Brocade Multi-Service IronWare Multicast Configuration Gui Manual de usuario descargar pdf (Pagina 70)

58 Multi-Service IronWare Multicast Configuration Guide

53-1003032-02

Multicast Outgoing Interface (OIF) list optimization

The vrf option allows you to display RP information for the VRF instance identified by the vrf-name

variable.

The group-addr parameter is the address of a PIM Sparse IP multicast group.

Table 13 describes the output from this command.

Displaying the RP set list

To display the RP set list, enter the following command at any CLI level.

Brocade(config)# show ip pim rp-set

Static RP

---------

Static RP count: 2

1.51.51.4

1.51.51.5

Number of group prefixes Learnt from BSR: 1

Group prefix = 224.0.0.0/4 # RPs: 2

RP 1: 1.51.51.1 priority=0 age=60 holdtime=150

RP 2: 1.51.51.3 priority=0 age=30 holdtime=150

Brocade(config)#

Syntax: show ip pim [vrf vrf-name] rp-set

The vrf option allows you to display the RP set list for the VRF instance identified by the vrf-name

variable.

Table 14 describes the output from this command.

TABLE 13 Output from the show ip pim command

This field... Displays...

RP Indicates the IP address of the Rendezvous Point (RP) for the specified PIM Sparse

group, followed by the port or virtual interface through which this device learned the

identity of the RP.

Info source Indicates the IP address on which the RP information was received, followed by the IP

address through which this device learned the identity of the RP.

TABLE 14 Output from the show ip pim vrf rp-set command

This field... Displays...

Number of group prefixes The number of PIM Sparse group prefixes for which the RP is responsible.

Group prefix Indicates the multicast groups for which the RP listed by the previous field is a

candidate RP.

RPs expected or received Indicates how many RPs were expected and received in the latest bootstrap

message.

RP num Indicates the RP number. If there are multiple RPs in the PIM Sparse domain, a

line of information for each RP is listed, in ascending numerical order.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 215 216

Sin comentarios

Brocade Multi-Service IronWare Multicast Configuration Gui Manual de usuario Pagina 70