Brocade FastIron Ethernet Switch Stacking Configuration Gu Manual de usuario Pagina 135
- Pagina / 160
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1. Specify the stack unit ID.
Brocade# stack unit 1
Because you are configuring each device from the device itself, and the stack is not yet formed, the
stack unit ID is 1 for each device.
2. Specify the trunks or ports on this backbone device that connect to a peripheral device in a
substack.
Brocade(config-unit-1)# peri-port 2/3/1
Brocade(config-unit-1)# peri-port 2/3/2
Brocade(config-unit-1)# peri-port 2/3/7
Brocade(config-unit-1)# peri-port 2/3/8
Brocade(config-unit-1)# exit
3. Specify the stack unit ID that you want this device to have in the stack.
Brocade(config)# stack suggested-id 2
The system attempts to assign a device bootup ID as its stack unit ID. However, due to timing
issues or the possible unavailability of the bootup ID, a peripheral device might not get the stack
unit ID that you want. The optional stack suggested-id command allows you to specify the stack
unit ID devices other than the active controller.
4. Enable stacking.
Brocade(config)# stack enable
Manually configuring peripheral devices in a mixed stack
Perform the following steps to configure the peripheral devices in a mixed stack using the manual
configuration method.
1. Specify the stack unit ID that you want this device to have in the stack.
Brocade(config)# stack suggested-id 3
The system attempts to assign a device bootup ID as its stack unit ID. However, due to timing
issues or the possible unavailability of the bootup ID, a peripheral device might not get the stack
unit ID that you want. The optional stack suggested-id command allows you to specify the stack
unit ID devices other than the active controller.
2. Enable stacking.
Brocade(config)# stack enable
3. Repeat Step 1 and Step 2 for each additional peripheral device. Specify a different suggested stack
unit ID for each device in Step 1.
Basic mixed stacking configuration examples
Configuration example for mixed stacking using automatic
configuration
Configuration and verification examples for an automatic configuration of mixed stacking.
1. Use the show running-config command to view the mixed stack configuration.
Brocade# show running-config
2. Use the show stack command to verify the mixed stack configuration.
Brocade# show stack
Manually configuring peripheral devices in a mixed stack
FastIron Ethernet Switch Stacking Configuration Guide 133
53-1003090-02
- FastIron Ethernet Switch 1
- Contents 3
- Document conventions 7
- Notes, cautions, and warnings 8
- Brocade resources 9
- Getting technical help 9
- Document feedback 10
- About This Guide 11
- Related publications 12
- Traditional stacking overview 14
- ICX devices 15
- Stack unit roles 15
- FCX stack topologies 17
- Software requirements 26
- Extended distance stacking 34
- ICX 6450 traditional stack 47
- Logging in through the CLI 50
- Removing MAC address entries 53
- Enabling the stacking mode 57
- Reloading a stack unit 59
- Controlling stack topology 60
- Merging traditional stacks 61
- For stack member 3 only: 65
- Syntax: show memory 65
- Syntax: show chassis 66
- Syntax: show module 67
- Displaying stack information 68
- Syntax: show version 80
- Displaying stacking topology 82
- Renumbering stack units 85
- Stack mismatches 90
- Image mismatches 90
- Advanced feature privileges 91
- Auto Image Copy limitations 92
- Disabling Auto Image Copy 92
- Memory allocation failure 93
- Troubleshooting secure-setup 94
- Traditional stack topologies 96
- Port down and aging 96
- Standby controller 97
- Bootup role 97
- Hitless stacking 98
- Traditional Stacking 100
- 53-1003090-02 104
- Standby controller election 105
- Enabling hitless stacking 110
- Hitless stacking failover 111
- Hitless stacking switchover 112
- Syslog messages 120
- Mixed Stacking 123
- Mixed stacking devices 124
- Mixed stacking topologies 124
- Mixed stacking terms 125
- Brocade# show running-config 139
- Brocade# show stack 139
- How Autocopy works 141
- Stacking Commands 147
Relacionado con productos y manuales para Accesorios De Computador Brocade FastIron Ethernet Switch Stacking Configuration Gu
Accesorios De Computador Brocade FastIron Ethernet Switch Administration Guide Manual de usuario
(362 paginas)
(362 paginas)
Accesorios De Computador Brocade FastIron Ethernet Switch IP Multicast Configuratio Manual de usuario
(230 paginas)
(230 paginas)
Accesorios De Computador Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario
(396 paginas)
(396 paginas)
Accesorios De Computador Brocade ICX 7750 Hardware Installation Guide Manual de usuario
(80 paginas)
(80 paginas)
Accesorios De Computador Brocade FastIron Ethernet Switch Platform and Layer 2 Swit Manual de usuario
(454 paginas)
(454 paginas)
Accesorios De Computador Brocade Network OS Software Licensing Guide v4.1.0 Manual de usuario
(34 paginas)
(34 paginas)
Accesorios De Computador Brocade FastIron SX, FCX, and ICX Diagnostic Reference Manual de usuario
(222 paginas)
(222 paginas)
Accesorios De Computador Brocade Network OS YANG Reference Manual v4.1.1 Manual de usuario
(238 paginas)
(238 paginas)
Accesorios De Computador Brocade Network OS Feature and RFC Support Matrix Manual de usuario
(16 paginas)
(16 paginas)
Accesorios De Computador Brocade FastIron Ethernet Switch Layer 3 Routing Configura Manual de usuario
(672 paginas)
(672 paginas)
Accesorios De Computador Brocade Network OS Message Reference v4.1.1 Manual de usuario
(478 paginas)
(478 paginas)
Accesorios De Computador Brocade Mid-Mount Rack Kit (Switch) Installation Procedure Manual de usuario
(10 paginas)
(10 paginas)
Accesorios De Computador Brocade Flush Mount Rack Kit Installation Procedure (Suppo Manual de usuario
(10 paginas)
(10 paginas)
Accesorios De Computador Brocade Network OS NETCONF Operations Guide v4.1.1 Manual de usuario
(622 paginas)
(622 paginas)
Accesorios De Computador Brocade VDX 6710-54 Hardware Reference Manual Manual de usuario
(72 paginas)
(72 paginas)
Accesorios De Computador Brocade VDX 6730 QuickStart Guide (Supporting VDX 6730-32 Manual de usuario
(12 paginas)
(12 paginas)
Accesorios De Computador Brocade VDX 8770-8 Two-Post Flush and Mid-Mount Rack Kit I Manual de usuario
(8 paginas)
(8 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales