Brocade Multi-Service IronWare Security Configuration Guid Manual de usuario descargar pdf (Pagina 277)

Multi-Service IronWare Security Configuration Guide 259

53-1003035-02

Using Secure Copy

To copy and append a configuration file (c:\cfg\brocadehp.cfg) to the running configuration file on

a device at 192.168.1.50 and log in as user terry, enter the following command on the

SCP-enabled client.

C:\> scp c:\cfg\brocadehp.cfg [email protected]:runConfig

If you are copying the configuration file from the device to a PC or another machine (outbound), the

command saves the running configuration file to the PC. If you are copying a configuration file from

a PC to the device, (inbound) the command appends the source file to the running configuration

file on the device.

If password authentication is enabled for SSH server, the user is prompted for user terry’s

password before the file transfer takes place.

To copy and overwrite the current running configuration file, enter the following command.

C:\> scp c:\cfg\brocadehp.cfg [email protected]:runConfig-overwrite

When a configuration file is loaded using the Secure Copy feature, the following commands within

the configuration file are supported.

• isis metric command

• set-overload-bit command

• admin-group

• cspf-group

• bypass-lsp

If you are copying a configuration file from a PC to the device, (inbound) the command replaces the

source file on the device.

To copy the configuration file to the startup configuration file.

C:\> scp c:\cfg\brocadehp.cfg [email protected]:startConfig

To copy the configuration file to a file called config1.cfg on the Auxiliary flash card in slot 1 on a

management module.

C:\> scp c:\cfg\brocade.cfg [email protected]:slot1:/config1.cfg

To copy the configuration file to a file called config1.cfg on the Auxiliary flash card in slot 2 on a

management module.

C:\> scp c:\cfg\brocade.cfg [email protected]:slot2:/config1.cfg

To copy the running configuration file on an device to a file called c:\cfg\fdryhprun.cfg on the

SCP-enabled client.

C:\> scp [email protected]:runConfig c:\cfg\fdryhprun.cfg

To copy the startup configuration file on a device to a file called c:\cfg\fdryhpstart.cfg on the

SCP-enabled client.

C:\> scp [email protected]:startConfig c:\cfg\fdryhpstart.cfg

To copy the software image (for example, xmr03300b228.bin) to the primary flash.

C:\> scp c:\xmr03300b228.bin [email protected]:flash:primary

To copy the software image (for example, xmr03300b228.bin) to the secondary flash.

C:\> scp c:\xmr03300b228.bin [email protected]:flash:secondary

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 369 370

Sin comentarios

Brocade Multi-Service IronWare Security Configuration Guid Manual de usuario Pagina 277