Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario descargar pdf (Pagina 91)

Displaying SSH connection information

To display information about SSH connections, enter the show ip ssh command.

device#show ip ssh

Connection Version Encryption Username HMAC Server Hostkey IP Address

Inbound:

1 SSH-2 3des-cbc Raymond hmac-sha1 ssh-dss 10.120.54.2

Outbound:

6 SSH-2 aes256-cbc Steve hmac-sha1 ssh-dss 10.37.77.15

SSH-v2.0 enabled; hostkey: DSA(1024), RSA(2048)

Syntax: show ip ssh [ begin expression | exclude expression | include expression ]

This display shows the following information about the active SSH connections.

SSH connection information TABLE 10

Field Description

Inbound Connections listed under this heading are inbound.

Outbound Connections listed under this heading are outbound.

Connection The SSH connection ID.

Version The SSH version number.

Encryption The encryption method used for the connection.

Username The user name for the connection.

HMAC The HMAC version

Server Hostkey The type of server hostkey. This can be DSA or RSA.

IP Address The IP address of the SSH client

SSH-v2.0 enabled Indicates that SSHv2 is enabled.

hostkey Indicates that at least one host key is on the device. It is followed by a list of the the host key

types and modulus sizes.

Displaying SSH configuration information

To display SSH configuration information, use the show ip ssh config command:

Brocade# show ip ssh config

SSH server : Disabled

SSH port : tcp\22

Host Key :

Encryption : AES-256, AES-192, AES-128, 3-DES

Permit empty password : No

Authentication methods : Password, Public-key, Interactive

Authentication retries : 3

Idle timeout (minutes) : 0

Displaying SSH connection information

FastIron Ethernet Switch Security Configuration Guide 91

53-1003088-03

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 395 396

Sin comentarios

Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 91