Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario Pagina 275

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 854
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 274
Brocade Mobility Access Point System Reference Guide 265
53-1003100-01
5
FIGURE 134 Device Overrides – Virtual Interfaces Dynamic Routing screen
Refer to the following to configure OSPF Settings.
Configure the OSPF Authentication Type settings by selecting from the drop-down list. The available
options are None, null, simple-password and message-digest.
Priority
Select this option to enable or disable OSPF priority settings. Use the spinner to configure a value
from 0 - 255. This option sets the priority of this interface becoming the Designated Router (DR) for
the network. DRs provide routing updates to the network by maintaining a complete topology table of
the network and sends the updates to the other routers in the network using multicast. Setting a high
value increases the chance of this interface becoming a DR. Setting this value to Zero (0) prevents
this interface from being elected a DR.
Cost
Select this option to enable or disable OSPF cost settings. Use the spinner to configure a cost value
from 1 - 65535. Use this option to set the OSPF cost of this interface. OSPF cost is the overhead
required to send a packet over this interface.
Bandwidth
Select this option to enable or disable OSPF bandwidth settings. Use the spinner to configure a
bandwidth settings from 1 - 10,000,000 KBps. Use this option to set the bandwidth of this interface
in KBps.
Vista de pagina 274
1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 853 854

Comentarios a estos manuales

Sin comentarios