Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario descargar pdf (Pagina 208)

100

101

194 Brocade Mobility RFS7000-GR Controller CLI Reference Guide

53-1001945-01

Global Configuration Commands

• std-nacl — Standard ACL. For more details see Standard ACL Instance on page 373.

• dhcp – DHCP Server instance. For more details see DHCP Server Instance on page 401.

• dhcpclass – DHCP User Class instance. For more details see DHCP Class Instance on page

437

• Use clear command to clear the ip dhcp binding.

NOTE

To delete Standard/Extended and MAC ACL use no access-list <access-list name> under the

Global Config mode.

Network Address Translation (NAT) allows a single device to act as a gateway for internal LAN

clients. It translates the clients internal network IP adresses into the IP address of the NAT enabled

device.

Brocade Mobility RFS7000-GR Controller supports port NAT and static NAT.

Static NAT allows host on a private network and is accessible through internet using public IP’s.

Static NAT assigns a public IP to a host on a private network. It allows a host on a public network to

communicate with the host on the private network, using its public IP.

Port NAT maps multiple local addresses to a single global address and dynamic port numbers.

Use

ip nat inside to mark VLAN interfaces as an inside interface. The keyword inside defines

the VLAN interface as internal interface. This command is used in the

(config-if) mode, check

ip on page 318 for more detials.

Usage Guidelines 2

Follow the steps below to create a DHCP User Class:

1. Create a DHCP class named

RFS7000DHCPclass. The Brocade Mobility RFS7000-GR Controller

supports a maximum of 32 DHCP classes.

RFS7000(config)#ip dhcp class RFS7000DHCPclass

RFS7000(config-dhcpclass)#

2. Create a USER class named MC800. The privilege mode changes to (config-dhcpclass). The

Brocade Mobility RFS7000-GR Controller supports a maximum of 8 Users classes per DHCP

class.

RFS7000(config-dhcpclass)#option user-class MC800

RFS7000(config-dhcpclass)#

3. Create a Pool named WID, using (config)# mode.

RFS7000(config)#ip dhcp pool WID

RFS7000(config-dhcp)#

4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The switch

supports association of only 8 CDHCP classes with a pool.

RFS7000(config-dhcp)#class RFS7000DHCPclass

RFS7000(config-dhcp-class)#

5. The switch leads you to a new mode (config-dhcp-class). Use this mode to add an address

range used for the DHCP class, associated with the pool.

RFS7000(config-dhcp-class)#address range 11.22.33.44

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 606 607

Comentarios a estos manuales

Sin comentarios

Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 208

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility RFS7000-GR Controller CLI Reference Guide