Brocade Multi-Service IronWare Multicast Configuration Gui Manual de usuario descargar pdf (Pagina 155)

Multi-Service IronWare Multicast Configuration Guide 143

53-1003032-02

IP multicast traffic reduction

Group Specific Queries Received: 2

Others Received: 0

General Queries Sent: 0

Group Specific Queries Sent: 0

The command in this example shows the statistics for VLAN 1.

Syntax: show ip multicast vlan vlan-id statistics

Clearing IP multicast statistics

To clear IP multicast statistics on a device, enter the following command at the Privileged EXEC

level of the CLI.

Brocade# clear ip multicast statistics

This command resets statistics counters for all the VLANs to zero.

Syntax: clear ip multicast statistics

Clearing IGMP group flows

To clear all the IGMP flows learned by the device, enter the following command at the Privileged

EXEC level of the CLI.

Brocade# clear ip multicast all

The following example shows IGMP flows information listed by the show ip multicast command,

followed by removal of the information by the clear ip multicast all command.

To clear the learned IGMP flows for a specific IP multicast group, enter a command such as the

following.

Brocade# clear ip multicast vlan 1 group 239.255.162.5

Brocade# show ip multicast

IP multicast is enabled - Active

VLAN ID 1

Active 192.168.2.30 Router Ports 4/13

Multicast Group: 239.255.162.5, Port: 4/4 4/13

Multicast Group: 239.255.162.4, Port: 4/10 4/13

Brocade# clear ip multicast all

Brocade# show ip multicast

IP multicast is enabled - Active

VLAN ID 1

Active 192.168.2.30 Router Ports 4/13

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 215 216

Sin comentarios

Brocade Multi-Service IronWare Multicast Configuration Gui Manual de usuario Pagina 155