Brocade Multi-Service IronWare Routing Configuration Guide Manual de usuario descargar pdf (Pagina 637)

100

101

Multi-Service IronWare Routing Configuration Guide 609

53-1003033-02

show ip /jointfilesconvert/1441120/bgp vpnv6 routes

Displays the BGP4+ VPNv6 routing table information for IPv4 neighbors

Syntax show ip /jointfilesconvert/1441120/bgp vpnv6 routes

Parameters None

Command

Modes

Privileged EXEC mode

Usage

Guidelines

The show ip /jointfilesconvert/1441120/bgp vpnv6 routes command displays the BGP4+ VPNv6 routing table information for

IPv4 neighbors.

Command

Output

The show ip /jointfilesconvert/1441120/bgp vpnv6 routes command displays the following information:

Output field Description

Total number of BGP

Routes

The number of BGP4+ routes the Brocade device has installed in the BGP4 route

table.

Status The route status, which can be one or more of the following:

• A – AGGREGATE.The route is an aggregate route for multiple networks.

• B – BEST. BGP4 has determined that this is the optimal route to the destination.

NOTE: If the “b” is lowercase, the software was not able to install the route in the IP

route table.

• b – NOT-INSTALLED-BEST. The routes received from the neighbor are the best

BGP4 routes to their destinations, but were not installed in the IP route table

because the device received better routes from other sources (such as OSPF, RIP,

or static IP routes).

• C – CONFED_EBGP. The route was learned from a neighbor in the same

confederation and AS, but in a different sub-AS within the confederation.

• D – DAMPED. This route has been dampened (by the route dampening feature),

and is currently unusable.

• H – HISTORY. Route dampening is configured for this route, and the route has a

history of flapping and is unreachable now.

• I – INTERNAL. The route was learned through BGP4.

• L – LOCAL. The route originated on this device.

• M – MULTIPATH. BGP4 load sharing is enabled and this route was selected as

one of the best ones to the destination. The best route among the multiple paths

also is marked with “B”.

NOTE: If the “m” is lowercase, the software was not able to install the route in the IP

route table.

• S – SUPPRESSED. This route was suppressed during aggregation and thus is not

advertised to neighbors.

Prefix The IP address and network mask of the destination network of the route.

AS_PATH The BGP AS_PATH path attribute.

Next Hop The IP address of the next-hop router.

MED The Multi-exit Discriminator (MED) associated with the route. The MED applies to

routes that have multiple paths through the same AS. The best route is the route with

the lowest MED.

1 2 ... 632 633 634 635 636 637 638 639 640 641 642 ... 845 846

Comentarios a estos manuales

Sin comentarios

Brocade Multi-Service IronWare Routing Configuration Guide Manual de usuario Pagina 637

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Multi-Service IronWare Routing Configuration Guide