Brocade FastIron Ethernet Switch Stacking Configuration Gu Manual de usuario Pagina 132

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 131
The following example shows the configuration of a mixed stack using the
automatic configuration method in which all stack members are configured from
the active controller. The mixed stack contains two ICX 6610 devices in the
backbone and two substacks of three ICX 6450 peripheral devices each.
Brocade(config)# stack unit 1
Brocade(config-unit-1)# priority 128
Brocade(config-unit-1)# peri-trunk 1/3/1 to 1/3/2
Brocade(config-unit-1)# peri-trunk 1/3/7 to 1/3/8
Brocade(config-unit-1)# stack unit 2
Brocade(config-unit-2)# module 1 icx6610-48p-poe-port-management-module
Brocade(config-unit-2)# priority 128
Brocade(config-unit-2)# peri-trunk 2/3/1 to 2/3/2
Brocade(config-unit-2)# peri-trunk 2/3/7 to
2/3/8
Brocade(config-unit-2)# stack unit 3
Brocade(config-unit-3)# module 1 icx6450-24-port-management-module
Brocade(config-unit-3)# stack-trunk 3/2/1 to 3/2/2
Brocade(config-unit-3)# stack-trunk 3/2/3 to 3/2/4
Brocade(config-unit-3)# connect 1/3/1
Brocade(config-unit-3)# connect 4/2/3
Brocade(config-unit-3)# stack unit 4
Brocade(config-unit-4)# module 1 icx6450-24p-poe-port-management-module
Brocade(config-unit-4)# stack-trunk 4/2/1 to 4/2/2
Brocade(config-unit-4)# stack-trunk 4/2/3 to 4/2/4
Brocade(config-unit-4)# connect 3/2/1
Brocade(config-unit-4)# connect 7/2/3
Brocade(config-unit-4)# stack unit 5
Brocade(config-unit-5)# module 1 icx6450-48-port-management-module
Brocade(config-unit-5)# stack-trunk 5/2/1 to 5/2/2
Brocade(config-unit-5)# stack-trunk 5/2/3 to 5/2/4
Brocade(config-unit-5)# connect
1/3/7
Brocade(config-unit-5)# connect 6/2/1
Brocade(config-unit-5)# stack unit 6
Brocade(config-unit-6)# module 1 icx6450-48-port-management-module
Brocade(config-unit-6)# stack-trunk 6/2/1 to 6/2/2
Brocade(config-unit-6)# stack-trunk 6/2/3 to 6/2/4
Brocade(config-unit-6)# connect 5/2/3
Brocade(config-unit-6)# connect 8/2/1
Brocade(config-unit-6)# stack unit 7
Brocade(config-unit-7)# module 1 icx6450-24p-poe-port-management-module
Brocade(config-unit-7)# stack-trunk 7/2/1 to 7/2/2
Brocade(config-unit-7)# stack-trunk 7/2/3 to 7/2/4
Brocade(config-unit-7)# connect 2/3/1
Brocade(config-unit-7)# connect 4/2/1
Brocade(config-unit-7)# stack unit 8
Brocade(config-unit-8)# module 1 icx6450-24p-poe-port-management-module
Brocade(config-unit-8)# stack-trunk 8/2/1 to 8/2/2
Brocade(config-unit-8)# stack-trunk 8/2/3 to
8/2/4
Brocade(config-unit-8)# connect 2/3/7
Brocade(config-unit-8)# connect 6/2/3
Brocade(config-unit-8)# stack enable
Enable stacking. This unit actively participates in stacking
Automatically configuring a standby controller device in a mixed stack
If there are two backbone devices, perform the following steps to configure the standby controller in a
mixed stack using the automatic configuration method:
1. From the ICX 6610 device that you want to be the active controller, configure the stack unit ID.
Brocade(config)# stack unit 2
2. Specify a port module.
Brocade(config-unit-2)# module 1 icx6610-24-port-management-module
Automatically configuring a standby controller device in a mixed stack
130 FastIron Ethernet Switch Stacking Configuration Guide
53-1003090-02
Vista de pagina 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 159 160

Comentarios a estos manuales

Sin comentarios