Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 182

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 854
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 181
172 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
Define the following IKE Dead Peer Detection settings:
Select OK to save the updates made to the Global Settings screen. Selecting Reset reverts the
screen to its last saved configuration.
Auto IPSec Tunnel
Profile Security Configuration
IPSec tunnels are established to secure traffic, data and management traffic, from access points
to remote wireless controllers. Secure tunnels must be established between access points and the
wireless controller with minimum configuration pushed through DHCP option settings.
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Security menu and select Auto IPSec Tunnel.
FIGURE 72 Profile Security – Auto IPSec Tunnel screen
DPD Keep Alive
Define the interval (or frequency) of IKE keep alive messages for dead peer detection. Options
include Seconds (10 - 3,600), Minutes (1 - 60) and Hours (1). The default setting is 30 seconds.
DPD Retries
Use the spinner control to define the number of keep alive messages sent to an IPSec VPN client
before the tunnel connection is defined as dead. The available range is from 1 - 100. The default
number of messages is 5.
NAT Keep Alive
Define the interval (or frequency) of NAT keep alive messages for dead peer detection. Options
include Seconds (10 - 3,600), Minutes (1 - 60) and Hours (1). The default setting is 20 seconds.
Cookie Challenge Threshold
Use the spinner control to define the threshold (1 - 100) that, when exceeded, enables the cookie
challenge mechanism.
Crypto NAT Pool
Use the drop-down menu to select the NAT pool for internal source NAT for IPSec tunnels.
Vista de pagina 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 853 854

Comentarios a estos manuales

Sin comentarios