 MCT_CLIENT 1673
- • Deployed(0) 1674
- • Undeployed(1) 1674
- TABLE 229 MAC_GROUP 1675
- TABLE 230 MAC_GROUP_MEMBER 1675
- TABLE 231 MANAGED_ELEMENT 1675
- TABLE 232 MAPS_EVENT 1676
- TABLE 233 MAPS_EVENT_DETAILS 1676
- TABLE 235 MAPS_POLICY 1677
- TABLE 236 MARCHING_ANTS 1677
- TABLE 237 MEASURE 1677
- TABLE 238 MESSAGE_RECIPIENT 1678
- TABLE 239 MIGRATION_HISTORY 1678
- TABLE 237 MEASURE (Continued) 1678
- TABLE 240 MODULE 1679
- TABLE 241 MODULE_SLOT_PRESENT 1680
- TABLE 242 MPLS_ADMIN_GROUP 1680
- TABLE 240 MODULE (Continued) 1680
- TABLE 244 MPLS_LSP 1681
- TABLE 245 MPLS_PATH 1681
- TABLE 246 MPLS_PATH_HOP 1681
- TABLE 247 MPLS_RSVP_LSP 1682
- MPLS_RSVP_LSP_ADMIN_GROUP 1683
- MPLS_RSVP_LSP_FRR_PARAMETERS 1683
- TABLE 253 MPLS_RSVP_LSP_PATH 1684
- TABLE 255 MPLS_SERVICE 1685
- MPLS_SERVICE_PEER_RELATION 1686
- TABLE 259 MRP_RING 1687
- TABLE 260 MRP_RING_DEVICE 1687
- TABLE 261 N2F_PORT_MAP 1688
- TABLE 262 NETWORK_VLAN 1688
- TABLE 263 NETWORK_SCOPE_TYPE 1689
- TABLE 264 NIC_PROFILE 1689
- TABLE 265 NPORT_WWN_MAP 1689
- TABLE 266 NP_FLOW_DEFINITION 1689
- TABLE 267 NP_SUB_FLOW 1690
- TABLE 269 OUI_VENDOR 1691
- • device level collector is 0 1692
- • port level collector is 1 1692
- TABLE 273 PBR_NEXT_HOP 1693
- TABLE 274 PBR_POLICY 1693
- TABLE 275 PBR_RULE 1693
- TABLE 276 PBR_RULE_ACL_LIST 1693
- TABLE 277 PHANTOM_PORT 1694
- TABLE 278 PHYSICAL_DEVICE 1694
- TABLE 279 PHYSICAL_INTERFACE 1695
- TABLE 280 PHYSICAL_PORT 1696
- TABLE 284 PM_DASHBOARD_WIDGET 1697
- TABLE 285 PM_DATA_COLLECTOR 1698
- TABLE 286 PM_MEASURE 1699
- • 0 = product level 1701
- • 1 = port level 1701
- • 0 = disabled 1701
- • 1 = enabled 1701
- TABLE 296 POE_THRESHOLD_EVENT 1702
- TABLE 297 POLICY_RULE 1702
- TABLE 298 POLICY_RULE_MAP 1702
- PORT_BOTTLENECK_CONFIG 1703
- PORT_BOTTLENECK_STATUS 1703
- PORT_COMMISSION_CIMOM_SERVER 1703
- TABLE 302 PORT_FENCING_POLICY 1704
- TABLE 304 PORT_PROFILE 1705
- TABLE 305 PORT_PROFILE_DOMAIN 1705
- PORT_PROFILE_QOS_PFC_MAP 1707
- PORT_PROFILE_VLAN_MAP 1707
- PORT_PROFILE_QOS_MAP 1707
- • 0 = Disabled 1708
- • 1 = Enabled 1708
- TABLE 313 PRIVILEGE 1709
- TABLE 314 PRODUCT_APP 1709
- TABLE 315 PROTOCOL_VLAN 1710
- TABLE 316 QRTZ_BLOB_TRIGGERS 1710
- TABLE 317 QRTZ_CALENDARS 1710
- TABLE 318 QRTZ_CRON_TRIGGERS 1710
- TABLE 319 QRTZ_FIRED_TRIGGERS 1710
- TABLE 320 QRTZ_JOB_DETAILS 1711
- TABLE 321 QRTZ_JOB_LISTENERS 1711
- TABLE 322 QRTZ_LOCKS 1711
- QRTZ_PAUSED_TRIGGER_GRPS 1712
- QRTZ_SCHEDULER_STATE 1712
- QRTZ_SIMPLE_TRIGGERS 1712
- QRTZ_SIMPROP_TRIGGERS 1712
- TABLE 328 QRTZ_TRIGGERS 1713
- TABLE 331 RAS_LOG 1714
- TABLE 332 RECIPIENT_TYPE 1714
