Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario descargar pdf (Pagina 372)

100

101

362 Brocade Mobility Access Point System Reference Guide

53-1003100-01

3. Select the Add button at the bottom of the screen to add a new critical resource and

connection method, or select and existing resource and select Edit to update the resource’s

configuration.

FIGURE 200 Device Overrides - Critical Resources screen - Adding a Critical Resource

4. Use the Offline Resource Detection drop-down menu to define how critical resource event

messages are generated. Options include Any and All. If selecting Any, an event is generated

when the state of any single critical resource changes. If selecting All, an event is generated

when the state of all monitored critical resources change.

Select the IP option (within the Monitor Via field at the top of the screen) to monitor a critical

resource directly (within the same subnet) using the provided critical resource IP address as a

network identifier.

5. Select the Interface option (within the Monitor Via field at the top of the screen) to monitor a

critical resource using either the critical resource’s VLAN, WWAN1 or PPPoE1 interface. If VLAN

is selected, a spinner control is enabled to define the destination VLAN ID used as the

interface for the critical resource.

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 853 854

Comentarios a estos manuales

Sin comentarios

Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 372

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp