Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario descargar pdf (Pagina 259)

Multi-device port authentication configuration

Configuring multi-device port authentication on the Brocade device consists of the following tasks:

• Enabling multi-device port authentication globally and on individual interfaces

• Specifying the format of the MAC addresses sent to the RADIUS server (optional)

• Specifying the authentication-failure action (optional)

• Enabling and disabling SNMP traps for multi-device port authentication

• Defining MAC address filters (optional)

• Configuring dynamic VLAN assignment (optional)

• Dynamically Applying IP ACLs to authenticated MAC addresses

• Enabling denial of service attack protection (optional)

• Clearing authenticated MAC addresses (optional)

• Disabling aging for authenticated MAC addresses (optional)

• Configuring the hardware aging period for blocked MAC addresses

• Specifying the aging time for blocked MAC addresses (optional)

Enabling multi-device port authentication

To enable multi-device port authentication, you first enable the feature globally on the device. On some

Brocade devices, you can then enable the feature on individual interfaces.

Globally enabling multi-device port authentication

To globally enable multi-device port authentication on the device, enter the following command.

device(config)#mac-authentication enable

Syntax: [no] mac-authentication enable

Enabling multi-device port authentication on an interface

To enable multi-device port authentication on an individual interface, enter a command such as the

following.

device(config)#mac-authentication enable ethernet 3/1

Syntax: [no] mac-authentication enable [ port | all ]

The all option enables the feature on all interfaces at once.

You can enable the feature on an interface at the interface CONFIG level.

of enabling multi-device port authentication on an interface

device(config)#interface e 3/1

device(config-if-e1000-3/1)#mac-authentication enable

Syntax: [no] mac-authentication enable

You can also configure multi-device port authentication commands on a range of interfaces.

of enabling multi-device port authentication on a range of interfaces

Multi-device port authentication configuration

FastIron Ethernet Switch Security Configuration Guide 259

53-1003088-03

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 395 396

Sin comentarios

Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 259