Brocade FastIron Ethernet Switch Stacking Configuration Gu Manual de usuario Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
no peri-port stack-unit/slotnum/portnum
Parameters
stack-unit
Specifies the stack unit ID.
slotnum
Specifies the slot number.
portnum
Specifies the port number in the slot.
Modes
Stack unit configuration mode
Usage Guidelines
This command can also be used to convert a port that is already configured as part of a peripheral trunk
on a backbone device to a peripheral port.
Any one backbone device supports a maximum of two single (untrunked) port connections to peripheral
devices. The no form of this command removes the port configuration.
Examples
The following example specifies that ports 1 and 2 on a backbone device connect to a peripheral device
in a substack.
Brocade(config-unit-1)# peri-port 1/3/1
Brocade(config-unit-1)# peri-port 1/3/2
History
Release Command History
08.0.00a This command was introduced.
peri-trunk
Specifies a trunk on a backbone device that connects to a peripheral device in a substack
Syntax
peri-trunk stack-unit/slotnum/portnum to stack-unit/slotnum/portnum
no peri-trunk stack-unit/slotnum/portnum to stack-unit/slotnum/portnum
Parameters
stack-unit
Specifies the stack unit ID.
slotnum
Specifies the slot number.
portnum
Specifies the port number in the slot.
Modes
Stack unit configuration mode
Usage Guidelines
This command can also be used to convert a port that is already configured as a peripheral port on a
backbone device to a peripheral trunk.
The first port in a peripheral trunk must be an odd-numbered port, for example, 1/3/1.
peri-trunk
FastIron Ethernet Switch Stacking Configuration Guide 149
53-1003090-02
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 159 160

Comentarios a estos manuales

Sin comentarios