Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
Trunk formation with PBR policy
PBR can be applied on trunk primary port ,only if the port is untagged. When a trunk is formed, the PBR
policy on the primary port applies to all the secondary ports. If a different PBR policy exists on a
secondary port at the time of a trunk formation, that policy is overridden by the PBR policy on the
primary port. If the primary port does not have a PBR policy, then the secondary ports will not have a
PBR policy.
When a trunk is removed, the PBR policy that was applied to the trunk interface is unbound (removed)
from former secondary ports. If global PBR is configured, the secondary ports adhere to the global PBR;
otherwise, no PBR policy is bound to former secondary ports.
Trunk formation with PBR policy
FastIron Ethernet Switch Security Configuration Guide 151
53-1003088-03
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 395 396

Comentarios a estos manuales

Sin comentarios