Brocade Network OS NETCONF Operations Guide v4.1.1 Manual de usuario descargar pdf (Pagina 404)

100

101

372 Network OS NETCONF Operations Guide

53-1003231-02

Configuring all xSTP on DCB interface ports

Disabling spanning tree

By default, spanning tree is disabled.

To disable spanning tree on the DCB interface, perform the following steps.

1. Issue the <edit-config> RPC to configure the interface node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the <interface> node, include the <gigabitethernet>, <tengigabitethernet>,

<fortygigabitethernet>, <hundredgigabitethernet>, or <port-channel> node element.

3. Under the <gigabitethernet>, <tengigabitethernet>, <fortygigabitethernet>,

<hundredgigabitethernet>, or <port-channel> node element, include the following elements.

a. In the <name> element, specify the interface name in [rbridge-id/]slot/port format or

port-channel number.

b. In the <shutdown> element, include the delete operation in the element tag to enable the

port.

c. Include the <spanning-tree> node element, which resides in the

urn:brocade.com:mgmt:brocade-xstp namespace.

4. Under the <spanning-tree> node, include the empty <shutdown> leaf element to disable

spanning tree on the port.

<?xml version="1.0" encoding="UTF-8"?>

<edit-config>

</target>

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<spanning-tree xmlns="urn:brocade.com:mgmt:brocade-xstp">

</spanning-tree>

</tengigabitethernet>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="2042" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 621 622

Comentarios a estos manuales

Sin comentarios

Brocade Network OS NETCONF Operations Guide v4.1.1 Manual de usuario Pagina 404

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Network OS NETCONF Operations Guide v4.1.1