Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario descargar pdf (Pagina 33)

on the order you specify in the authentication-method lists. Refer to Authentication-method lists on page

75.

Follow the steps given below to set passwords for management privilege levels.

1. At the opening CLI prompt, enter the following command to change to the Privileged level of the

EXEC mode.

device> enable

device#

2. Access the CONFIG level of the CLI by entering the following command.

device#configure terminal

device(config)#

3. Enter the following command to set the Super User level password.

device(config)#enable super-user-password text

NOTE

You must set the Super User level password before you can set other types of passwords. The

Super User level password can be an alphanumeric string, but cannot begin with a number.

4. Enter the following commands to set the Port Configuration level and Read Only level passwords.

device(config)#enable port-config-password text

device(config)#enable read-only-password text

Syntax: enable super-user-password text

Syntax: enable port-config-password text

Syntax: enable read-only-password text

NOTE

If you forget your Super User level password, refer to Recovering from a lost password on page 34.

Augmenting management privilege levels

Each management privilege level provides access to specific areas of the CLI by default:

• Super User level provides access to all commands and displays.

• Port Configuration level gives access to:

‐ The User EXEC and Privileged EXEC levels

‐ The port-specific parts of the CONFIG level

‐ All interface configuration levels

• Read Only level gives access to:

‐ The User EXEC and Privileged EXEC levels

You can grant additional access to a privilege level on an individual command basis. To grant the

additional access, you specify the privilege level you are enhancing, the CLI level that contains the

command, and the individual command.

NOTE

This feature applies only to management privilege levels on the CLI.

Augmenting management privilege levels

FastIron Ethernet Switch Security Configuration Guide 33

53-1003088-03

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 395 396

Sin comentarios

Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 33