
364 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Extended ACL Config Commands
14
no
Extended ACL Config Commands
Use this command to negate a command or set its defaults.
Syntax
no(deny|mark|permit)
NOTE
This command negates all the syntax combinations used in deny, mark and permit commands to
configure the Extended ACL.
Parameters
Usage Guidelines
Use the
no command to remove an access list control entry. Provide the rule-precedence value
when using the no command.
Example
RFS7000(config-ext-nacl)#no mark 8021p 5 tcp 192.168.2.0/24 any rule-precedence
10
RFS7000(config-ext-nacl)#
RFS7000(config-ext-nacl)#no permit ip any any rule-precedence 10
RFS7000(config-ext-nacl)#
RFS7000(config-ext-nacl)#no deny icmp any any rule-precedence 10
RFS7000(config-ext-nacl)#
deny
Specifies packets to reject.
mark
Specifies packets to mark.
permit
Specifies packets to forward.
Comentarios a estos manuales