Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario descargar pdf (Pagina 424)

100

101

414 Brocade Mobility Access Point System Reference Guide

53-1003100-01

FIGURE 8 WLAN Security - WEP 128 screen

7. Configure the following WEP 128 or Keyguard settings:

Default WEP 128 or Keyguard keys are as follows:

• Key 1 101112131415161718191A1B1C

• Key 2 202122232425262728292A2B2C

• Key 3 303132333435363738393A3B3C

• Key 4 404142434445464748494A4B4C

8. Select OK when completed to update the WLAN’s WEP 128 encryption configuration. Select

Reset to revert the screen back to its last saved configuration.

WEP 128 and Keyguard Deployment Considerations

WEP 128 and KeyGuard

Generate Keys

Specify a 4 to 32 character pass key and select the Generate button. The pass key can be any

alphanumeric string. The access point, other proprietary routers, and Brocade clients use the

algorithm to convert an ASCII string to the same hexadecimal number. Clients without Brocade

adapters need to use WEP keys manually configured as hexadecimal numbers.

Keys 1-4

Use the Key #1-4 areas to specify key numbers. For WEP 128 (104-bit key), the keys are 26

hexadecimal characters in length. Select one of these keys for default activation by selecting its

radio button. Select Show to display the actual characters comprising the key.

Restore Default WEP Keys

If you feel it necessary to restore the WEP algorithm back to its default settings, select the Restore

Default WEP Keys

button.

1 2 ... 419 420 421 422 423 424 425 426 427 428 429 ... 853 854

Comentarios a estos manuales

Sin comentarios

Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 424

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp