Brocade Mobility RFS7000-GR Controller CLI Reference Guide 319
53-1001945-01
Interface Config commands
12
RFS7000(config-if)#
RFS7000(config-if)#ip address 192.168.234.1/24
RFS7000(config-if)#
Follow the steps in the example below to create a helper address on VLAN 2000 for using the
DHCP server available on VLAN 1000:
RFS7000(config)#interface vlan 1000
RFS7000(config-if)#ip address 172.168.100.1/24
RFS7000(config-if)#interface vlan 2000
RFS7000(config-if)#ip address 172.168.200.1/24
RFS7000(config-if)#ip helper-address 172.168.100.10 vlan 1000
RFS7000(config-if)#
The example below displays static NAT source translation.
RFS7000(config)#interface vlan 1000
RFS7000(config-if)#ip nat inside
RFS7000(config-if)#interface vlan 2000
RFS7000(config-if)#ip nat outside
RFS7000(config)#ip nat inside source static 172.168.200.10 157.235.205.57
RFS7000(config)#
Comentarios a estos manuales