Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 346

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 607
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 345
332 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Interface Config commands
12
static-channel-group
Interface Config commands
Use this command to add an interface to a static channel group.
Syntax
static-channel-group <1-4>
Parameters
Usage Guidelines
This command aggregates individual giga port’s into a single aggregate link to provide a larger
bandwidth. The static channel group is used to provide additional bandwidth in multiples of 1Gbps
on the switch. All MAC layer and higher protocols see only the static channel group (aggregate link)
rather than the individual ports that comprise it.
Example
RFS7000(config-if)#static-channel-group 2
RFS7000(config-if)#
<1-4>
Static channel group to associate the link with.
Vista de pagina 345
1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 606 607

Comentarios a estos manuales

Sin comentarios