Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario descargar pdf (Pagina 225)

100

101

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 211

53-1001945-01

Global Configuration Commands

Parameters

Example

RFS7000(config)#redundancy discovery-period 20

RFS7000(config)#

RFS7000(config)#redundancy handle-stp enable

RFS7000(config)#

RFS7000(config)#redundancy heartbeat-period 20

RFS7000(config)#

auto-revert (enable)

Enables auto-revert

auto-revert-period

<1-1800>

Sets the redundancy auto-revert delay interval.

• <1-1800> – Auto-revert delay interval in mins (default is 5).

critical-resource-ip

<A.B.C.D>

Sets the critical resource IP address.

• A.B.C.D – IP address of the critical resource.

dhcp-server (enable)

Enables DHCP Redundancy protocol.

discovery-period

Sets the redundancy discovery interval.

• <10-60> – Discovery time in secs (default is 30).

dynamic-ap-load-balance

[enable|

per-ap-mu-threshold|schedu

le-interval|schedule-start-ti

me|trigger]

Configures dynamic AP load balance parameters

• enable – Enables dynamic AP load balance feature.

• per-ap-mu-threshold – Specifies per AP MU threshold count.

• schedule-interval – Specifies Dynamic AP Load Balance interval in days in the

range <1-366>.

• schedule-start-time – Specifies dynamic AP load balance start time.

• trigger [runtime|schedule] – Specifies the type of trigger for AP load balance.

• runtime – Sets the trigger based on runtime trigger.

• schedule – Sets the trigger at the configured schedule time,

enable

Enables the redundancy protocol.

group-id

Sets the redundancy/cluster group Id.

• <1-65535> – Redundancy group Id.

handle-stp

Delays the redundancy protocol state machine exec, considering STP.

• enable – Sets handle-stp value as true.

heartbeat-period

Sets the redundancy heartbeat interval.The heartbeat-period must always be

less than the

hold-period.

• <1-255> – Heartbeat interval in secs (default is 5).

hold-period

Sets the redundancy hold interval.

• <103-255> – Hold interval in secs (default is 15).

interface-ip

Sets the redundancy interface IP address.

• A.B.C.D – IP address of the switch.

manual-revert

Reverts standby to non-active mode.

member-ip

Adds a member to this redundancy group.

• A.B.C.D – IP address of the member.

mode

Sets the switch mode to either primary or standby.

• primary – Defines mode as primary.

• standby – Defines mode as standby.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 606 607

Comentarios a estos manuales

Sin comentarios

Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 225

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility RFS7000-GR Controller CLI Reference Guide