Brocade Multi-Service IronWare Security Configuration Guid Manual de usuario Pagina 210
- Pagina / 370
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
192 Multi-Service IronWare Security Configuration Guide
53-1003035-02
Configuring an IPv6 ACL
4
NOTE
Refer to “Configuration considerations for IPv6 ACL and multicast traffic for 2X100GE modules
installed on NetIron MLX and NetIron XMR devices” regarding 2x100 GE IPv6 ACL rule exceptions
for multicast traffic.
For UDP
Syntax: [no] ipv6 access-list acl name
Syntax: [no] permit | deny udp
ipv6-source-prefix/prefix-length | any | host source-ipv6_address [tcp-udp-operator
[source port number]]
ipv6-destination-prefix/prefix-length | any | host ipv6-destination-address
[tcp-udp-operator [destination port number]]
[ipv6-operator [value]]
[copy-sflow] | [drop-precedence dp-value] | [drop-precedence-force dp-value] |[dscp
dscp-value] | [dscp-marking dscp-value] | [eq | gt | lt | neq | range port-number] |
[mirror] | [priority-forcenumber] | [sequence num]
Syntax: [no] [sequence num] permit | deny udp
ipv6-source-prefix/prefix-length | any | host
source-ipv6_address [tcp-udp-operator
[source port number]]
ipv6-destination-prefix/prefix-length | any | host ipv6-destination-address
[tcp-udp-operator [destination port number]]
[ipv6-operator [value]]
[copy-sflow] | [drop-precedence dp-value] | [drop-precedence-force dp-value] |[dscp
dscp-value] | [dscp-marking dscp-value] | [eq | gt | lt | neq | range port-number] |
[mirror] | [priority-forcenumber]
Syntax: regenerate-seq-num [num]
The udp protocol indicates the you are filtering UDP packets.
NOTE
Refer to “Configuration considerations for IPv6 ACL and multicast traffic for 2X100GE modules
installed on NetIron MLX and NetIron XMR devices” regarding 2x100 GE IPv6 ACL rule exceptions
for multicast traffic.
dscp-marking dscp-value Use the dscp-marking dscp-value parameter to specify a new QoS
value to the packet. If a packet matches the filters in the ACL
statement, this parameter assigns the DSCP value that you specify
to the packet. Enter 0 – 63.
mirror Allows you to mirror packets matching the ACL permit clause.
priority-force value Allows you to force packets outgoing priority. You can specify a value
from 0 through 7.
IPv6 ACL arguments Description
- Multi-Service IronWare 1
- Document History 2
- Contents 3
- Chapter 3 Access Control List 6
- 53-1003035-02 10
- About This Document 13
- Supported software 14
- Document conventions 15
- Notice to the reader 16
- Related publications 16
- In this chapter 17
- Securing access methods 21
- Example 25
- • SSH access 28
- • Telnet access 28
- • Web management access 28
- • SNMP access 28
- Defining the Telnet idle time 29
- • TFTP access 30
- Enabling Telnet access 32
- HP ProCurve Manager 33
- Enabling SNMP access 33
- Setting passwords 34
- Disabling password encryption 38
- Regular password rules 40
- Strict password rules 41
- Password history 42
- Setting passwords to expire 42
- Login lockout 43
- Web interface login lockout 44
- Management Interface 45
- Generating an SSL certificate 46
- TACACS authentication 48
- TACACS+ authentication 48
- TACACS+ authorization 48
- TACACS+ accounting 49
- TACACS functions 53
- Setting the TACACS+ key 54
- TACACS or TACACS+ 55
- Telnet or SSH login 56
- Example 3: 57
- Example 4: 57
- Example 1: 57
- (shell) access 61
- TACACS or TACACS+ packets 62
- Configuring RADIUS security 67
- • A list of commands 68
- RADIUS authorization 69
- RADIUS accounting 69
- AAA operations for RADIUS 70
- AAA functions 75
- Radius health check 76
- Setting the RADIUS key 78
- Setting the timeout parameter 78
- Configuring RADIUS accounting 82
- RADIUS packets 83
- Method parameter Description 89
- Layer 2 Access Control Lists 91
- Configuration rules and notes 92
- Types of Layer-2 ACLs 93
- Brocade(config)# acl-policy 94
- Filtering broadcast traffic 101
- Using the priority option 101
- ACL accounting 105
- Displaying Layer-2 ACLs 106
- MLX series devices 107
- permit vlan 3000 ip any any 108
- NetIron CER devices 109
- Access Control List 111
- Brocade NetIron CES and 115
- Brocade NetIron CER 115
- Default ACL action 116
- Types of IP ACLs 117
- ACL IDs and entries 117
- Standard ACL syntax 121
- Brocade(config)# int eth 1/1 123
- Brocade(config)# write memory 123
- Extended ACL syntax 126
- ACL entry 127
- Displaying ACL definitions 136
- • 1 – 99 for standard ACLs 137
- VLAN Accounting 138
- Modifying ACLs 139
- Adding or deleting a comment 141
- Applying ACLs to interfaces 143
- Enabling ACL conflict check 146
- Named ACLs 147
- Layer-4 information in an ACL 148
- 802.1p priority 153
- Numbered ACLs 155
- IP broadcast ACL 158
- Field Description 161
- IP broadcast ACL CAM 162
- IP receive ACLs 164
- Configuring rACLs 165
- 20 x 1G PPCR 1 1 - 20 170
- 4 x 10G PPCR 1 1 - 2 170
- PPCR 2 3 - 4 170
- 2 x 10G PPCR 1 1 - 2 170
- ACL deny logging 171
- • Enabling the Log Option 173
- Configuring the log timer 174
- Support for ACL CAM sharing 174
- This field... Displays 177
- Commands 179
- Release Command History 180
- Output field Description 187
- Configuring an IPv6 ACL 194
- Example configurations 195
- Deleting an IPv6 ACL entry 199
- ACL syntax 199
- TABLE 25 Syntax descriptions 200
- For ICMP 202
- TABLE 26 Syntax descriptions 204
- TABLE 27 Syntax descriptions 207
- Extended IPv6 ACLs 214
- CER devices 215
- CAM partitioning 224
- Applying an IPv6 ACL 224
- Reapplying modified IPv6 ACLs 225
- Clearing the ACL statistics 234
- IPv6 receive ACLs 235
- • IPv6 Multicast 236
- • Receive ACL 236
- • Rule-based ACL 236
- SSH server version 2 support 256
- Supported SSHv2 clients 257
- Supported features 257
- Configuring SSH server 258
- Syntax: show ip ssh config 259
- Generating a host key pair 260
- Brocade# ssh show-host-keys 261
- Device Low High Average 264
- Setting optional parameters 267
- Disabling 3-DES 270
- Outbound SSHv2 client 272
- Enabling SSHv2 client 273
- Using an SSH2 client 274
- Using Secure Copy 276
- • isis metric command 277
- • set-overload-bit command 277
- • admin-group 277
- • cspf-group 277
- • bypass-lsp 277
- Outbound commands: 278
- Inbound commands: 278
- RADIUS authentication 288
- Supported RADIUS attributes 289
- Setting RADIUS parameters 291
- Defining MAC address filters 293
- MAC address or port 300
- Overview 303
- Local and global resources 304
- Configuring port security 308
- IETF RFC support 314
- 802.1x ports 323
- Value Description 326
- RADIUS server 326
- Setting the port control 328
- Brocade(config)#dot1x-enable 329
- Setting the quiet period 330
- Initializing 802.1x on a port 332
- Displaying 802.1x information 333
- Displaying 802.1x statistics 336
- Clearing 802.1x statistics 337
- Sample 802.1x configurations 341
- Hub configuration 343
- TCP security enhancement 349
- Clear DoS attack statistics 352
- Securing SNMP Access 353
- • Modification of information 355
- • Message stream modification 355
- • Disclosure of information 355
- Configuring your NMS 356
- Defining the engine ID 356
- Defining an SNMP group 357
- Defining an SNMP user account 358
- Displaying the engine ID 359
- Displaying SNMP groups 360
- Displaying user information 360
- Defining SNMP views 362
- Simple SNMP v3 configuration 363
- Background 365
- Sequence Numbers 366
- Creating an ACL filter 367
Relacionado con productos y manuales para Accesorios De Computador Brocade Multi-Service IronWare Security Configuration Guid
Accesorios De Computador Brocade Unified IP MIB Reference (Supporting FastIron Rele Manual de usuario
(771 paginas)
(771 paginas)
Accesorios De Computador Brocade Multi-Service IronWare QoS and Traffic Management Manual de usuario
(226 paginas)
(226 paginas)
Accesorios De Computador Brocade Multi-Service IronWare Switching Configuration Gui Manual de usuario
(984 paginas)
(984 paginas)
Accesorios De Computador Brocade 6910 Ethernet Access Switch Configuration Guide (S Manual de usuario
(124 paginas)
(124 paginas)
Accesorios De Computador Brocade Multi-Service IronWare Multicast Configuration Gui Manual de usuario
(216 paginas)
(216 paginas)
Accesorios De Computador Brocade NetIron CER 2000 Series Hardware Guide (Supporting Manual de usuario
(110 paginas)
(110 paginas)
Accesorios De Computador Brocade Multi-Service IronWare Routing Configuration Guide Manual de usuario
(846 paginas)
(846 paginas)
Accesorios De Computador Brocade ICX 6610 Stackable Switch Hardware Installation Gu Manual de usuario
(108 paginas)
(108 paginas)
Accesorios De Computador Brocade ICX 6450 Stackable Switches Hardware Installation Manual de usuario
(116 paginas)
(116 paginas)
Accesorios De Computador Brocade Multi-Service IronWare Administration Guide (Suppo Manual de usuario
(432 paginas)
(432 paginas)
Accesorios De Computador Brocade Converged 10GbE Switch Module for IBM BladeCenter Manual de usuario
(12 paginas)
(12 paginas)
Accesorios De Computador Brocade ICX 6430-C Compact Switch Hardware Installation Gu Manual de usuario
(64 paginas)
(64 paginas)
Accesorios De Computador Brocade ICX 6450-C Compact Switch Hardware Installation Gu Manual de usuario
(64 paginas)
(64 paginas)
Accesorios De Computador Brocade Multi-Service IronWare Multiprotocol Label Switch Manual de usuario
(852 paginas)
(852 paginas)
Accesorios De Computador Brocade FCoE Switch Module for IBM BladeCenter Installatio Manual de usuario
(76 paginas)
(76 paginas)
Accesorios De Computador Brocade FastIron WS Hardware Installation Guide Manual de usuario
(74 paginas)
(74 paginas)
Accesorios De Computador Brocade TurboIron 24X Series Hardware Installation Guide Manual de usuario
(84 paginas)
(84 paginas)
Accesorios De Computador Brocade FastIron SX Series Chassis Hardware Installation G Manual de usuario
(192 paginas)
(192 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales