Brocade Multi-Service IronWare Routing Configuration Guide Manual de usuario descargar pdf (Pagina 786)

100

101

758 Multi-Service IronWare Routing Configuration Guide

53-1003033-02

Displaying RIPng information

Displaying RIPng routing table for a VRF instance

To display the RIPng route information for a specified VRF, enter the following command at any CLI

level.

Syntax: show ipv6 rip [vrf vrf-name] route [ipv6-prefix/prefix-length | ipv6-address]

Source of route The source of the route information. The source can be one of the following:

• RIP – routes learned by RIPng.

• CONNECTED – IPv6 routes redistributed from directly connected

networks.

• STATIC – IPv6 static routes are redistributed into RIPng.

• BGP – BGP4+ routes are redistributed into RIPng.

• IS-IS – IPv6 IS-IS routes are redistributed into RIPng.

• OSPF – OSPFv3 routes are redistributed into RIPng.

Metric number The cost of the route. The number parameter indicates the number of hops

to the destination.

Tag number The tag value of the route.

Timers: Indicates if the hold-down timer or the garbage-collection timer is set.

TABLE 165 RIPng routing table fields

This field... Displays...

Brocade# show ipv6 vrf red route

IPv6 RIP Routing Table - 4 entries:

2001:db8::/64, from ::, null (0)

CONNECTED, metric 1, tag 0, timers: none

2001:db8:46a::/64, from ::, null (1)

CONNECTED, metric 1, tag 0, timers: none

2001:db8::1/128, from ::, null (2)

CONNECTED, metric 1, tag 0, timers: none

2001:db8:2::/64, from ::, null (3)

CONNECTED, metric 1, tag 0, timers: none

1 2 ... 781 782 783 784 785 786 787 788 789 790 791 ... 845 846

Comentarios a estos manuales

Sin comentarios

Brocade Multi-Service IronWare Routing Configuration Guide Manual de usuario Pagina 786

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Multi-Service IronWare Routing Configuration Guide