Brocade Multi-Service IronWare Security Configuration Guid Manual de usuario descargar pdf (Pagina 161)

Multi-Service IronWare Security Configuration Guide 143

53-1003035-02

IP broadcast ACL

Brocade(config-if-e1000-4/1)# show access-list subnet-broadcast accounting

ethernet 4/1

Subnet broadcast ACL 120

0: permit udp host 10.10.10.1 host 10.20.20.255

Hit count: (1 sec) 0 (1 min) 0

(5 min) 0 (accum) 0

1: permit tcp host 10.10.10.1 host 10.20.20.255

Hit count: (1 sec) 10 (1 min) 67

(5 min) 0 (accum) 67

2: deny ip any any

Hit count: (1 sec) 0 (1 min) 0

(5 min) 0 (accum) 0

Syntax: show access-list subnet-broadcast accounting [ethernet | ve] port-id or vid

The ethernet, and ve options specify the interfaces for which you can display the accounting

information. If you specify an Ethernet interface, you must also specify the port number associated

with the interface. If you specify a VE interface, you must specify the VE number associated with the

interface.

The port-id parameter specifies the port for which you want to display the accounting information.

The vid parameter specifies the VE interface ID.

Table 21 describes the output parameters of the show access-list subnet-broadcast accounting

command.

To display the accounting information for an IP broadcast ACL globally, enter the following

command.

Brocade# show access-list subnet-broadcast accounting global

Subnet broadcast ACL 12

0: permit enable-accounting host 10.1.103.217

Hit count: (1 sec) 2 (1 min) 150

(5 min) 0 (accum) 384

1: deny enable-accounting host 172.24.103.217

Hit count: (1 sec) 4 (1 min) 298

(5 min) 0 (accum) 764

2: permit enable-accounting host 10.100.103.217

Hit count: (1 sec) 10 (1 min) 600

(5 min) 0 (accum) 1540

TABLE 21 Output parameters of the show access-list subnet-broadcast accounting command

Field Description

Subnet broadcast ACL ID The ID of the IP broadcast ACL.

# The index of the IP broadcast ACL entry, starting with 0, followed by the permit or deny

condition defined for that ACL entry. (The first entry created for an ACL is assigned the

index 0. The index of the subsequent entries created are incremented by 1.)

permit udp host The UDP packets are permitted from a specific source address to a specific destination

address.

permit tcp host The TCP packets are permitted from a specific source address to a specific destination

address.

deny ip any The IP packets are denied for all the host addresses.

Hit count The number of hits for each counter.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 369 370

Comentarios a estos manuales

Sin comentarios

Brocade Multi-Service IronWare Security Configuration Guid Manual de usuario Pagina 161

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Multi-Service IronWare Security Configuration Guid