Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 278

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 277
Authentication attempts : 0
RADIUS timeouts : 0
RADIUS timeouts action : Success
MAC Address on PVID : 1
MAC Address authorized on PVID : 1
Aging of MAC-sessions : Enabled
Port move-back vlan : Port-configured-vlan
Max-Age of sw mac session : 120 seconds
hw age for denied mac : 70 seconds
MAC Filter applied : No
Dynamic ACL applied : No
num Dynamic Tagged Vlan : 2
Dynamic Tagged Vlan list : 1025 (1/1) 4060 (1/0)
------------------------------------------------------------------------------
MAC Address RADIUS Server Authenticated Time Age Dot1x
------------------------------------------------------------------------------
0000.0074.3181 10.12.12.5 Yes 00d01h03m17s Ena Ena
The following table describes the information displayed by the show auth-mac-addresses detailed
command.
Output from the show auth-mac-addresses detailed commandTABLE 33
Field Description
Port The port to which this information applies.
Dynamic-Vlan Assignment Whether RADIUS dynamic VLAN assignment has been enabled for the port.
RADIUS failure action What happens to traffic from a MAC address for which RADIUS authentication has
failed either block the traffic or assign the MAC address to a restricted VLAN.
Failure restrict use dot1x Indicates if 802.1x traffic that failed multi-device port authentication, but succeeded
802.1x authentication to gain access to the network.
Override-restrict-vlan Whether a port can be dynamically assigned to a VLAN specified by a RADIUS
server, if the port had been previously placed in the restricted VLAN because a
previous attempt at authenticating a MAC address on that port failed.
Port Default Vlan The VLAN to which the port is assigned, and whether the port had been
dynamically assigned to the VLAN by a RADIUS server.
Port VLAN state Indicates the state of the port VLAN. The State can be one of the following
"Default", "RADIUS Assigned" or "Restricted".
802.1X override Dynamic
PVID
Indicates if 802.1X can dynamically assign a Port VLAN ID (PVID).
override return to PVID If a port PVID is assigned through the multi-device port authentication feature, and
802.1X authentication subsequently specifies a different PVID, then the PVID
specified through 802.1X authentication overrides the PVID specified through
multi-device port authentication. This line indicates the PVID the port will use if
802.1X dynamically assigns PVID.
Original PVID The originally configured (not dynamically assigned) PVID for the port.
DOS attack protection Whether denial of service attack protection has been enabled for multi-device port
authentication, limiting the rate of authentication attempts sent to the RADIUS
server.
Multi-Device Port Authentication
278 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03
Vista de pagina 277
1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 395 396

Comentarios a estos manuales

Sin comentarios