Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario descargar pdf (Pagina 433)

100

101

Brocade Mobility Access Point System Reference Guide 423

53-1003100-01

FIGURE 14 WLAN - Client Settings screen

4. Define the following Client Settings for the WLAN:

Enable

Client-to-Client

Communication

Select this option to allow client to client communication within this WLAN. The default is enabled,

meaning clients are allowed to exchange packets with other clients. Disabling this setting does not

necessarily prevent clients on other WLANs from sending packets to this WLAN, but as long as this

setting is disabled on the other WLAN, clients are not permitted to interoperate.

Wireless Client Power

Use this parameter to set the maximum transmit power (from 0 - 20 dBm) available to wireless

clients for transmission. The default value is 20 dBm.

Wireless Client Idle Time

Set the maximum amount of time wireless clients are allowed to be idle within this WLAN. Set the

idle time in either Seconds (60 - 86,400), Minutes (1 - 1,440), Hours

(0 - 24) or Days (0 - 1). When this setting is exceeded, the client is no longer able to access

resources and must re-authenticate. The default value is 1,800 seconds.

Max Firewall Sessions per

Client

Select this option to set the maximum number of sessions (from 10 - 10,000 clients) over the

Firewall. When enabled, this parameter limits the number of simultaneous sessions allowed by the

Firewall per wireless client. This feature is disabled by default.

1 2 ... 428 429 430 431 432 433 434 435 436 437 438 ... 853 854

Comentarios a estos manuales

Sin comentarios

Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 433

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp