Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 380

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 379
Hit Count: (1Min) N/A (5Sec) N/A
(PktCnt) N/A (ByteCnt) 0
---------------------------------------------------------------
The following sample output shows an Ethernet interface that has a MAC filter applied and ACL
accounting enabled.
device#show access-list accounting ethernet 3/1/2 in
MAC Filters Accounting Information
0: DA ANY SA 0000.0000.0001 - MASK FFFF.FFFF.FFFF
action to take : DENY
Hit Count: (1Min) 0 (5Sec) 0
(PktCnt) 0 (ByteCnt) 0
-----------------------------------------------------------------
65535: Implicit Rule deny any any
Hit Count: (1Min) 5028 (5Sec) 2129
(PktCnt) 5028 (ByteCnt) 643584
------------------------------------------------------------------
History
Release version Command history
08.0.10 This command was introduced.
show ipv6 raguard
Displays the RA guard policy configuration.
Syntax
show ipv6 raguard { name | all }
Parameters
name
Displays the configuration of the specified RA guard policy.
all
Displays the configuration of all RA guard policies.
Modes
Privileged EXEC
Examples
The following example shows how to display the RA guard policy configurations:
Brocade#show ipv6 raguard all
policy:policy1
whitelist:1
max_pref:medium
policy:policy2
whitelist:0
show ipv6 raguard counts
Displays the RA guard drop or permit counts.
Syntax
show ipv6 raguard counts { name | all }
Parameters
name
show ipv6 raguard
380 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03
Vista de pagina 379
1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 395 396

Comentarios a estos manuales

Sin comentarios