- TABLE 334 REPORT_TYPE 1714
- TABLE 335 REPORT_TEMPLATE 1715
- • 0= Not Hidden 1716
- • 1= Hidden 1716
- TABLE 344 RULE_CONDITION_MAP 1717
- TABLE 346 SAN 1717
- TABLE 347 SAN_CONNECTION 1717
- TABLE 348 SCOM_HOST 1718
- TABLE 349 SECURITY_POLICY 1718
- TABLE 351 SENSOR 1719
- TABLE 352 SFLOW_CHECKPOINT 1720
- TABLE 353 SFLOW_HOUR_SUMMARY 1720
- TABLE 351 SENSOR (Continued) 1720
- • 0 means its edge port 1722
- • 1 means its trill port 1722
- TABLE 358 SFLOW_MINUTE_MAC 1723
- TABLE 361 SFLOW_MINUTE_VLAN 1724
- • 1 means its fabric port 1725
- SFLOW_STAGING (Continued) 1726
- TABLE 366 SFLOW_STAGING_SLNUM 1727
- TABLE 367 SMART_CARD 1727
- • 1-Pre snapshot 1728
- • 2-Post snapshot 1728
- TABLE 371 SNMP_DATA 1729
- TABLE 372 SNMP_DATA_1DAY 1730
- TABLE 373 SNMP_DATA_2HOUR 1730
- TABLE 374 SNMP_DATA_30MIN 1731
- TABLE 375 SNMP_EXPR_DATA 1731
- TABLE 378 SNMP_EXPRESSION 1732
- TABLE 379 SNMP_PROFILE 1732
- SNMP_PROFILE (Continued) 1733
- TABLE 383 SSL_CERTIFICATE 1734
- TABLE 385 SSL_KEY 1735
- TABLE 386 SSL_KEY_PASSWORD 1736
- TABLE 387 STATS_AGING 1736
- TABLE 388 STP_PORT 1736
- TABLE 385 SSL_KEY (Continued) 1736
- TABLE 389 STP_INSTANCE 1737
- • 0 - Disabled 1738
- • 1 - Enabled 1738
- • CEE_RUNNING=1 1739
- • CEE_STARTUP=2 1739
- • INVALID=-1 1739
- TABLE 393 SWITCH_LICENSE 1740
- TABLE 394 SWITCH_MODEL 1740
- TABLE 395 SWITCH_PORT 1741
- SWITCH_PORT (Continued) 1742
- SWITCH_PORT_PERFORMANCE 1745
- TABLE 399 SYSTEM_PROPERTY 1746
- TABLE 400 TARGET_TYPE 1747
- TABLE 401 THIRD_PARTY_DEVICE 1747
- TABLE 402 THRESHOLD_MEASURE 1747
- TABLE 403 THRESHOLD_POLICY 1747
- TABLE 404 TIME_SERIES_DATA 1747
- TIME_SERIES_DATA_1DAY 1748
- TIME_SERIES_DATA_2HOUR 1748
- TIME_SERIES_DATA (Continued) 1748
- TABLE 408 TIME_SERIES_DATA_1 1749
- TIME_SERIES_DATA_1_1DAY 1750
- TIME_SERIES_DATA_1_2HOUR 1750
- TABLE 412 TIME_SERIES_DATA_2 1751
- TIME_SERIES_DATA_2_1DAY 1752
- TIME_SERIES_DATA_2_2HOUR 1753
- TIME_SERIES_DATA_2_30MIN 1753
- TABLE 416 TIME_SERIES_DATA_3 1754
- TIME_SERIES_DATA_3_2HOUR 1755
- TIME_SERIES_DATA_3_30MIN 1755
- TABLE 420 TIME_SERIES_DATA_4 1756
- TIME_SERIES_DATA_4_1DAY 1757
- TIME_SERIES_DATA_4_2HOUR 1757
- TABLE 424 TIME_SERIES_DATA_5 1758
- TIME_SERIES_DATA_5_30MIN 1759
- TABLE 426 TOOL_APP 1760
- TABLE 427 TOOL_PATH 1760
- TABLE 428 TOPO_MAP_IMAGE 1760
- TABLE 429 TRILL 1760
- TABLE 430 TRILL_TRUNK_GROUP 1761
- TABLE 431 TRILL_TRUNK_MEMBER 1761
- TABLE 433 TRUNK_GROUP_MEMBER 1761
- • 0=Disabled 1762
- • 1=Enabled 1762
- USER_DEFINED_DEVICE_DETAIL 1763
- USERDEFINED_NETWORK_SCOPE 1763
- TABLE 439 USER_PREFERENCE 1764
- TABLE 442 USER_RESOURCE_MAP 1764
- TABLE 443 USER_ROLE_MAP 1764
- TABLE 444 USER_STATE_MAP 1765
- TABLE 445 V_PORT_DETAIL 1765
- TABLE 446 VCN_ICL 1765
- TABLE 447 VCN_MEMBER 1765
- • Disabled(0) 1766
- • Enabled(1) 1766
- TABLE 450 VCEM_PROFILE 1767
- TABLE 451 VIP_SERVER 1767
- TABLE 452 VIP_SERVER_BINDING 1768
- TABLE 454 VIRTUAL_FCOE_PORT 1768
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1769
- VIRTUAL_FCOE_PORT_STAT 1769
- VIRTUAL_FCOE_PORT (Continued) 1769
- • 1-Enabled 1770
- • 0-disabled 1770
- VIRTUAL_SWITCH (Continued) 1771
- TABLE 472 VMOTION_EVENT 1777
- TABLE 474 VM_DATA_CENTER 1778
- TABLE 476 VM_DV_PORT 1779
- TABLE 477 VM_DV_PORT_GROUP 1780
- TABLE 478 VM_DV_SWITCH 1781
- TABLE 480 VM_FC_HBA 1782
- • Fabric 1783
- • Point to point 1783
- • Unknown 1783
- VM_HOST_END_DEV_CONNECTIVITY 1784
- VM_HOST_PROXY_SWITCH 1784
- VM_HOST (Continued) 1784
- TABLE 486 VM_HOST_VIRTUAL_NIC 1785
- TABLE 487 VM_NETWORK_SETTINGS 1786
- TABLE 489 VM_PATH 1787
- TABLE 490 VM_PHYSICAL_NIC 1788
- TABLE 489 VM_PATH (Continued) 1788
- TABLE 491 VM_SECURITY_POLICY 1789
- • VMKernel 1790
- • Service Console 1790
- TABLE 495 VM_STORAGE 1791
- TABLE 498 VM_VCENTER 1792
- TABLE 499 VM_VCENTER_MEMBER 1793
- TABLE 501 VM_VIRTUAL_MACHINE 1795
- VPLS_DEVICE_RELATION 1796
- VPLS_ENDPOINT_RELATION 1796
- TABLE 505 VR_CONN_DOMAIN 1797
- TABLE 508 VR_CONN_MODULE 1798
- TABLE 509 VR_CONN_MODULE_PORT 1798
- TABLE 511 VR_CONN_WWN 1799
- TABLE 514 WT_ARCHIVE 1800
- TABLE 515 ZONE 1800
- TABLE 516 ZONE_ALIAS 1801
- TABLE 517 ZONE_ALIAS_IN_ZONE 1801
- TABLE 518 ZONE_ALIAS_MEMBER 1801
- TABLE 519 ZONE_DB 1801
- TABLE 520 ZONE_DB_CONFIG 1802
- TABLE 521 ZONE_DB_CONTENT 1802
- TABLE 522 ZONE_DB_USERS 1802
- TABLE 523 ZONE_IN-ZONE_SET 1802
- TABLE 524 ZONE_MEMBER 1802
- ADAPTER_PORT_CONFIG_INFO 1803
- AG_CONNECTION_INFO 1803
- BIRTREPORT_SCHEDULE_INFO 1804
- BOOT_IMAGE_FILE_DETAILS_INFO 1805
- CNA_ETH_PORT_CONFIG_INFO 1805
- CNA_PORT_DETAILS_INFO 1806
- CNA_PORT_INFO 1806
- CORE_SWITCH_DETAILS_INFO 1807
- CRYPTO_HOST_LUN_INFO 1808
- CRYPTO_TARGET_ENGINE_INFO 1809
- DASHBOARD_PREFERENCES_INFO 1809
- DEPLOYMENT_INFO 1810
- DEPLOYMENT_LOG 1811
- DEVICE_CONNECTION_INFO 1811
- EE_MONITOR_STATS_5MIN_INFO 1812
- EE_MONITOR_STATS_30MIN_INFO 1812
- EE_MONITOR_STATS_2HOUR_INFO 1812
- EE_MONITOR_STATS_1DAY_INFO 1813
- TE_PORT_STATS_5MIN_INFO 1813
- TE_PORT_STATS_30MIN_INFO 1814
- TE_PORT_STATS_2HOUR_INFO 1814
- TE_PORT_STATS_1DAY_INFO 1814
- SWITCH_INFO 1815
- SWITCH_REPORT_INFO 1817
- DEVICE_INFO 1819
- N2F_PORT_MAP_INFO 1820
- DEVICE_NODE_INFO 1821
- DEVICE_PORT_INFO 1822
- DEVICE_REPORT_INFO 1823
- DEV_PORT_GIGE_PORT_LINK_INFO 1824
- DEV_PORT_MAC_ADDR_MAP_INFO 1824
- ISL_CONNECTION_INFO 1825
- ISL_INFO 1825
- ETHERNET_ISL_INFO 1826
- EVENT_DETAILS_INFO 1827
- EVENT_INFO 1828
- FABRIC_INFO 1829
- FCIP_TUNNEL_CIRCUIT_INFO 1830
- FCIP_TUNNEL_INFO 1831
- FCOE_DEVICE_INFO 1832
- FRU_INFO 1832
- GIGE_PORT_ECLOUD_LINK_INFO 1833
- GIGE_PORT_INFO 1833
- GENERATED_BIRTREPORT_INFO 1834
- HBA_PORT_DETAILS_INFO 1835
- HBA_TARGET_INFO 1837
- HEALTH_STATUS_INFO 1838
- HOST_INVENTORY_REPORT_INFO 1839
- HOST_DISCOVERY_REQUEST_INFO 1842
- HOST_DISCOVERY_REQUESTS_INFO 1843
- IFL_INFO 1845
- IFL_REPORT_INFO 1845
- ISL_REPORT_INFO 1849
- ISL_TRILL_INFO 1851
- ISL_TRUNK_GROUP_MEMBER_INFO 1852
- ISL_TRUNK_INFO 1853
- L2_NEIGHBOR_INFO 1853
- MAPS_EVENT_DETAILS_INFO 1854
- N2F_PORT_MAP_REPORT_INFO 1855
- MODULE_INFO 1858
- NPORT_WWN_MAP_INFO 1860
- PHANTOM_PORT_INFO 1860
- PRODUCT_INFO 1861
- PORT_BOTTLENECK_CONF_INFO 1863
- PORT_BOTTLENECK_STAT_INFO 1863
- PORT_GROUP_INFO 1864
- ROLE_PRIVILEGE_INFO 1864
- PORT_PROFILE_INFO 1865
- PORT_PROFILE_INTERFACE_INFO 1865
- PORT_PROFILE_MAC_INFO 1866
- PORT_VLAN_INFO 1866
- PROTOCOL_VLAN_INFO 1867
- SFLOW_MINUTE_L3_VIEW 1867
- SFLOW_MINUTE_MAC_VIEW 1867
- SCOM_EE_MONITOR_INFO 1868
- SENSOR_INFO 1868
- SMART_CARD_USAGE_INFO 1869
- SWITCH_CONFIG_INFO 1870
- SWITCH_PORT_DETAILS_INFO 1871
- SWITCH_DETAILS_INFO 1876
- SWITCH_DISCOVERED_MAC_INFO 1878
- SWITCH_PORT_INFO 1878
- SWITCH_SNMP_INFO 1880
- TIME_SERIES_DATA_INFO 1882
- TIME_SERIES_DATA_VIEW 1883
- TRILL_INFO 1884
- TRILL_TRUNK_INFO 1885
- USER_ROLE_RESOURCE_INFO 1885
- VIRTUAL_FCOE_PORT_INFO 1886
- VIRTUAL_PORT_WWN_DETAILS_INFO 1886
- VM_ADDRESS_INFO 1887
- VLAN_INT_CLASSIFIER_INFO 1888
- VM_CONNECTIVITY_INFO 1888
- VM_NETWORK_CONNECTIVITY_INFO 1891
- VM_DATASTORE_DETAILS_INFO 1893
- VM_EE_MONITOR_INFO 1893
- VM_HOST_INFO 1894
- VM_LUN_INFO 1895
- VM_STATISTICS_INFO 1895
- VR_CONN_MODULE_INFO 1897
- VR_CONN_MODULE_PORT_INFO 1899
- VR_CONN_NPIV_INFO 1900
- VMM_DISCOVERED_MAC_INFO 1901
- ZONE_DB_INFO 1902
- ZONE_DB_REPORT_INFO 1903
- AP_USAGE 1903
- SFLOW_MINUTE_BGP_VIEW 1903
- SFLOW_MINUTE_VLAN_VIEW 1904
- PHYSICAL_DEVICE_INFO 1904
- SLOT_INFO 1904
- MANAGED_ELEMENT_INFO 1905
- SNMP_DATA_INFO 1905
- SNMP_EXPR_DATA_INFO 1905
- SNMP_DATA_VIEW 1905
- VM_VNETWORK_INFO 1908
- VCS_CLUSTER_MEMBER_INFO 1909
- RESET_VCS_LICENSED 1910
- WIRELESS_INTERFACE 1910
- WIRED_INTERFACE 1911
- CEE_PORT_INFO 1913
- Brocade International, 457 1916
- EMC, 462 1916
- HP LAN, 463 1916
- IBM, 457 1916
Relacionado con productos y manuales para Software Brocade Network Advisor IP User Manual v12.3.0
(238 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales