Brocade Fabric OS Encryption Administrator’s Guide Support Manual de usuario Pagina 313

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 332
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 312
Fabric OS Encryption Administrator’s Guide (DPM) 293
53-1002922-01
Fabric OS and DPM Compatibility Matrix
6
If a device decommission firmware consistency check is enabled in the encryption group, firmware
downgrades to a Fabric OS version earlier than v6.4. will be blocked until the firmware consistency
check for device decommission feature is disabled.
The firmware consistency check for device decommission is enabled when you execute the
following:
SecurityAdmin:switch> cryptocfg --decommission -container <container name>
-initiator <initiatator PWWN> -LUN <lun number>
The firmware consistency check for device decommission is disabled when you execute the
following:
SecurityAdmin:switch> cryptocfg --delete –decommissionedkeyids
The success of the operation does not mandate that the firmware consistency check be
disabled for device decommission.
NOTE
When disabling the firmware consistency check, there should be no LUNs with pending
decommission or in a failed state. If the firmware download to a version earlier than Fabric OS 6.4.0
is disallowed because of any LUNs under decommission or in a failed state, you must either
complete decommissioning or remove the offending LUNs before retrying cryptocfg
--delete
-decommissionedkeyids to disable the firmware consistency check.
NOTE
You should not join a Fabric OS 6.3.0(x) node into an encryption group or eject a node with Fabric
OS 6.4.0 and later when the firmware consistency check for the device decommission feature is
enabled in the encryption group.
Fabric OS and DPM Compatibility Matrix
DPM 3.1 introduces the GKA feature, which is incompatible with the RKM 2.1.1 client. DPM 3.2
offers a solution to resolve this incompatiability issue with the RKM 2.1.1 client. DPM 3.1 client is
compatible with DPM 3.x servers, but is not compatible with RKM 2.x servers.
Because of the limitations associated with the RKM 2.1.1 client and the DPM 3.1 server, it is
recommended that you move to DPM 3.2 server instead of v3.1.
Table 15 identifies Fabric OS and DPM compatibility.
TABLE 15 Compatibility Matrix
Fabric OS version Client SDK Server version
RKM 2.7.x DPM 3.2
v7.0.1 and earlier RKM 2.1.1 Yes Yes
v7.1.0 and later DPM 3.1 No Yes
Vista de pagina 312
1 2 ... 308 309 310 311 312 313 314 315 316 317 318 ... 331 332

Comentarios a estos manuales

Sin comentarios