Brocade FastIron Ethernet Switch Security Configuration Gu Manual de usuario Pagina 283

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 282
mac-authentication auth-fail-action restrict-vlan
mac-authentication enable-dynamic-vlan
mac-authentication disable-ingress-filtering
The mac-authentication disable-ingress-filtering command enables tagged packets on the port,
even if the port is not a member of the VLAN. If this feature is not enabled, authentication works as in
Example 2 -- multi-device port authentication with dynamic VLAN assignment on page 283
Example 2 -- multi-device port authentication with dynamic VLAN assignment
The following figure illustrates multi-device port authentication with dynamic VLAN assignment on a
Brocade device. In this configuration, a PC and an IP phone are connected to a hub, which is
connected to port e1 on a Brocade device. Port e1 is configured as a dual-mode port. The profile for the
PC MAC address on the RADIUS server specifies that the PC should be dynamically assigned to VLAN
102, and the RADIUS profile for the IP phone specifies that it should be dynamically assigned to VLAN
3.
Example 2 -- multi-device port authentication with dynamic VLAN assignment
FastIron Ethernet Switch Security Configuration Guide 283
53-1003088-03
Vista de pagina 282
1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 395 396

Comentarios a estos manuales

Sin comentarios