Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 338

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 607
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 337
324 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Interface Config commands
12
port-channel
Interface Config commands
Use this command to select the load-balance criteria of an aggregated port.
Syntax
port-channel (load-balance [src-dst-ip|src-dst-mac])
Parameters
Usage Guidelines
Use this command to configure and set the load balance to the aggregated port using
(config-if) static-channel-group.
Example
The example below creates a channel group 1 with interface ge1 and ge 2.
RFS7000(config)#interface ge1
RFS7000(config-if)#static-channel-group 1
RFS7000(config)#interface ge2
RFS7000(config-if)#static-channel-group 1
The example below defines the load balance based on the IP or MAC address.
RFS7000(config)#interface sa1
RFS7000(config-if)#port-channel load-balance src--dst-ip
RFS7000(config-if)#
load-balance
[src-dst-ip|src-dst-mac]
Sets load-balancing for port channel.
src-dst-ip – Source and Destination IP address based load balancing.
src-dst-mac – Source and Destination MAC address based load balancing
Vista de pagina 337
1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 606 607

Comentarios a estos manuales

Sin comentarios