Brocade Multi-Service IronWare Switching Configuration Gui Manual de usuario descargar pdf (Pagina 333)

100

101

Multi-Service IronWare Switching Configuration Guide 303

53-1003036-02

802.1ag over PBB OAM

Priority: 3

MEP Direction MAC PORT PORT-STATUS-TLV

==== ======== ========= ===== ===============

10 DOWN 0012.f2f7.3900 ethe 1/1 N

Brocade#show cfm connectivity

Domain: D10 Index: 3

Level: 7

Maintenance association: MA

MA Index: 1

CCM interval: 10000 ms

LINK MA ID: 0

Priority: 3

RMEP MAC VLAN/PEER AGE PORT SLOTS STATE

==== ========== =========== ===== ===== ===== =======

1 0012.f2f7.3861 0 54020 1/1 1 OK

802.1ag for CVLAN and SVLAN

Brocade supports MEP and MIP for the regular VLAN and MEP for VPLS VLAN.

You will need to create a new MA for PBB-VPLS. SVLAN functionality is supported in a similar

manner as it is with CVLAN functionality. The only difference is the tag-type configuration for the

VPLS end-points.

Syntax: ma-name MANAME {vlan-id vlan-id | vpls-id vpls-id | pbb-vpls vpls-id | [vll

[vll-name]|[vll-id]|vll-local [vll-name] } priority priority

Example

Brocade(config- dot1ag -DONAME)# ma-name MANAME pbb-vpls 10 priority 4

Both down MEP and UP MEP configuration are accepted for CVLAN and SVLAN.

Syntax: mep mep-id [ up | down ] [ vlan vlan-id port port-id | port port-id ]

• UP MEP for CVLAN and SVLAN will transmit CCM packets on C-tagged, S-tagged and IB-tagged

end-points on the service instance.

• MIP will take care of CVLAN/SVLAN translation and MIP is created on C-tagged and S-tagged

end-points.

• 802.1ag sub-second-timer functionality is supported for PBB CVLAN/SVLAN.

• 802.1ag functionality for PBB CVLAN/SVLAN is supported during switch-over.

• 802.1ag functionality is not supported during hitless upgrade for PBB CVLAN/SVLAN.

• 802.1ag functionality is supported if the PBB CVLAN/SVLAN end-point is a LAG.

• Link-trace, loopback and delay-measurement for PBB CVLAN/SVLAN is supported.

• 802.1ag for CVLAN/SVLAN is supported on untagged end-points, port based untagged

end-points and C-tagged end-points.

• 802.1ag for CVLAN/SVLAN is not supported on dual-tagged end-points.

• SVLAN keep-mode is supported.

• When MEP is configured on a VPLS instance with sub-second CCM timer, the MIP flooding

should be turned off. When there is no MEP and it is a sub-second-timer, then dot1ag flooding

should be turned on.

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 983 984

Comentarios a estos manuales

Sin comentarios

Brocade Multi-Service IronWare Switching Configuration Gui Manual de usuario Pagina 333

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Multi-Service IronWare Switching Configuration Gui