Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 660

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 854
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 659
650 Brocade Mobility Access Point System Reference Guide
53-1003100-01
12
FIGURE 14 Device - Reload screen
Refer the following for more information on this screen:
Locating a Device
Devices
In large deployments with a large number of devices, it is very hard to identify a specific device. Use
the device’s locator feature to find the device. Once configured, the device blinks its LEDs in a color
that enables it to be identified amongst all other deployed devices.
To locate a device:
Force Reload
Select this option to force this device to reload. Use this option for devices that
are unresponsive and do not reload normally.
Delay
Use the spinner to configure a delay in seconds before the device is reloaded.
Set this value to 0 to reload the device immediately.
Description
Use the text box to provide a brief description detailing the reason to reload this
device.
Current Boot
Displays the current running firmware. Displays either primary or secondary.
Current Boot Version
Displays the firmware version number for the running firmware.
Next Boot
Displays the firmware that will be loaded on next boot.
Next Boot Version
Displays the firmware version number that will be loaded on next boot.
Fallback
Displays the status of Fallback. Displays Enabled or Disabled.
Vista de pagina 659
1 2 ... 655 656 657 658 659 660 661 662 663 664 665 ... 853 854

Comentarios a estos manuales

Sin comentarios