Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario descargar pdf (Pagina 106)

100

101

96 Brocade Mobility Access Point System Reference Guide

53-1003100-01

6. If required, select a radio configuration and select the Edit button to modify the radio

configuration.

FIGURE 24 Access Point Radio - Radio Settings tab

7. Th e Radio Settings tab displays by default.

Admin Status

A red “X” defines the radio’s status as currently disabled. A green check mark designates the

status as enabled.

RF Mode

Displays whether each listed radio is operating in the 802.11a/n or 802.11b/g/n radio band. If the

radio is a dedicated sensor, it will be listed as a sensor to define the radio as not providing typical

WLAN support. If the radio is a client-bridge, it will be listed as a client bridge and does not provide

typical WLAN support. The radio band is set from within the Radio Settings tab.

Channel

Lists the channel setting for the radio. Smart is the default setting. If set to Smart, the access point

scans non-overlapping channels listening for beacons from other access points. After the channels

are scanned, it selects the channel with the fewest access points. In the case of multiple access

points on the same channel, it will select the channel with the lowest average power level.

Transmit Power

Lists the transmit power for each radio. The column displays smart if set for dynamic Smart RF

support.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 853 854

Comentarios a estos manuales

Sin comentarios

Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 106

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp