Brocade FastIron Ethernet Switch Stacking Configuration Gu Manual de usuario Pagina 148

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 147
Examples
The following example connects stack unit 3 (a peripheral device) to stack unit 1 (the active controller)
and to stack unit 4 (another peripheral device).
Brocade(config-unit-3)# connect 1/3/1
Brocade(config-unit-3)# connect 4/2/3
History
Release Command History
08.0.00a This command was introduced.
multi-peri-port
Changes both ends of a trunked link between a backbone device and a peripheral device to links
between untrunked ports.
Syntax
multi-peri-port stack-unit/slotnum/portnum and stack-unit/slotnum/portnum
no multi-peri-port stack-unit/slotnum/portnum and stack-unit/slotnum/portnum
Parameters
stack-unit
Specifies the stack unit ID.
slotnum
Specifies the slot number.
portnum
Specifies the port number in the slot.
Modes
Stack unit configuration mode
Usage Guidelines
Use this command only when the trunked link is live. The no form of this command removes the port
configuration.
Examples
The following example changes the trunked link between stack unit 1 (a backbone device) and stack
unit 3 (a peripheral device) to a link between untrunked ports.
Brocade(config-unit-1)# multi-peri-port 1/3/3 and 3/2/1
History
Release Command History
08.0.00a This command was introduced.
multi-peri-trunk
Changes both ends of an untrunked link between a backbone device and a peripheral device to links
between trunked ports.
Syntax
multi-peri-trunk stack-unit/slotnum/portnum to stack-unit/slotnum/portnum and stack-unit/slotnum/
portnum to stack-unit/slotnum/portnum
multi-peri-port
146 FastIron Ethernet Switch Stacking Configuration Guide
53-1003090-02
Vista de pagina 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 159 160

Comentarios a estos manuales

Sin comentarios