
528 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
self-heal-offset
<0-30>
Configures the self healing offset, measured in dBm, for regulatory.
NOTE: This offset is based off the regulatory maximum power for the specified
channel (the command "show wireless regulatory" shows the max power
allowed).
short-gi (enable)
Short GI value for both the 20 MHz and the 40 MHz channels for the 11n Radio.
• enable – enables the capability.
short-preamble
Enables short preamble support.
NOTE: Disables support for long preamble. Mobile Units that only support long
preamble will not be able to associate.
speed
Configures the basic and supported data rates.
• 1 1-Mbps.
• 11 11-Mbps.
• 12 12-Mbps.
• 18 18-Mbps.
• 2 2-Mbps.
• 24 24-Mbps.
• 36 36-Mbps.
• 48 48-Mbps.
• 54 54-Mbps.
• 5.5 5.5-Mbps.
• 6 6-Mbps.
• 9 9-Mbps.
• basic1 basic 1-Mbps.
• basic11 basic 11-Mbps.
• basic11a rate set (6,12,24 Mbps)
• basic11an rate set (6,12,24, MCS 0-7)
• basic11b1 rate set (1 and 2 Mbps)
• basic11b2 rate set (1,2,5.5,11 Mbps)
• basic11/jointfilesconvert/1441181/bg rate set (1,2,5.5,11,6,12,24 Mbps)
• basic11/jointfilesconvert/1441181/bgn rate set (1,2,5.5,11,6,12,24, MCS 0-7)
• basic11g rate set (6,12,24 Mbps)
• basic11gn rate set (6,12,24, MCS 0-7)
• basic11n rate set (MCS 0-7)
• basic12 basic 12-Mbps.
• basic18 basic 18-Mbps.
• basic2 basic 2-Mbps.
• basic24 basic 24-Mbps.
• basic36 basic 36-Mbps.
• basic48 basic 48-Mbps.
• basic54 basic 54-Mbps.
• basic5p5 basic 5.5-Mbps.
• basic6 basic 6-Mbps.
• basic9 basic 9-Mbps.
• default Factory default rates based on radio type.
• range All rates enabled, the lowest one set to basic.
• throughput All rates basic (note: only g clients allowed on 11/jointfilesconvert/1441181/bg radios).
Comentarios a estos manuales