Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 183
- Pagina / 607
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Brocade Mobility RFS7000-GR Controller CLI Reference Guide 169
53-1001945-01
Chapter
5Global Configuration Commands
In this chapter
•Global Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
The term global is used to indicate characteristics or features effecting the system as a whole. Use
the global configuration mode to configure the system globally, or enter specific configuration
modes to configure specific elements (such as interfaces or protocols). Use the configure terminal
command, under PRIV EXEC, to enter the global configuration mode.
The example below describes how to enter the global configuration mode from the privileged EXEC
mode:
RFS7000# configure terminal
RFS7000(config)#
NOTE
The system prompt changes to indicate that you are in global configuration mode. The prompt for
global configuration mode consists of the host-name of the device followed by (config) and the
pound sign (#).
Commands entered in the global configuration mode update the running configuration file as soon
as they are entered. However, these changes are not saved in the startup configuration file until a
copy running-config startup-config EXEC mode command is issued.
Global Configuration Commands
The following table summarizes the Global Config commands.
Table 5.2 Global Configuration command summary
Command Description Ref.
aaa Authentication, Authorization and Accounting. page 171
access-banner Creates custom access banner for the switch. page 172
access-list Adds an access list entry. page 173
audit-log-filter Audits events log filters. page 177
audit-wireless-filter Audits wireless log filters. page 178
boot Reboots the switch. page 179
bridge Bridges group commands. page 180
clrscr Clears the display screen. page 20
common-criteria Enables or disables logging of commands that do not meet common criteria. page 181
country-code Configures the country of operation. This erases all existing radio configuration. page 182
crypto Encryption related commands. page 183
- Brocade Mobility 1
- RFS7000-GR Controller 1
- 3 User Exec Commands 107 4
- 8 Crypto-peer Instance 261 6
- 9 Crypto-ipsec Instance 271 6
- 10 Crypto-map Instance 281 6
- 12 Interface Instance 311 6
- 19 RADIUS Server Instance 449 9
- 20 Wireless Instance 483 9
- 21 RTLS Instance 559 10
- 22 SOLE Instance 579 10
- About This Document 11
- Annotated Symbols 12
- Notational Conventions 13
- 1Introduction 15
- Name Assumption 16
- CLI Overview 24
- Command Description 26
- Deleting Entries 30
- Command Output Pagination 30
- Controlling Capitalization 31
- 2Common Commands 33
- RFS7000#clrscr 34
- RFS7000(config)#exit 35
- Common commands 39
- Example (Others) 39
- Syntax (User Exec) 40
- Syntax (Priv Exec) 44
- Parameters(Global Config) 47
- IP routing status 68
- Secured Shell (SSH) server 68
- RFS7000(config)#show licenses 72
- 000 msec, dispersion 0.00 80
- RFS7000>show privilege 82
- 53-1001945-01 100
- Common to all modes 102
- Parameters 102
- <1300-1999> 103
- <2000-2699> 103
- <1-99> 103
- <100-199> 103
- Privilege / Global Config 110
- 3User Exec Commands 121
- RFS7000>enable 126
- [IP address 129
- User Exec Commands 132
- 4Privileged Exec Commands 137
- Priv Exec Command 138
- Priv Exec Command Summary 138
- Which files are tared? 140
- Untar fails..? 140
- RFS7000#show clock 146
- Sep 08 15:10:31 UTC 2006 146
- • flash:/path/file 149
- • nvram:startup-config 149
- • system:running-config 149
- RFS7000#disable 153
- RFS7000> 153
- RFS7000#mkdir TestDIR 160
- RFS7000# 160
- Directory name 160
- RFS7000#quit 165
- RFS7000 version 4.1.0.0-040GR 165
- RFS7000 login: 165
- RFS7000#reload 166
- Usage Guidelines 177
- Global Configuration Commands 184
- Eldorado(config)# 203
- Usage Guidelines 1 207
- Primary terminal line 211
- RFS7000(config)# 212
- (extended <name>) 216
- • 0 – Disables aging 217
- <1-1024> 227
- RFS7000(config)#wireless 247
- RFS7000(config-wireless)# 247
- <1-256>[] 248
- 6Crypto-isakmp Instance 251
- Diffie-Hellman group 2 257
- Diffie-Hellman group 5 257
- <seconds> 260
- 7Crypto-group Instance 265
- RFS7000(config-crypto-group)# 266
- <IP Address> 267
- Crypto Group Config Commands 273
- <A.B.C.D> 274
- 8Crypto-peer Instance 275
- RFS7000(config-crypto-peer) 276
- RFS7000(config-crypto-peer)# 280
- 9Crypto-ipsec Instance 285
- RFS7000(config-crypto-ipsec) 286
- RFS7000(config-crypto-ipsec)# 290
- Transpor t mode 290
- Tunnel mode 290
- Crypto IPSec Config Commands 294
- 10Crypto-map Instance 295
- RFS7000(config-crypto-map) 296
- (address) <list name> 300
- RFS7000(config-crypto-map)# 301
- Negates match values 301
- Crypto Map Config Commands 308
- 11Crypto-trustpoint Instance 309
- RFS7000(config-trustpoint)# 310
- Trustpoint Config commands 323
- RFS7000(config-if)#clrscr 326
- RFS7000(config-if)# 326
- Interface Config commands 333
- Sets MAC access groups ACL 334
- RFS7000(config-if)#management 335
- <512-1500> 336
- (config-if) 339
- RFS7000(config-if)#shutdown 342
- <1-4094> 347
- <1-4094 347
- <1-255> 349
- 13Spanning tree-mst Instance 351
- RFS7000(config-mst)#clrscr 352
- RFS7000(config-mst)# 352
- MST region name 357
- 14Extended ACL Instance 365
- RFS7000(config-ext-nacl)# 366
- Extended ACL Config Commands 367
- RFS7000(config-ext-nacl)#exit 372
- 15Standard ACL Instance 387
- RFS7000(config-std-nacl)# 388
- A.B.C.D/M 389
- RFS7000(config-std-nacl)#end 390
- RFS7000(config-std-nacl)#exit 391
- Standard ACL Config Commands 398
- 16Extended MAC ACL Instance 399
- RFS7000(config-ext-macl)# 400
- <0-7> 401
- <1-5000> 401
- <1-4095> 401
- • 802.1q 402
- (config-if) instance 411
- TABLE 13 DHCP config commands 416
- IP Address) 421
- RFS7000(config-dhcpclass)# 422
- <ascii stringWORD> 425
- \\0 at beginning. A single 425
- \ in the input is ignored 425
- RFS7000(config-dhcp)# 426
- RFS7000(config-dhcp)#clrscr 427
- [XX-XX-XX-XX-XX-XX 434
- XX:XX:XX:XX:XX:XX] 434
- 437
- <IP address> 438
- • b-node – Broadcast node 439
- • h-node – Hybrid node 439
- • m-node – Mixed node 439
- • p-node – Peer-to-peer node 439
- [A.B.C.D 440
- (config-dhcp) 444
- RFS7000(config-dhcpclass)#end 453
- Undo DHCP Server options 457
- WID, using (config)# mode 458
- (user classname) 458
- RFS7000(config-radsrv)#clrscr 466
- RFS7000(config-radsrv)# 466
- Enables a CRL check 467
- Command Description Ref 470
- RFS7000(config-radsrv-group)# 471
- (config-radsrv)) 473
- RADIUS group name 474
- Example–Creating a Group 484
- RADIUS Configuration Commands 485
- (0 492
- Trustpoint configuration 493
- (config-radsrv) 494
- 20Wireless Instance 497
- <1-65535> 502
- IP address 508
- Lists the channels 509
- Load balance by user account 524
- TestString zone 1 526
- <0-20> 534
- wired-to-wireless 537
- <0-30> 542
- – Multicast MAC address 543
- <1-256> 550
- RFS7000(config-wireless)#show 555
- <100-5000> 561
- <1-10> 561
- [<1-4094> 568
- <AA-BB-CC-DD-EE-FF> 574
- RFSwitch(config-rtls)#clrscr 577
- RFSwitch(config-rtls)# 577
- RFSwitch# 578
- RFSwitch(config)# 579
- <MACAA-BB-CC-DD-EE-FF> 581
- RFID tag filter 582
- RTLS Config Commands 583
- RFSwitch(config-rtls)#sole 590
- RFSwitch(config-rtls-sole)# 590
- <-90.00 - 90.00> 591
- SOLE Config Commands 594
- RFS7000 (config)# 597
Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility RFS7000-GR Controller CLI Reference Guide
Accesorios De Computador Brocade Mobility 5181 Access Point Product Reference Guide Manual de usuario
(428 paginas)
(428 paginas)
Accesorios De Computador Brocade Mobility 1240 Access Point Installation Guide Manual de usuario
(68 paginas)
(68 paginas)
Accesorios De Computador Brocade Mobility 7131N-FGR Access Point Product Reference Manual de usuario
(593 paginas)
(593 paginas)
Accesorios De Computador Brocade Mobility 7131 Access Point Product Reference Guide Manual de usuario
(520 paginas)
(520 paginas)
Accesorios De Computador Brocade Mobility 1220 Access Point Installation Guide Manual de usuario
(63 paginas)
(63 paginas)
Accesorios De Computador Brocade Mobility Access Point System Reference Guide (Supp Manual de usuario
(854 paginas)
(854 paginas)
Accesorios De Computador Brocade Enterprise Wireless LAN Antenna Specification Guid Manual de usuario
(158 paginas)
(158 paginas)
Accesorios De Computador Brocade Virtual ADX Switch and Router Guide (Supporting AD Manual de usuario
(374 paginas)
(374 paginas)
Accesorios De Computador Brocade Virtual ADX Security Guide (Supporting ADX v03.1.0 Manual de usuario
(180 paginas)
(180 paginas)
Accesorios De Computador Brocade Virtual ADX OpenScript Programmer’s Guide (Support Manual de usuario
(30 paginas)
(30 paginas)
Accesorios De Computador Brocade Virtual ADX OpenScript API Guide (Supporting ADX v Manual de usuario
(132 paginas)
(132 paginas)
Accesorios De Computador Brocade Virtual ADX Server Load Balancing Guide (Supportin Manual de usuario
(408 paginas)
(408 paginas)
Accesorios De Computador Brocade Virtual ADX XML API Programmer’s Guide (Supporting Manual de usuario
(878 paginas)
(878 paginas)
Accesorios De Computador Brocade Virtual ADX Licensing Guide (Supporting ADX v03.1. Manual de usuario
(20 paginas)
(20 paginas)
Accesorios De Computador Brocade Virtual ADX Installation and Deployment Guide (Sup Manual de usuario
(78 paginas)
(78 paginas)
Accesorios De Computador Brocade Virtual ADX Global Server Load Balancing Guide (Su Manual de usuario
(198 paginas)
(198 paginas)
Accesorios De Computador Brocade Virtual Connect Enterprise Manager Server Guide (S Manual de usuario
(1 paginas)
(1 paginas)
Accesorios De Computador Brocade Virtual ADX Administration Guide (Supporting ADX v Manual de usuario
(142 paginas)
(142 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales