Brocade Fabric OS Encryption Administrator’s Guide Support Manual de usuario descargar pdf (Pagina 95)

Fabric OS Encryption Administrator’s Guide (DPM) 75

53-1002922-01

Adding target tape LUNs for encryption

FIGURE 57 Add Encryption Target Tape LUNs dialog box

5. Select a host from the Host list.

Before you encrypt a LUN, you must select a host, then either discover LUNs that are visible to

the virtual initiator representing the selected host, or enter a range of LUN numbers to be

configured for the selected host.

When you select a specific host, only the LUNs visible to that host are displayed. If you select

All Hosts, LUNs visible to all configured hosts are displayed. If a LUN is visible to multiple hosts,

it is listed once for each host.

6. Choose a LUN to be added to an encryption target container using one of the two following

methods:

• Discover: Identifies the exposed logical unit number for a specified initiator. If you already

know the exposed LUNs for the various initiators accessing the LUN, you can enter the

range of LUNs using the alternative method.

• Enter a LUN number range: Allows you to enter a From value and a To value to manually

enter the logical unit numbers for the selected host(s).

7. Cl ic k Show LUNs.

The LUN needed for configuring a Crypto LUN is the LUN that is exposed to a particular initiator.

The table displays the following information:

• Host: The host on which the LUN is visible.

• LUN #: The logical unit’s number.

• Vol. Label Prefix: Optional. The user-supplied tape volume label prefix to be included in

tape volume labels generated b the switch for encrypted tapes.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 331 332

Sin comentarios

Brocade Fabric OS Encryption Administrator’s Guide Support Manual de usuario Pagina 95